<kuid:400089:233> UZ_CHS2 interior

Тип: Кабина
Опубликовано: 25.10.2021 20:41:04
Скачиваний: 621
Размер: 26.1 MB
Скачать

config.txt:
kuid                                    <kuid:400089:233>
username                                "UZ_CHS2 interior"
kind                                    "interior"
cameradefault                           0
category-class                          "ZI"
author                                  "theSEWEGI; Mongol"
trainz-build                            3.7
interior-controls-type                  "full"
enable-shadows-in-cab                   1
outside-visible-from-cabin              0
script                                  "chs2_cabina"
class                                   "chs2_cabina"
mesh-table
{
  default
  {
    mesh                                "chs2cab.IM"
    auto-create                         1
    effects
    {
      cab1
      {
        kind                            "texture-replacement"
        texture                         "cab1.texture"
      }
      cab2
      {
        kind                            "texture-replacement"
        texture                         "cab2.texture"
      }
      cab3
      {
        kind                            "texture-replacement"
        texture                         "cab3.texture"
      }
      cab8
      {
        kind                            "texture-replacement"
        texture                         "cab8.texture"
      }
      cab9
      {
        kind                            "texture-replacement"
        texture                         "cab9.texture"
      }
      window
      {
        kind                            "texture-replacement"
        texture                         "window.texture"
      }
    }
  }
  butil
  {
    mesh                                "butil.im"
    auto-create                         1
    att                                 "a.tifon"
    orientation                         0,0,0
    position                            0.06,-0.07,0.02
    anim                                "butil.kin"
  }
  pomoha
  {
    mesh                                "pom.im"
    anim                                "pom.kin"
    auto-create                         0
    animation-loop-speed                1
    att                                 "a.pomoha_cab1"
    mesh-asset                          <kuid:567242:374>
  }
  tabl_pult
  {
    mesh                                "tabl_pult.im"
    auto-create                         1
  }
  pegas
  {
    mesh                                "pegas.im"
    auto-create                         1
  }
  steklo
  {
    mesh                                "steklo.im"
    auto-create                         1
  }
  attach
  {
    mesh                                "attach_mesh.im"
    auto-create                         1
  }
  box
  {
    mesh                                "box.im"
    auto-create                         1
  }
  reverser1
  {
    kind                                "lever"
    mesh                                "op_lever.im"
    auto-create                         1
    att                                 "a.revers_cab1"
    limits                              0,2
    angles                              -0.6,0.55
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.14
  }
  trainbrake_lever2
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "395.im"
    att                                 "a.valve_395_cab1"
    limits                              0,4
    angles                              0.1,-3
    notches                             0.21,0.35,0.55,0.66,0.88,1
    notchheight                         1,1,2,1,2,1
    mousespeed                          -0.2
  }
  independantbrake_lever2
  {
    mesh                                "254.im"
    att                                 "a.valve_254_cab1"
    auto-create                         1
    kind                                "lever"
    att-parent                          "default"
    angles                              3.4,0.2
    limits                              0,32
    notches                             0,0.4,0.6,0.765,1
    notchheight                         1,2,2,2,1
    mousespeed                          -0.2
  }
  shturval
  {
    mesh                                "shturval.IM"
    kind                                "lever"
    att                                 "a.controller_cab1"
    auto-create                         1
    angles                              0,5.495
    limits                              0,42
    notches                             0,0.024,0.048,0.072,0.096,0.12,0.144,0.168,0.192,0.216,0.24,0.264,0.288,0.312,0.336,0.36,0.384,0.4,0.432,0.456,0.48,0.5,0.528,0.552,0.576,0.6,0.62,0.648,0.672,0.696,0.72,0.744,0.768,0.792,0.816,0.84,0.864,0.888,0.912,0.936,0.96,0.984,1
    notchheight                         1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    att-parent                          "attach"
    test-collisions                     1
    mousemode                           "exact"
    mousespeed                          0.1
  }
  strelka
  {
    mesh                                "strelka.IM"
    kind                                "needle"
    att                                 "a.controller_cab1"
    auto-create                         1
    angles                              0,4.712
    limits                              0,42
    att-parent                          "attach"
    test-collisions                     0
  }
  handbrake
  {
    mesh                                "handbrake.IM"
    kind                                "lever"
    att                                 "a.handbrake_cab1"
    auto-create                         1
    angles                              0,8
    limits                              0,40
    att-parent                          "default"
    test-collisions                     1
    tooltip-token                       "handbrake"
    mousespeed                          0.1
  }
  strelka_skor
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedneedle.im"
    att                                 "a.speedo_needle"
    limits                              0,150
    angles                              0,4.14
    att-parent                          "default"
  }
  clock_h
  {
    mesh                                "hour_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,1
    angles                              -3.1415,3.1415
    att-parent                          "default"
  }
  clock_m
  {
    mesh                                "clock.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,60
    angles                              0,6.283
    att-parent                          "default"
  }
  bplocomain_needle
  {
    mesh                                "needle_black.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.meter_9481"
    limits                              0,1700
    att-parent                          "default"
    angles                              0,4.55
  }
  bptrainbrakepipe_needle
  {
    mesh                                "needle_black.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.meter_9501"
    limits                              0,1100
    att-parent                          "default"
    angles                              0,4.7
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "needle_black.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.meter_9452"
    limits                              0,1100
    att-parent                          "default"
    angles                              0,4.7
  }
  bploco_equaliser
  {
    mesh                                "needle_black.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.meter_9491"
    limits                              0,1100
    att-parent                          "default"
    angles                              0,4.7
  }
  ukbm_rb
  {
    mesh                                "rb_btn.im"
    kind                                "button"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb"
    limits                              0,1
    angles                              0.008,0
    mousespeed                          -2
  }
  mv_razruv
  {
    mesh                                "red_button.iM"
    kind                                "button"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pkt_cab1_51"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          -2
  }
  sw_alsn2
  {
    kind                                "switch"
    mesh                                "tumbler_raciy.IM"
    att-parent                          "default"
    att                                 "a.tmb2_cab1"
    auto-create                         0
    limits                              0,1
    angles                              -2.5,-1.1
    tooltip-token                       "sw_alsn2"
  }
  sw_radio
  {
    mesh                                "tumbler_raciy.IM"
    att                                 "a.radio"
    auto-create                         1
    kind                                "lever"
    angles                              -0.4,0.4
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
    tooltip-token                       "sw_radio"
  }
  nakal_pss
  {
    mesh                                "tumbler_raciy.IM"
    att                                 "a.pss_nakal"
    auto-create                         1
    kind                                "lever"
    angles                              2.75,3.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
  }
  epk
  {
    mesh                                "epk_key.im"
    att                                 "a.epk_cab1"
    auto-create                         1
    kind                                "lever"
    angles                              -1.57,0
    limits                              0,1
    att-parent                          "default"
    notches                             0,1
    notchheight                         1,1
    radius                              0.15
    mousespeed                          -1
  }
  ampmeter2_needle
  {
    mesh                                "ka_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.meter_ka1_cab02"
    limits                              0,1000
    angles                              0,0.45
  }
  voltmeter2_needle
  {
    mesh                                "kV_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.meter_kv_cab02"
    limits                              0,400
    angles                              0,0.45
  }
  v_torm
  {
    mesh                                "slim_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.meter_vept_cab1"
    limits                              0,1000
    angles                              -0.71,0.65
  }
  lamp_gu
  {
    kind                                "light"
    mesh                                "lamp_gu.IM"
    att-parent                          "default"
    att                                 "a.wipers"
    auto-create                         0
  }
  lampa_svet1
  {
    mesh                                "lamp_svet.im"
    att-parent                          "default"
    att                                 "a.cablight_0_cab1"
    auto-create                         0
  }
  lampa_svet2
  {
    mesh                                "lamp_svet.im"
    att-parent                          "default"
    att                                 "a.cablight02"
    auto-create                         0
  }
  lampa_svet3
  {
    mesh                                "lamp_svet.im"
    att-parent                          "default"
    att                                 "a.cablight03"
    auto-create                         0
  }
  lampa_svet4
  {
    mesh                                "lamp_svet.im"
    att-parent                          "default"
    att                                 "a.cablight01"
    auto-create                         0
  }
  lampa_svet5
  {
    mesh                                "lamp_svet.im"
    att-parent                          "default"
    att                                 "a.cablight"
    auto-create                         0
  }
  pribory_nolight
  {
    mesh                                "pribory_nolight.IM"
    att                                 "a.wipers"
    att-parent                          "default"
    auto-create                         1
  }
  pribory_light
  {
    mesh                                "pribory_light.IM"
    att                                 "a.wipers"
    att-parent                          "default"
    auto-create                         0
  }
  sl2mlight
  {
    mesh                                "sl2mlight.IM"
    att                                 "a.wipers"
    att-parent                          "default"
    auto-create                         0
  }
  als_0
  {
    mesh                                "green.im"
    att                                 "a.wipers"
    kind                                "light"
    auto-create                         0
  }
  als_1
  {
    mesh                                "yellow.im"
    att                                 "a.wipers"
    kind                                "light"
    auto-create                         0
  }
  als_2
  {
    mesh                                "red_yellow.im"
    att                                 "a.wipers"
    kind                                "light"
    auto-create                         0
  }
  als_3
  {
    mesh                                "red.im"
    att                                 "a.wipers"
    kind                                "light"
    auto-create                         0
  }
  als_4
  {
    mesh                                "white.im"
    att                                 "a.wipers"
    kind                                "light"
    auto-create                         0
  }
  als_kz
  {
    mesh                                "red_yellow.im"
    att                                 "a.wipers"
    kind                                "light"
    auto-create                         0
  }
  pss
  {
    kind                                "light"
    mesh                                "lamp_pss.im"
    att                                 "a.wipers"
    att-parent                          "default"
    auto-create                         0
  }
  propusk
  {
    kind                                "light"
    mesh                                "lamp_propusk.im"
    att                                 "a.light_propusk"
    att-parent                          "default"
    auto-create                         0
  }
  lamp_otpusk
  {
    mesh                                "lamp_S2.im"
    att                                 "a.wipers"
    kind                                "light"
    auto-create                         0
  }
  lamp_perekricha
  {
    mesh                                "lamp_P2.im"
    att                                 "a.wipers"
    kind                                "light"
    auto-create                         0
  }
  lamp_tormoz
  {
    mesh                                "lamp_T2.im"
    att                                 "a.wipers"
    kind                                "light"
    auto-create                         0
  }
  lamp_hod
  {
    kind                                "light"
    mesh                                "lamp_reostat2.IM"
    att                                 "a.wipers"
    att-parent                          "default"
    auto-create                         0
  }
  lamp_vent2
  {
    mesh                                "lamp_mv2.im"
    att                                 "a.lamp_mv2_cab1"
    kind                                "light"
    auto-create                         0
  }
  lamp_vent1
  {
    mesh                                "lamp_mv2.im"
    att                                 "a.lamp_mv1_cab1"
    kind                                "light"
    auto-create                         0
  }
  lamp_compressor
  {
    mesh                                "lamp_mk2.im"
    att                                 "a.lamp_mk1_cab1"
    kind                                "light"
    auto-create                         0
  }
  lamp_compressor2
  {
    mesh                                "lamp_mk2.im"
    att                                 "a.lamp_mk2_cab1"
    kind                                "light"
    auto-create                         0
  }
  sw_gv
  {
    kind                                "lever"
    mesh                                "blokirovka.im"
    att                                 "a.vu_cab1"
    att-parent                          "default"
    auto-create                         0
    limits                              0,1
    angles                              -1.45,0
    notches                             0,1
    notchheight                         1,1
    radius                              0
    mousespeed                          1
    tooltip-token                       "sw_gv"
  }
  sw_ab
  {
    kind                                "lever"
    mesh                                "ab_lever.IM"
    att                                 "a.pkt_805"
    auto-create                         1
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "sw_ab"
  }
  sw_compressor
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_46"
    att-parent                          "default"
    auto-create                         1
    limits                              -1,1
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         1,1,1
    tooltip-token                       "sw_compressor"
  }
  sw_raz1
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_47"
    att-parent                          "default"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5708
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "sw_raz1"
  }
  ws_vodootvod
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_48"
    att-parent                          "default"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5708
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "ws_vodootvod"
  }
  sw_reostat
  {
    kind                                "lever"
    mesh                                "vu_lever.IM"
    att                                 "a.pkt_cab1_37"
    auto-create                         0
    limits                              0,1
    angles                              -1.45,0
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "sw_reostat"
  }
  valve_966
  {
    kind                                "lever"
    mesh                                "valve.im"
    att                                 "a.valve_9681"
    att-parent                          "default"
    auto-create                         1
    limits                              0,2
    angles                              -1.57,0
    tooltip-token                       "valve_966"
    mousemode                           "exact"
  }
  valve_972
  {
    kind                                "lever"
    mesh                                "valve.im"
    att                                 "a.valve_9721"
    att-parent                          "default"
    auto-create                         1
    limits                              0,2
    angles                              -1.57,0
    tooltip-token                       "valve_972"
    mousemode                           "exact"
  }
  sw_tpp
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_43"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5708
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "sw_tpp"
  }
  sw_pesok
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_41"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5708
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "sw_pesok"
  }
  sw_tpz
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_42"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5708
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "sw_tpz"
  }
  sw_compressor2
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att-parent                          "default"
    att                                 "a.pkt_cab1_39"
    auto-create                         1
    limits                              -1,1
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         1,1,1
    tooltip-token                       "sw_compressor2"
  }
  sw_ventilator
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_52"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5708
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "sw_ventilator"
  }
  sw_raz2
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_40"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5708
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "sw_raz2"
  }
  projector
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_36"
    auto-create                         1
    limits                              -1,1
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         1,1,1
    tooltip-token                       "projector"
  }
  lotoplenie
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_53"
    auto-create                         1
    limits                              -1,1
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         1,1,1
    tooltip-token                       "lotoplenie"
  }
  sw_svet_meters
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att-parent                          "default"
    att                                 "a.pkt_cab1_50"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5708
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "sw_svet_meters"
  }
  sw_svet
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att-parent                          "default"
    att                                 "a.pkt_cab1_38"
    auto-create                         1
    limits                              -1,1
    angles                              0.785,-0.785
    notches                             0,0.5,1
    notchheight                         1,1,1
    tooltip-token                       "sw_svet"
  }
  sw_bfr
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_44"
    auto-create                         1
    limits                              -1,1
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         1,1,1
    tooltip-token                       "sw_bfr"
  }
  sw_bfl
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_45"
    auto-create                         1
    limits                              -1,1
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         1,1,1
    tooltip-token                       "sw_bfl"
  }
  sw_kontrol1
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_54"
    auto-create                         1
    limits                              -1,1
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         1,1,1
    tooltip-token                       "sw_kontrol1"
  }
  sw_kontrol2
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.pkt_cab1_49"
    auto-create                         1
    limits                              -1,1
    angles                              -0.785,0.785
    notches                             0,0.5,1
    notchheight                         1,1,1
    tooltip-token                       "sw_kontrol2"
  }
  ind_blinker1
  {
    kind                                "needle"
    mesh                                "bv_limb.im"
    att                                 "a.limb_cab1_17"
    auto-create                         1
    limits                              0,2
    angles                              -1.5,0.07
    att-parent                          "default"
    value                               1
  }
  kn_gvstart
  {
    kind                                "button"
    mesh                                "kn_bvstart.im"
    att                                 "a.btn_cab1_37"
    att-parent                          "default"
    auto-create                         1
    limits                              0,1
    angles                              0,-0.01
    mousespeed                          -2
  }
  kn_gvstop
  {
    kind                                "button"
    mesh                                "kn_bvstop.im"
    att                                 "a.btn_bvstop"
    att-parent                          "default"
    auto-create                         1
    limits                              0,1
    angles                              0,-0.01
    mousespeed                          -2
  }
  kn_kzhsbros
  {
    kind                                "button"
    mesh                                "sbros_kzh.im"
    att                                 "a.btn_kzh"
    att-parent                          "default"
    auto-create                         1
    limits                              0,1
    angles                              0.002,-0.004
    mousespeed                          -2
  }
  horn
  {
    kind                                "button"
    mesh                                "horn.im"
    att                                 "a.valve_svistok_cab1"
    att-parent                          "default"
    auto-create                         1
    limits                              0,1
    angles                              0.008,0
    mousespeed                          -2
    tooltip-token                       "horn"
  }
  tifon
  {
    kind                                "button"
    mesh                                "horn.im"
    att                                 "a.tifon"
    att-parent                          "default"
    auto-create                         1
    limits                              0,1
    angles                              0.008,0
    mousespeed                          -2
    tooltip-token                       "tifon"
  }
  op
  {
    kind                                "lever"
    mesh                                "OP_lever.im"
    att                                 "a.op_cab1"
    auto-create                         1
    limits                              0,5
    notches                             0,0.2,0.4,0.6,0.8,1
    notchheight                         1,1,1,1,1,1
    angles                              0,2.5
    mousespeed                          -0.5
    att-parent                          "default"
    tooltip-token                       "op"
  }
  left_wiper_tumbler
  {
    kind                                "lever"
    mesh                                "wiper_lever.im"
    att                                 "a.kleft_dvor"
    auto-create                         1
    limits                              0,0.5
    angles                              -0.7,0.7
    att-parent                          "default"
  }
  right_wiper_tumbler
  {
    kind                                "lever"
    mesh                                "wiper_lever.im"
    att                                 "a.kright_dvor"
    auto-create                         1
    limits                              0,0.5
    angles                              -0.7,0.7
    att-parent                          "default"
  }
  okno
  {
    mesh                                "window.im"
    anim                                "window.kin"
    kind                                "animated-lever"
    auto-create                         1
    att                                 "a.window_r"
    limits                              0,1
    mousespeed                          -0.3
    test-collisions                     0
  }
  okno_col
  {
    mesh                                "okno_col.im"
    auto-create                         1
    kind                                "collision-proxy"
    att-parent                          "default"
    att                                 "a.okno"
    collision-parent                    "okno"
    opacity                             0
  }
  okno2
  {
    mesh                                "window.im"
    anim                                "window.kin"
    kind                                "animated-lever"
    auto-create                         1
    att                                 "a.window_left"
    limits                              0,1
    mousespeed                          -0.3
    test-collisions                     0
  }
  okno_col2
  {
    mesh                                "okno_col.im"
    auto-create                         1
    kind                                "collision-proxy"
    att-parent                          "default"
    att                                 "a.okno2"
    collision-parent                    "okno2"
    opacity                             0
  }
  wiper_l
  {
    mesh                                "lwiper.im"
    anim                                "lwiper.kin"
    att                                 "a.wipers"
    att-parent                          "default"
    auto-create                         1
  }
  wiper_r
  {
    mesh                                "rwiper.im"
    anim                                "rwiper.kin"
    att                                 "a.wipers"
    att-parent                          "default"
    auto-create                         1
  }
  rwr
  {
    mesh                                "rwr.im"
    att                                 "a.wipers"
    auto-create                         0
    test-collisions                     0
    att-parent                          "default"
  }
  rwrw
  {
    mesh                                "rwrw.im"
    att                                 "a.wipers"
    auto-create                         0
    test-collisions                     0
    att-parent                          "default"
  }
  rwfr
  {
    mesh                                "rwf.im"
    att                                 "a.rwf"
    auto-create                         0
    test-collisions                     0
    att-parent                          "okno"
  }
  rwfl
  {
    mesh                                "rwf.im"
    att                                 "a.rwf"
    auto-create                         0
    test-collisions                     0
    att-parent                          "okno2"
  }
  rwl
  {
    mesh                                "rwl.im"
    att                                 "a.wipers"
    auto-create                         0
    test-collisions                     0
    att-parent                          "default"
  }
  rwlw
  {
    mesh                                "rwlw.im"
    att                                 "a.wipers"
    auto-create                         0
    test-collisions                     0
    att-parent                          "default"
  }
}
string-table
{
  hp                                    "Ходовая позиция"
  rp                                    "Реостатная позиция |"
  nakal_pss                             "Накал ламп ПСС"
  epk                                   "Ключ ЭПК"
  sw_gv                                 "ВУ"
  sw_ab                                 "АКБ"
  sw_compressor                         "Компрессор I"
  sw_compressor2                        "Компрессор II"
  sw_raz1                               "Разъединитель I"
  sw_raz2                               "Разъединитель II"
  ws_vodootvod                          "Водоотвод ГР"
  sw_reostat                            "ЭПТ"
  sw_tpp                                "Пантограф передний"
  sw_pesok                              "Песочница"
  sw_tpz                                "Пантограф задний"
  sw_ventilator                         "Вентиляторы"
  projector                             "Прожектор"
  lotoplenie                            "Отопление"
  sw_svet_meters                        "Освещение приборов"
  sw_svet                               "Освещение кабины"
  sw_bfr                                "Буферный фонарь правый"
  sw_bfl                                "Буферный фонарь левый"
  sw_kontrol1                           "Стеклообогрев правый"
  sw_kontrol2                           "Стеклообогрев левый"
  kn_kzhsbros                           "сброс КЖ"
  op                                    "Ослабление поля"
  left_wiperlever                       "Левый дворник"
  right_wiperlever                      "Правый дворник"
  okno_col                              "Форточка"
  reverser_lever                        "реверс"
  shturval                              "контроллер"
  kran_254                              "Кран 254"
  kran_395                              "Кран 395"
  valve_966                             "Комбинированный кран"
  valve_972                             "Разобщительный кран"
  sw_radio                              "Рация"
  handbrake                             "Стояночный тормоз"
  sw_alsn2                              "АЛСН"
  tifon                                 "Тифон"
  horn                                  "Свисток"
}
script-include-table
{
  0                                     <kuid:400089:234>
}
cameralist
{
  camera0                               -0.554,-0.342,1.283,6.282,-0.17
  camera1                               -1.835,-0.34,1.283,9.324,-0.1
  camera2                               -0.095,-0.21,1.283,3.762,-0.364
  camera3                               0.675,-0.771,1.403,-0.01,-0.196
  camera4                               -0.62,-0.485,1.243,-1.715,-0.217
  camera5                               -0.036,-0.643,1.196,0,-0.494
}
thumbnails
{
  0
  {
    image                               "screen.jpg"
    width                               240
    height                              180
  }
}
soundscript
{
  skor
  {
    repeat-delay                        0,0
    distance                            2,3
    attachment                          "a.chasy"
    trigger                             "skor"
    nostartdelay                        0
    priority                            7
    volume                              0.5
    sound
    {
      0                                 "sound/skorostemer.wav"
    }
  }
  skor1
  {
    repeat-delay                        0,0
    distance                            2,3
    attachment                          "a.chasy"
    trigger                             "skor1"
    nostartdelay                        0
    priority                            7
    volume                              0.5
    sound
    {
      0                                 "sound/sl2m.wav"
    }
  }
  alarm
  {
    repeat-delay                        0,0
    distance                            2,3
    attachment                          "a.epk_cab1"
    trigger                             "alarm"
    nostartdelay                        1
    priority                            1
    sound
    {
      0                                 "sound/epk.wav"
    }
  }
  395_ext
  {
    repeat-delay                        100,100
    distance                            2,10
    attachment                          "a.epk_cab1"
    trigger                             "395_ext"
    nostartdelay                        1
    priority                            8
    sound
    {
      0                                 "sound/395_ekstr.wav"
    }
  }
  pk
  {
    repeat-delay                        10,10
    distance                            2,3
    attachment                          "a.pomoha_cab1"
    trigger                             "k"
    nostartdelay                        0
    priority                            1
    volume                              0.7
    sound
    {
      0                                 "sound/k.wav"
    }
  }
  pe
  {
    repeat-delay                        10,10
    distance                            2,3
    attachment                          "a.pomoha_cab1"
    trigger                             "e"
    nostartdelay                        0
    priority                            1
    volume                              0.7
    sound
    {
      0                                 "sound/e.wav"
    }
  }
  pz
  {
    repeat-delay                        10,10
    distance                            2,3
    attachment                          "a.pomoha_cab1"
    trigger                             "z"
    nostartdelay                        0
    priority                            1
    volume                              0.7
    sound
    {
      0                                 "sound/z.wav"
      1                                 "sound/z1.wav"
      2                                 "sound/z2.wav"
      3                                 "sound/z2.wav"
    }
  }
  pee
  {
    repeat-delay                        10,10
    distance                            2,3
    attachment                          "a.pomoha_cab1"
    trigger                             "ee"
    nostartdelay                        0
    priority                            1
    volume                              0.7
    sound
    {
      0                                 "sound/ee.wav"
    }
  }
  pef
  {
    repeat-delay                        10,10
    distance                            2,3
    attachment                          "a.pomoha_cab1"
    trigger                             "ef"
    nostartdelay                        0
    priority                            1
    volume                              0.7
    sound
    {
      0                                 "sound/ef.wav"
    }
  }
  sand
  {
    repeat-delay                        10,10
    distance                            2,3
    attachment                          "a.pomoha_cab1"
    trigger                             "sand"
    nostartdelay                        1
    priority                            3
    volume                              0.7
    sound
    {
      0                                 "sound/sand.wav"
    }
  }
  r_dvor
  {
    repeat-delay                        0.001
    distance                            2,4
    attachment                          "a.kright_dvor"
    trigger                             "r_dvor"
    nostartdelay                        1
    priority                            4
    volume                              1
    sound
    {
      0                                 "sound/11.wav"
    }
  }
  l_dvor
  {
    repeat-delay                        0.01
    distance                            2,4
    attachment                          "a.kleft_dvor"
    trigger                             "l_dvor"
    nostartdelay                        1
    priority                            4
    volume                              1
    sound
    {
      0                                 "sound/10.wav"
    }
  }
}
kuid-table
{
  sound-library                         <kuid:400089:229>
  textures                              <kuid2:400089:211:3>
  0                                     <kuid:567242:374>
  1                                     <kuid:400089:234>
}
Файлы:
butil-butil.texture.txt	45 B
395.im	6.7 kB
pss.texture.txt	26 B
cab3.texture.txt	27 B
butil.kin	1.9 kB
ab_lever.im	4.1 kB
blokirovka.im	4.4 kB
red_button.im	2.0 kB
red.im	4.6 kB
rwf.im	2.0 kB
red_yellow.im	4.6 kB
rb_btn.im	9.0 kB
rwiper.im	8.3 kB
rwrw.im	3.5 kB
rwr.im	3.5 kB
rwl.im	3.5 kB
sbros_kzh.im	1.1 kB
rwiper.kin	940 B
rwlw.im	3.5 kB
butil.im	17.4 kB
sl2mlight.im	1.4 kB
slim_needle.im	464 B
screen.jpg	60.7 kB
shturval.im	58.6 kB
cab7.texture.txt	27 B
sound
sound / 10.wav	76.4 kB
sound / controller.wav	11.0 kB
sound / ee.wav	66.1 kB
sound / cabin.txt	1.2 kB
sound / avtomat.wav	16.7 kB
sound / e.wav	141.8 kB
sound / 11.wav	69.9 kB
sound / 395_ekstr.wav	245.0 kB
sound / op.wav	21.8 kB
sound / rb.wav	16.9 kB
sound / reverser.wav	11.3 kB
sound / sand.wav	36.9 kB
sound / ef.wav	146.0 kB
sound / shtorka.wav	54.8 kB
sound / skorostemer.wav	290.0 kB
sound / stuk395.wav	6.8 kB
sound / switch.wav	4.0 kB
sound / switch_vukl.wav	32.1 kB
sound / sl2m.wav	327.1 kB
sound / tumbler.wav	14.2 kB
sound / window.wav	75.2 kB
sound / z.wav	131.6 kB
sound / z2.wav	142.2 kB
sound / z1.wav	127.6 kB
sound / nasos.wav	67.8 kB
sound / lokobr.wav	15.8 kB
sound / k.wav	120.6 kB
sound / epk_vkl.wav	12.7 kB
sound / iskra.wav	24.4 kB
sound / epk.wav	20.9 kB
speedneedle.im	3.4 kB
steklo.im	9.0 kB
strelka.im	2.3 kB
tabl_pult.im	23.7 kB
tumbler.im	6.5 kB
tumbler_raciy.im	12.0 kB
vu_lever.im	4.5 kB
white.im	4.6 kB
valve.im	8.3 kB
window.im	11.1 kB
window.kin	928 B
window.texture.txt	29 B
cab8.jpg	1.2 MB
windows-windows.texture.txt	49 B
wiper_lever.im	1.8 kB
yellow.im	4.0 kB
glrain1-glrain1.texture.txt	49 B
butil.tga	2.0 MB
butil_2.texture.txt	30 B
lamp_s2.im	2.9 kB
cab0.jpg	904.0 kB
lamp_t2.im	2.9 kB
cab0.texture.txt	27 B
okno_col.im	1.2 kB
box.im	7.2 kB
chs2.jpg	750.5 kB
attach_mesh.im	568 B
pribory_light.im	10.4 kB
cab2.jpg	1.8 MB
lwiper.kin	948 B
needle_black.im	1.5 kB
lamp_reostat2.im	2.9 kB
op_lever.im	7.6 kB
pss.jpg	37.4 kB
254.im	10.4 kB
pribory_nolight.im	10.5 kB
lwiper.im	8.3 kB
pegas.im	4.0 kB
lamp_mk2.im	2.9 kB
lamp_mv2.im	2.9 kB
kn_bvstop.im	5.5 kB
lamp_propusk.im	3.0 kB
cab7.jpg	2.4 MB
lamp_p2.im	2.9 kB
kv_needle.im	614 B
kn_bvstart.im	2.0 kB
lamp_pss.im	6.1 kB
lamp_svet.im	6.0 kB
ka_needle.im	614 B
lamp_gu.im	1.2 kB
hour_needle.im	664 B
horn.im	9.0 kB
glrain2-glrain2.texture.txt	49 B
green.im	4.0 kB
chs2.texture.txt	27 B
clock.im	1.7 kB
cab4.texture.txt	27 B
handbrake.im	53.8 kB
chs2_cabina.gs	67 B
cab9.texture.txt	27 B
cab8.texture.txt	27 B
epk_key.im	5.5 kB
cab6.texture.txt	27 B
cab6.jpg	340.6 kB
chs2cab.im	1.5 MB
cab5.texture.txt	27 B
cab2.texture.txt	27 B
cab9.jpg	1.3 MB
cab12.texture.txt	28 B
cab11.texture.txt	28 B
cab10.texture.txt	28 B
cab11.jpg	660.7 kB
cab5.jpg	744.2 kB
window.jpg	2.7 MB
bv_limb.im	8.2 kB
cab1.texture.txt	27 B
butil_2.tga	192.0 kB
cab12.jpg	320.2 kB
cab1.jpg	1.7 MB
cab3.jpg	2.1 MB
cab10.jpg	1.4 MB
cab4.jpg	2.2 MB
glrain2.tga	2.0 MB
glrain1.tga	2.0 MB
windows.tga	1.0 MB
Общий объём файлов:	31.9 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid:400089:233>	interior	UZ_CHS2 interior	3.7	25.10.2021 20:41:04	26.1 MB
Зависимости:
kuid	author	kind	name	build	date	size
<kuid2:400089:211:3>	#400089	texture-group	C_textures	3.7	18.10.2021 20:48:57	17.1 MB
<kuid:400089:229>	#400089	library	UZ_CHS7-SoundLibrary	4.6	9.01.2021 18:24:23	27.6 MB
<kuid2:400089:234:1>	#400089	library	Библиотека скриптов ЧС2	3.7	25.10.2021 20:47:55	22.3 kB
<kuid2:567242:374:1>	#567242	mesh	UA_pom driver	4.5	16.05.2023 14:36:26	832.6 kB
Всего связей: 4, неизвестных связей: 0
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid:400089:232>	#400089	traincar	УЗ ЧС2-020	3.7	18.10.2021 20:48:02	13.4 MB