<kuid2:542976:100161:1> Interior for SD59-MX CSX YN3B

Тип: Кабина
Опубликовано: 20.06.2023 2:03:46
Скачиваний: 42
Размер: 10.9 MB

Скачать

Interior for SD59-MX also know as SD59-M2, CSX YN3B.

config.txt:

username                                "Interior for SD59-MX CSX YN3B"
kind                                    "interior"
cameradefault                           0
description                             "Interior for SD59-MX also know as SD59-M2, CSX YN3B."
trainz-build                            3.5
author                                  "davesnow"
organisation                            "-"
contact-email                           "-"
contact-website                         "-"
category-region                         "AT"
category-era                            "1950s"
license                                 "This item is supplied free of charge for personal use by registered users of Trainz. It or its contents must not be modified, offered for sale or supplied as any part of a Payware package or provided for downloading on any site other than Auran unless this is expressly permitted in writing by the author davesnow / David E. Snow.


DISCLAIMER: It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item."
category-class                          "ZX"
cameralist
{
  camera0                               -1.084,-6.373,4.073,-6.282,-0.2
  camera1                               -1.115,-6.322,4.029,-20.138,-0
  camera2                               -1.117,-5.772,3.923,-21.794001,-0.19
  camera3                               -0.723,-5.885,4.218,-24.958,-0.19
  camera4                               0.122,-5.738,4.064,-25.134001,0
  camera5                               0.656,-7.298,4.064,-25.124001,0
  camera6                               0.985,-6.268,4.064,-25.200001,-0.13
  camera7                               1.082,-6.432,3.93,-23.826,-0.13
  camera8                               1.046,-5.687,3.885,-22.412001,-0
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "thumbnail csx.jpg"
    width                               1280
    height                              800
  }
}
mesh-table
{
  default
  {
    mesh                                "SD59MX_INTERIOR_DES.im"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle.im"
    att                                 "a.throttle"
    limits                              0,8
    angles                              -0.61,0.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    auto-create                         1
    mousespeed                          -1
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "train_brake.im"
    att                                 "a.trainbrake0"
    limits                              0,4
    angles                              -0.69,1.04
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,2,2,2
    mousespeed                          1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser.im"
    att                                 "a.reverser"
    limits                              0,2
    angles                              0.69,-0.69
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          1
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "digital-dial-spd"
    att                                 "a.digispeedo"
    mesh                                "digitalreadout.im"
    font                                "impact"
    fontsize                            0.04
    fontcolor                           203,0,0
    auto-create                         1
  }
  speedo_needle2
  {
    kind                                "needle"
    mesh                                "speedo_needle.im"
    att                                 "a.speed0"
    limits                              0,43
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "ind_brake.im"
    att                                 "a.indbrake0"
    limits                              0,32
    angles                              -0.87,0.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.15
    att-parent                          "default"
  }
  horn
  {
    kind                                "button"
    mesh                                "horn.im"
    att                                 "a.horn"
    auto-create                         1
    angles                              -0,0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.switch"
    mesh                                "switch.im"
    limits                              0,1
    angles                              0,2
    notches                             1,0
    notchheight                         0.1,0.1
    auto-create                         1
  }
  window_right_front
  {
    kind                                "lever"
    mesh                                "Window_Right_Front.im"
    att                                 "a.right_front"
    limits                              0,32
    angles                              -0,0.0113
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          -1
    radius                              0.35
    auto-create                         1
  }
  window_left_front
  {
    kind                                "lever"
    mesh                                "Window_Left_Front.im"
    att                                 "a.left_front"
    limits                              0,32
    angles                              0,-0.0113
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          -1
    radius                              0.35
    auto-create                         1
  }
  window_right_rear
  {
    kind                                "lever"
    mesh                                "Window_Right_Rear.im"
    att                                 "a.right_rear"
    limits                              0,32
    angles                              0,-0.0113
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          -1
    radius                              0.35
    auto-create                         1
  }
  window_left_rear
  {
    kind                                "lever"
    mesh                                "Window_Left_Rear.im"
    att                                 "a.left_rear"
    limits                              0,32
    angles                              0.0113,0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          -1
    radius                              0.35
    auto-create                         1
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "ampmeter_needle.im"
    att                                 "a.ammeter"
    limits                              0,1500
    angles                              0,1.9
    auto-create                         1
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "whitepress_needle.im"
    att                                 "a.equaliser_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "redpress_needle.im"
    att                                 "a.main_res_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "redpress_needle.im"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "whitepress_needle.im"
    att                                 "a.brake_pipe_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
}
kuid                                    <kuid2:542976:100161:1>
kuid-table
{
}

Файлы:

sound
sound / cabin.txt	574 B
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / lever_5.wav	18.3 kB
sound / light_switch.wav	30.4 kB
sound / notch_1.wav	2.8 kB
sound / reverser.wav	10.4 kB
sound / air_horn_3.wav	177.1 kB
sound / switch_6.wav	11.6 kB
sound / throttle.wav	4.0 kB
sound / window.wav	74.0 kB
ampmeter_needle.im	688 B
cab art for interior 2.texture.txt	45 B
cab art for interior 4.texture.txt	45 B
cab art for interior 3.texture.txt	45 B
cab art for interior.texture.txt	43 B
cab art for interior 5.texture.txt	45 B
digitalreadout.im	1.3 kB
$screenshot$.jpg	45.9 kB
fuel tank and miscell.texture.txt	44 B
horn.im	1.1 kB
ind_brake.im	14.2 kB
redpress_needle.im	952 B
reverser.im	5.3 kB
sd59mx_interior_des.im	664.4 kB
side art.texture.txt	31 B
speedo_needle.im	1.2 kB
switch.im	2.9 kB
throttle.im	10.6 kB
train_brake.im	11.7 kB
whitepress_needle.im	1.7 kB
window_left_front.im	2.8 kB
window_left_rear.im	2.8 kB
window_right_front.im	2.8 kB
window_right_rear.im	2.8 kB
thumbnail csx.jpg	188.0 kB
fuel tank and miscell.tga	3.0 MB
cab art for interior 5.tga	12.0 MB
cab art for interior 4.tga	12.0 MB
side art.tga	16.0 MB
cab art for interior 2.tga	12.0 MB
cab art for interior.tga	12.0 MB
cab art for interior 3.tga	12.0 MB
Общий объём файлов:	80.3 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:542976:100161:1>	interior	Interior for SD59-MX CSX YN3B	3.5	20.06.2023 2:03:46	10.9 MB
<kuid:542976:100161>	interior	Interior for SD59-MX CSX YN3B	3.5	18.10.2021 19:27:11	11.0 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:542976:100160>	#542976	traincar	CSX SD59MX YN3B	3.5	18.10.2021 19:04:12	6.8 MB
<kuid2:542976:100160:1>	#542976	traincar	CSX SD59MX YN3B	3.5	20.06.2023 2:03:46	6.7 MB