<kuid:542976:102186> Norris 4-2-0 Interior (TS12)

Тип: Кабина
Опубликовано: 6.10.2025 0:10:46
Скачиваний: 7
Размер: 1.4 MB

Скачать

Cabin for Norris 4-2-0. Per the prototype, no steam gauges, injectors or sight glasses are included. It does, however, have the 1830s operational equivalents of each (Salter safety valve, mechanical water pumps and try cocks, respectively.)

mesh by bdaneal
reworked/cloned by gramma

config.txt:

category-class                          "ZI"
category-region                         "US;CA;MX;AT;UK;DE;CU"
category-era                            "1830s;1840s;1850s"
script                                  "NorrisCabin"
class                                   "NorrisCabin"
cameralist
{
  camera0                               -0.588,0.291,0.3,0,0
  camera1                               -0.835,-0.403,-0.158,0.341,-0.631
  camera2                               -0.341,0.466,0.314,0.308,-0.572
  camera3                               -0.737,0.437,0.314,2.838,-0.172
}
cameradefault                           0
author                                  "Ben Neal"
organisation                            "Sub-Par Productions"
contact-email                           "bdaneal@yahoo.com"
contact-website                         "www.steammachine.com/bdaneal"
license                                 "Feel free to reskin this and release it when and wherever you like as freeware. All I ask is that you indicate where to find the original package and also include the original readme which credits the authors who have contributed to the creation of this asset. This asset may not be used by any payware content without permission."
mesh-table
{
  default
  {
    mesh                                "norris_cabin.im"
    auto-create                         1
  }
  regulator
  {
    mesh                                "regulator.im"
    anim                                "regulator.kin"
    auto-create                         1
    limits                              0,1
    kind                                "animated-lever"
    test-collisions                     0
    mousespeed                          -1
  }
  regulator-collision-box
  {
    mesh                                "hitbox.im"
    att-parent                          "regulator"
    att                                 "a.thr_grab"
    auto-create                         1
    kind                                "collision-proxy"
    opacity                             0
    collision-parent                    "regulator"
  }
  boiler_needle
  {
    kind                                "animated-dial"
    mesh                                "bpgauge.im"
    anim                                "bpgauge.kin"
    limits                              0,625
    auto-create                         1
  }
  reverser
  {
    mesh                                "reverser.im"
    anim                                "reverser.kin"
    auto-create                         1
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "animated-lever"
    test-collisions                     0
    mousespeed                          -1
  }
  reverser-collision-box
  {
    mesh                                "hitbox.im"
    att-parent                          "reverser"
    att                                 "a.rev_grab"
    auto-create                         1
    kind                                "collision-proxy"
    opacity                             0
    collision-parent                    "reverser"
  }
  watervalve0
  {
    mesh                                "injector.im"
    att                                 "a.injector1"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notchheight                         1,1,1,1,1
    angles                              0,-0.5
  }
  watervalve1
  {
    mesh                                "injector.im"
    att                                 "a.injector2"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    angles                              0,0.5
  }
  fire_plates
  {
    mesh                                "fireplates.im"
    anim                                "fireplates.kin"
    auto-create                         1
    limits                              0,1
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "animated-lever"
    test-collisions                     0
    mousespeed                          -1
  }
  fire_plates-collision-box
  {
    mesh                                "hitbox.im"
    att-parent                          "fire_plates"
    att                                 "a.fbgrip"
    auto-create                         1
    kind                                "collision-proxy"
    opacity                             0
    collision-parent                    "fire_plates"
  }
  try_cock1
  {
    mesh                                "trycock.im"
    att                                 "a.try1"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    angles                              0,1
  }
  water1
  {
    mesh                                "water.im"
    anim                                "water.kin"
    att                                 "a.try1"
    att-parent                          "default"
    auto-create                         0
    test-collisions                     0
    animation-loop-speed                1
  }
  try_cock2
  {
    mesh                                "trycock.im"
    att                                 "a.try2"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    angles                              0,1
  }
  water2
  {
    mesh                                "water.im"
    anim                                "water.kin"
    att                                 "a.try2"
    att-parent                          "default"
    auto-create                         0
    test-collisions                     0
    animation-loop-speed                1
  }
  try_cock3
  {
    mesh                                "trycock.im"
    att                                 "a.try3"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    angles                              0,1
  }
  water3
  {
    mesh                                "water.im"
    anim                                "water.kin"
    att                                 "a.try3"
    att-parent                          "default"
    auto-create                         0
    test-collisions                     0
    animation-loop-speed                1
  }
  firebox
  {
    mesh                                "firestuffs/firebox.im"
    auto-create                         1
    kind                                "firebox"
    light                               0
    test-collisions                     0
  }
  fire
  {
    mesh                                "firestuffs/fire.im"
    auto-create                         1
    light                               0
    test-collisions                     0
  }
  coal
  {
    mesh                                "firestuffs/coal.im"
    auto-create                         1
    light                               0
    test-collisions                     0
  }
  fireglow
  {
    mesh                                "firestuffs/fireglow.im"
    auto-create                         1
    light                               0
    test-collisions                     0
  }
}
obsolete-table
{
}
description                             "Cabin for Norris 4-2-0. Per the prototype, no steam gauges, injectors or sight glasses are included. It does, however, have the 1830s operational equivalents of each (Salter safety valve, mechanical water pumps and try cocks, respectively.)

mesh by bdaneal
reworked/cloned by gramma"
trainz-build                            3.5
username                                "Norris 4-2-0 Interior (TS12)"
kind                                    "interior"
outside-visible-from-cabin              1
cabin-visible-from-outside              1
thumbnails
{
  0
  {
    width                               240
    height                              180
    image                               "thumbnail.jpg"
  }
}
kuid                                    <kuid:542976:102186>
kuid-table
{
}

Файлы:

env_metal.texture.txt	32 B
firestuffs
firestuffs / coal.im	2.4 kB
firestuffs / coalfire.texture.txt	31 B
firestuffs / fireglow.im	876 B
firestuffs / fire.im	880 B
firestuffs / firebox.im	2.1 kB
firestuffs / flame_test2.texture.txt	34 B
firestuffs / firebox_glow-firebox_glow_op.texture.txt	62 B
firestuffs / vtfirebox.texture.txt	32 B
firestuffs / firebox_glow_op.bmp	12.1 kB
firestuffs / firebox_glow.tga	12.0 kB
firestuffs / coalfire.tga	96.0 kB
firestuffs / flame_test2.tga	128.0 kB
firestuffs / vtfirebox.tga	768.0 kB
sound
sound / cabin.txt	217 B
sound / coal_into_firebox3.wav	41.7 kB
sound / coal_into_firebox2.wav	51.9 kB
sound / boiler_blow_down.wav	79.7 kB
sound / coal_into_firebox1.wav	64.7 kB
sound / firebox_close.wav	23.6 kB
sound / metal_footstep_left.wav	13.1 kB
sound / firebox_open.wav	16.3 kB
sound / coal_shovel1.wav	101.4 kB
sound / metal_footstep_right.wav	13.1 kB
sound / coal_shovel2.wav	64.2 kB
sound / shovel_hit.wav	20.2 kB
sound / fire_roar.wav	72.6 kB
sound / coal_shovel_into_combined.wav	97.4 kB
sound / regulator2.wav	43.7 kB
sound / reverser.wav	72.3 kB
bpgauge.kin	2.2 kB
fireplates.kin	4.1 kB
bpgauge.im	15.6 kB
fireplates.im	12.2 kB
hitbox.im	1.2 kB
env_metal.bmp	12.1 kB
norris_interior.texture.txt	38 B
injector.im	2.2 kB
norriscabin.gs	4.3 kB
regulator.kin	2.2 kB
reverser.kin	4.3 kB
reverser.im	10.7 kB
regulator.im	20.4 kB
norris_cabin.im	69.0 kB
trycock.im	4.9 kB
water.im	6.1 kB
water.kin	5.8 kB
water.texture.txt	28 B
thumbnail.jpg	9.4 kB
water.tga	12.0 kB
norris_interior.tga	1.0 MB
Общий объём файлов:	3.0 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:542976:102186>	interior	Norris 4-2-0 Interior (TS12)	3.5	6.10.2025 0:10:46	1.4 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет