<kuid2:404575:45:1> Cab_107_004-4

Тип: Кабина
Опубликовано: 13.06.2020 19:17:15
Скачиваний: 29
Размер: 4.8 MB

Скачать

cab for BR107 004-4
original by Dikobraz64
> http://dikobraz64.xf.cz/
repaint by CJ187
> http://ecsjoko.eu

config.txt:

category-class                          "ZI"
cameradefault                           0
description                             "cab for BR107 004-4
original by Dikobraz64
> http://dikobraz64.xf.cz/
repaint by CJ187
> http://ecsjoko.eu"
kind                                    "interior"
category-region-0                       "IQ"
category-region-1                       "CS"
category-region-2                       "CZ"
category-era-0                          "1960s"
category-era-1                          "1970s"
category-era-2                          "1980s"
category-era-3                          "1990s"
category-era-4                          "2000s"
trainz-build                            2.4
cameralist
{
  camera0                               -1.15,0,-0.1
  camera1                               -1.08,0.7,0.25
  camera2                               -0.5,0.3,0.2
  camera3                               -1.4,0,0
  camera4                               1.4,0,0
  camera5                               0.5,0.3,0.2
  camera6                               1.08,0.7,0.25
  camera7                               1.15,0,-0.1
}
mesh-table
{
  default
  {
    mesh                                "Cab.IM"
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "tacho.IM"
    att                                 "a.tacho"
    limits                              0,25
  }
  throttle_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "throttle.im"
    att                                 "a.throttle0"
    limits                              0,8
    angles                              0.013,-1.57
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1.25,1,1,1,1,1,1,1,1
    radius                              0.22
    mousespeed                          -1
    att-parent                          "default"
  }
  throttle_lever1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "throttle.im"
    att                                 "a.throttle1"
    limits                              0,9
    angles                              0,-1.31
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0.25,1,1,1,1,1,1,1,1
    radius                              0.22
    mousespeed                          -1
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "revers.im"
    att                                 "a.reverser"
    limits                              0,2
    angles                              -0.8,0.5
    notches                             0,0.5,1
    notchheight                         4,4,4
    radius                              0.15
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vlak.im"
    att                                 "a.vlak"
    limits                              0,4
    angles                              -0.785,-3.665
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         2,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    mousespeed                          -0.75
    radius                              0.12
    att-parent                          "default"
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "nezav.im"
    att                                 "a.nezav"
    limits                              0,32
    angles                              -0.52,-2.09
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,1
    mousespeed                          -0.75
    radius                              0.12
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "mano_black.im"
    att                                 "a.mano0"
    limits                              0,1000
    att-parent                          "default"
    angles                              0.524,4.974
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "mano_black.im"
    att                                 "a.mano1"
    limits                              0,1000
    att-parent                          "default"
    angles                              0.524,4.974
  }
  bplocomain_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "mano_red.im"
    att                                 "a.mano0a"
    limits                              0,1000
    att-parent                          "default"
    angles                              0.524,4.974
  }
  bploco_equaliser
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "mano_red.im"
    att                                 "a.mano1a"
    limits                              0,1000
    att-parent                          "default"
    angles                              0.524,4.974
  }
  independantbrake_lever1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "nezav.im"
    att                                 "a.nezav1"
    limits                              0,32
    angles                              0,-1.5
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,1
    mousespeed                          -1
    radius                              0.12
    att-parent                          "default"
  }
  horn
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "houk.im"
    att                                 "a.houk"
    limits                              0,1
    angles                              0,0.085
    notches                             0,1
    notchheight                         3,3
    att-parent                          "default"
    mousespeed                          -3
  }
  start
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "start.im"
    att                                 "a.start"
    limits                              0,1
    angles                              0,0.085
    notches                             0
    notchheight                         0,0
    att-parent                          "default"
    mousespeed                          -3
  }
  stop
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "stop.im"
    att                                 "a.stop"
    limits                              0,1
    angles                              0,0.085
    notches                             0
    notchheight                         0,0
    att-parent                          "default"
    mousespeed                          -3
  }
  rucni_brzda
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "ruckolo.im"
    att                                 "a.ruckolo"
    angles                              0,18.85
    mousespeed                          1
    radius                              0.3
    att-parent                          "default"
  }
  ampmeter_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "ampmeter.IM"
    att                                 "a.amp1"
    limits                              0,500
    angles                              0.087,0.785
    att-parent                          "default"
  }
  ampmeter2_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "ampmeter.IM"
    att                                 "a.amp2"
    limits                              0,900
    angles                              0.4,0.78
    att-parent                          "default"
  }
  tlak
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "termo1.IM"
    att                                 "a.termo0"
    limits                              0,1000
  }
  teplota1
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "termo.IM"
    att                                 "a.termo1"
    limits                              0,1200
  }
  teplota2
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "termo2.IM"
    att                                 "a.termo2"
    limits                              0,600
    angles                              0,1.05
    value                               120
  }
  light_switch
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.prep07"
    mesh                                "prep_crn.im"
    limits                              0,1
    angles                              0,0.785
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          -1
  }
  switch0
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.prep01"
    mesh                                "prep_crn.im"
    limits                              0,2
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.01
    mousespeed                          -1
  }
  switch1
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.prep02"
    mesh                                "prep_crn.im"
    limits                              0,2
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.01
    mousespeed                          -1
  }
  switch2
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.prep03"
    mesh                                "prep_zel.im"
    limits                              0,2
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.01
    mousespeed                          -1
  }
  switch3
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.prep04"
    mesh                                "prep_crn.im"
    limits                              0,2
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.01
    mousespeed                          -1
  }
  switch4
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.prep05"
    mesh                                "prep_crn.im"
    limits                              0,2
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.01
    mousespeed                          -1
  }
  switch5
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.prep06"
    mesh                                "prep_zel.im"
    limits                              0,2
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.01
    mousespeed                          -1
  }
  switch6
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.prep08"
    mesh                                "prep_zel.im"
    limits                              0,2
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.01
    mousespeed                          -1
  }
  switch7
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.prep09"
    mesh                                "prep_crn.im"
    limits                              0,2
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.01
    mousespeed                          -1
  }
  door
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.dvere"
    mesh                                "dvere.IM"
    limits                              0,1
    angles                              0,-1.6
    notches                             0,1
    notchheight                         0,0
    radius                              -0.2
    mousespeed                          -1
  }
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               "400"
    height                              "206"
  }
}
asset-filename                          "Cab_107_004-4"
username                                "Cab_107_004-4"
author                                  "Dikobraz64"
license                                 "free for non comercial use only"
kuid                                    <kuid2:404575:45:1>
kuid-table
{
}

Файлы:

$screenshot$.jpg	22.7 kB
720.bmp	768.1 kB
720.texture.txt	26 B
720.tga	768.0 kB
720cab.bmp	3.0 MB
720cab.texture.txt	29 B
720cab.tga	3.0 MB
720_podlaha.texture.txt	34 B
720_podlaha.tga	768.0 kB
a4a.texture.txt	26 B
a4a.tga	48.0 kB
ampmeter.im	740 B
brzdic2.texture.txt	30 B
brzdic2.tga	192.0 kB
cab.im	452.7 kB
d64 okno.texture.txt	31 B
d64 okno.tga	48.0 kB
dvere.im	31.3 kB
graf.texture.txt	27 B
graf.tga	256.0 kB
hasicak.texture.txt	30 B
hasicak.tga	192.0 kB
houk.im	1.0 kB
latka.bmp	384.1 kB
latka.texture.txt	28 B
mano_black.im	836 B
mano_red.im	1.4 kB
nezav.im	9.4 kB
oknoram.texture.txt	30 B
oknoram.tga	192.0 kB
palubka.texture.txt	30 B
palubka.tga	768.0 kB
palubka2.texture.txt	31 B
palubka2.tga	192.0 kB
popisky alfa.bmp	65.1 kB
popisky-popisky alfa.texture.txt	54 B
popisky.tga	192.0 kB
prep_crn.im	2.1 kB
prep_zel.im	2.1 kB
revers.im	6.5 kB
ruckolo.im	31.6 kB
rychl.texture.txt	28 B
rychl.tga	192.0 kB
rychlpaka.texture.txt	32 B
rychlpaka.tga	96.0 kB
skin.texture.txt	27 B
skin.tga	192.0 kB
sound
sound / bzum.wav	1.5 kB
sound / cabin.txt	855 B
sound / click.wav	2.0 kB
sound / door.wav	5.0 kB
sound / electric.wav	7.8 kB
sound / light.wav	21.8 kB
sound / notch_1.wav	2.8 kB
sound / reverser.wav	10.4 kB
sound / throttle.wav	4.0 kB
start.im	1.0 kB
stop.im	1.0 kB
tacho.im	1.5 kB
ter.texture.txt	26 B
ter.tga	96.0 kB
termo.im	1.1 kB
termo1.im	1.1 kB
termo2.im	1.1 kB
throttle.im	13.3 kB
vlak.im	16.7 kB
vn.texture.txt	25 B
vn.tga	256.0 kB
Общий объём файлов:	12.2 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:404575:45:1>	interior	Cab_107_004-4	2.4	13.06.2020 19:17:15	4.8 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет