A slave crossing that mimics the state of an associated instance of <kuid:368725:20526> 'NSWGR railway crossing control, bi-directional tracks, multi-track fixed road length, no fixed tracks'.
The purpose of the asset is to indefinitely extend the distance away from the tracks at which Carz will stop and wait when the associated railway crossing control is in the 'CLOSING' and 'CLOSED' states.
Insert a slave into the road spline at the point you want Carz to stop.
This is an optional element in a kit allowing the assembly of crossings tailored to their locations. The kit comprises the following KUID 368725 assets:
20384 - NSWGR railway crossing boom gate, lefthand
20385 - NSWGR railway crossing boom gate, righthand
20519 - NSWGR railway crossing road gate pair, manual
20523 - NSWGR railway crossing road gate, manual, cw
20524 - NSWGR railway crossing road gate, manual, acw
20386 - NSWGR railway crossing pedestrian gate, remotely operated, lefthand
20387 - NSWGR railway crossing pedestrian gate, remotely operated, righthand
20522 - NSWGR railway crossing pedestrian gate, user operated
20388 - NSWGR railway crossing warning light, post mount, red flash
20526 - NSWGR railway crossing control, bi-directional tracks, multi-track fixed road length, no fixed tracks
20391 - NSWGR railway crossing pedestrian boards, single track
20392 - NSWGR railway crossing pedestrian boards, double track, 12ft spacing
60013 - Operate railway crossing (driver command)
Also important for the kit's operation is KUID:76656:70010 'Directional Trigger'.
Some compatible road assets are:
30154 - Tertiary 2L,8m rural road, unsealed, grey dust on gravel, 40mph (65km/hr)
30171 - Tertiary 2L,8m rural road, unsealed, grey dust on gravel, no traffic
30155 - Tertiary 2L,8m rural road, unsealed, brown dust on gravel, 40mph (65km/hr)
30172 - Tertiary 2L,8m rural road, unsealed, brown dust on gravel, no traffic
For correct communication between this slave asset and its associated crossing control asset, a naming convention must be followed.
Localised names given to controls have 3 elements separated by underscores and to slaves, 4 elements separated by underscores.
The first name element is common to both. It is the location code for the crossing. This can be any alphanumeric.
The second name element is 'crossing control' and 'crossing slave', respectively.
There may be more than one crossing at a location, so the third name element common to both is an index commencing at '0' for the first crossing, and so on.
There may be 1 or 2 crossing slaves associated with a crossing control. One slave is used when only one side of the crossing requires extension, and two slaves are used when both sides need extension. The fourth name element of slaves is '0' for the first slave and '1' for the second.
Here is a naming example. If the crossing control has a localised name of 'HR_crossing control_0' then the first slave must be given the name 'HR_crossing slave_0_0'.
Тип: Переезд