<kuid:387111:101213> HS18a Un-painted Interior

Тип: Кабина
Опубликовано: 23.07.2020 20:35:52
Скачиваний: 15
Размер: 2.4 MB

Скачать

config.txt:

kuid                                    <kuid:387111:101213>
username                                "HS18a Un-painted Interior"
kind                                    "interior"
script                                  "GenCabin"
class                                   "GenCabin"
cameradefault                           2
category-era                            "2010s"
category-region                         "CA;US"
trainz-build                            2.9
license                                 "This item is supplied free of charge for personnel use by registered users of Trainz and it is OK to re-skin this item. But, it or its contents may not be offered for sale or supplied as any part of a Payware package and/or be provided for downloading on any site other than Auran / N3V unless this is expressly permitted in writing by the mesh author Don49plm / and  skin author (-your name here-)."
category-class                          "ZI"
author                                  "mess: Don49plm / skin: (-your name here-)"
cameralist
{
  camera0                               1.22,-4.7,-0.5,0,0
  camera1                               1.203,0.1,0.408,0.266,0
  camera2                               -1.203,0.1,0.408,0.465,0
  camera3                               -1.203,0.3,0.408,3.135,0
  camera4                               1.203,0.609,0.408,3.135,0
}
mesh-table
{
  default
  {
    mesh                                "main.im"
    auto-create                         1
  }
  switch0
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch0"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    onlight                             "switchlight0"
    auto-create                         1
    att-parent                          "default"
  }
  switchlight0
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch0"
    auto-create                         0
  }
  switch1
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch1"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    onlight                             "switchlight1"
    auto-create                         1
    att-parent                          "default"
  }
  switchlight1
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch1"
    auto-create                         0
  }
  switch2
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch2"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    onlight                             "switchlight2"
    auto-create                         1
    att-parent                          "default"
  }
  switchlight2
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch2"
    auto-create                         0
  }
  switch3
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch3"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    onlight                             "switchlight3"
    auto-create                         1
    att-parent                          "default"
  }
  switchlight3
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch3"
    auto-create                         0
  }
  switch4
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch4"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    onlight                             "switchlight4"
    auto-create                         1
    att-parent                          "default"
  }
  switchlight4
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch4"
    auto-create                         0
  }
  switch5
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch5"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    onlight                             "switchlight5"
    auto-create                         1
    att-parent                          "default"
  }
  switchlight5
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch5"
    auto-create                         0
  }
  switch6
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch6"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    onlight                             "switchlight6"
    auto-create                         1
    att-parent                          "default"
  }
  switchlight6
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch6"
    auto-create                         0
  }
  switch7
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch7"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    onlight                             "switchlight7"
    auto-create                         1
    att-parent                          "default"
  }
  switchlight7
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch7"
    auto-create                         0
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser_lever.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.55,-0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    auto-create                         1
    att-parent                          "default"
  }
  independantbrake_lever
  {
    kind                                "lever"
    mesh                                "ind_brake_lever.im"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              0,-2.1
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,1
    radius                              0.15
    auto-create                         1
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    mesh                                "train_brake_lever.im"
    att                                 "a.train_brake_lever"
    limits                              0,4
    angles                              0,-2.4
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              0.15
    auto-create                         1
    att-parent                          "default"
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle_lever.im"
    att                                 "a.thottle_lever"
    limits                              0,8
    angles                              1.2,0
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    auto-create                         1
    att-parent                          "default"
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    mesh                                "dynamic_lever.im"
    att                                 "a.dynamic_brake"
    limits                              0,2
    angles                              0,-1.2
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.35
    auto-create                         1
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.light_switch"
    mesh                                "dial.im"
    limits                              0,1
    angles                              0,4.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    auto-create                         1
    att-parent                          "default"
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "ampmeter_needle.im"
    att                                 "a.ammeter"
    limits                              0,1500
    angles                              0,1.9
    auto-create                         1
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "whitepress_needle.im"
    att                                 "a.equaliser_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "redpress_needle.im"
    att                                 "a.main_res_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "redpress_needle.im"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "whitepress_needle.im"
    att                                 "a.brake_pipe_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "whitepress_needle.im"
    att                                 "a.speedo"
    limits                              0,48
    auto-create                         1
    att-parent                          "default"
  }
  horn
  {
    kind                                "lever"
    mesh                                "horn.im"
    att                                 "a.horn"
    limits                              0,1
    angles                              0,-0.6
    notches                             0,1
    notchheight                         3,3
    radius                              0.16
    mousespeed                          -2
    auto-create                         1
    att-parent                          "default"
  }
  wheelslip_light
  {
    kind                                "light"
    mesh                                "wheelslip.im"
    auto-create                         0
  }
  cab01
  {
    mesh                                "cab/cew_hs18a_cab.im"
    auto-create                         1
    att                                 "a.body0"
    att-parent                          "att_mesh"
  }
  extinguisher
  {
    mesh                                "extinguisher.im"
    auto-create                         1
  }
  heater
  {
    mesh                                "heater.im"
    auto-create                         1
  }
  chair_base
  {
    mesh                                "chair_base.im"
    auto-create                         1
  }
  swivel_chair
  {
    kind                                "lever"
    mesh                                "chair.im"
    att                                 "a.chair1"
    limits                              0,8
    angles                              6.8,-6.8
    mousespeed                          0.2
    auto-create                         1
    att-parent                          "default"
  }
  dial0
  {
    kind                                "lever"
    att                                 "a.dial0"
    mesh                                "dial.im"
    limits                              0,1
    angles                              0,3.8
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    att-parent                          "default"
  }
  dial1
  {
    kind                                "lever"
    att                                 "a.dial1"
    mesh                                "dial.im"
    limits                              0,1
    angles                              0,3.8
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    att-parent                          "default"
  }
  body
  {
    mesh                                "body/cew_hs18a_body.im"
    auto-create                         1
    att                                 "a.body0"
    att-parent                          "att_mesh"
  }
  att_mesh
  {
    mesh                                "attach_mesh.im"
    auto-create                         1
  }
}
thumbnails
{
  0
  {
    image                               "CRAPhh_inter.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
}

Файлы:

air_brake.im	532 B
ampmeter_needle.im	528 B
attach_mesh.im	556 B
black.texture.txt	28 B
black.tga	1.8 kB
black_handle.texture.txt	35 B
black_handle.tga	12.0 kB
body
body / cew_hs18a_body.im	595.1 kB
body / rtm_0001.texture.txt	31 B
body / rtm_0001.tga	13.0 kB
body / rtm_0002.texture.txt	31 B
body / rtm_0002.tga	13.0 kB
body / rtm_0003.texture.txt	31 B
body / rtm_0003.tga	13.0 kB
body / rtm_0004.texture.txt	31 B
body / rtm_0004.tga	786 B
body / rtm_0005.texture.txt	31 B
body / rtm_0005.tga	192.0 kB
body / rtm_0006-rtm_0006.texture.txt	51 B
body / rtm_0006.tga	32.0 kB
body / rtm_0007.texture.txt	31 B
body / rtm_0007.tga	6.0 MB
body / rtm_0008.texture.txt	31 B
body / rtm_0008.tga	96.0 kB
body / rtm_0009.texture.txt	31 B
body / rtm_0009.tga	24.0 kB
body / rtm_0010.texture.txt	31 B
body / rtm_0010.tga	4.0 kB
brake01.texture.txt	30 B
brake01.tga	96.0 kB
brake02.texture.txt	30 B
brake02.tga	192.0 kB
cab
cab / cew_hs18a_cab.im	340.4 kB
cab / rtm_0001.texture.txt	31 B
cab / rtm_0001.tga	13.0 kB
cab / rtm_0002.texture.txt	31 B
cab / rtm_0002.tga	4.0 kB
cab / rtm_0003.texture.txt	31 B
cab / rtm_0003.tga	4.0 kB
cab / rtm_0004.texture.txt	31 B
cab / rtm_0004.tga	385.0 kB
cab / rtm_0005.texture.txt	31 B
cab / rtm_0005.tga	13.0 kB
cab / rtm_0006.texture.txt	31 B
cab / rtm_0006.tga	192.0 kB
cab / rtm_0007.texture.txt	31 B
cab / rtm_0007.tga	4.0 kB
cab / rtm_0008.texture.txt	31 B
cab / rtm_0008.tga	192.0 kB
cab / rtm_0009.texture.txt	31 B
cab / rtm_0009.tga	193.0 kB
cab / rtm_0010.texture.txt	31 B
cab / rtm_0010.tga	193.0 kB
cab01.im	12.0 kB
chair.im	10.2 kB
chair_base.im	12.5 kB
chair_base.texture.txt	33 B
chair_base.tga	24.0 kB
chair_basexx.tga	25.0 kB
clock_hour_needle.im	1.0 kB
clock_minute_needle.im	1.0 kB
craphh_inter.jpg	64.3 kB
dash_back.texture.txt	32 B
dash_back.tga	193.0 kB
dash_bits.texture.txt	32 B
dash_bits.tga	3.0 MB
dash_dials.texture.txt	33 B
dash_dials.tga	193.0 kB
dial.im	524 B
diamond.texture.txt	30 B
diamond.tga	3.0 kB
dynamic_lever.im	3.4 kB
extinguisher.im	2.1 kB
exting_body.texture.txt	34 B
exting_body.tga	6.0 kB
exting_handle-exting_handle_op.texture.txt	122 B
exting_handle-exting_handle_op.tga	32.0 kB
fault0.im	528 B
fault1.im	528 B
gencabin.gs	5.2 kB
heater.im	1.0 kB
heater.texture.txt	29 B
heater.tga	97.0 kB
horn.im	3.2 kB
ind_brake_lever.im	3.6 kB
levers.texture.txt	29 B
levers.tga	24.0 kB
line_voltage.im	1.1 kB
line_voltage.texture.txt	35 B
line_voltage.tga	97.0 kB
main.im	49.5 kB
needle_red.texture.txt	33 B
needle_red.tga	1.8 kB
needle_white.texture.txt	35 B
needle_white.tga	1.8 kB
phone.texture.txt	28 B
phone.tga	24.0 kB
phonecord-phonecord_op.texture.txt	106 B
phonecord-phonecord_op.tga	32.0 kB
recess.texture.txt	29 B
recess.tga	12.0 kB
redpress_needle.im	528 B
reverser_lever.im	2.8 kB
seat.texture.txt	27 B
seat.tga	48.0 kB
sound
sound / air_horn_3.wav	177.1 kB
sound / cabin.txt	348 B
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / lever_5.wav	18.3 kB
sound / notch_1.wav	2.8 kB
sound / reverser.wav	10.4 kB
sound / switch_6.wav	11.6 kB
sound / throttle.wav	4.0 kB
speedo_needle.im	1.2 kB
switch.im	1.3 kB
switch.texture.txt	29 B
switch.tga	1.5 kB
switchdial-switchdial_op.texture.txt	110 B
switchdial-switchdial_op.tga	16.0 kB
switchlight-switchlight_op.texture.txt	114 B
switchlight-switchlight_op.tga	1.0 kB
switchlight.im	540 B
throttle_lever.im	3.4 kB
train_brake_lever.im	6.4 kB
wheelslip-wheelslip_op.texture.txt	106 B
wheelslip-wheelslip_op.tga	16.0 kB
wheelslip.im	532 B
whitepress_needle.im	528 B
window01.im	3.1 kB
windows.texture.txt	30 B
windows.tga	24.0 kB
Общий объём файлов:	13.1 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:387111:101213>	interior	HS18a Un-painted Interior	2.9	23.07.2020 20:35:52	2.4 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:387111:100792:1>	#387111	traincar	HS18a Un-Painted	2.9	2.08.2020 9:41:49	1.9 MB