<kuid2:368725:90057:5> NSWGR throw-over lever to switch yard points, default right, for avatar operation

Тип: Стрелка
Опубликовано: 25.09.2025 23:49:22
Скачиваний: 5
Размер: 1.3 MB

Скачать

A throw-over lever that is weighted to hold the active switch blade against the stock rail in the selected switch direction.
When used with junctions formed with tracks from the series sourced from <kuid2:368725:49000:7> 'Protrack NSWGR Mesh Library', this asset mates with the switching mechanism when it is mounted to the left side of a junction that is switched right by default.
The lever is normally operated by a safe-working officer (SWO) avatar (see the 'SWO Controller Rule' <kuid:368725:60021>). When the relevant avatar is active in the yard in which this control is placed, AI drivers cannot control the junction. When the avatar leaves the trigger area of this junction it will remain in switch direction to which it has been set.
A naming convention is required so that each junction in a yard is linked to the yard's avatar. If the avatar location code is <location code> then the ground point lever must be named <location code>_TPL_<sequence>, where <sequence> is a lever sequence alphanumeric. For example, if the avatar location code is 'CNJ' then a valid point lever code is 'CNJ_TPL_04'.

config.txt:

kuid                                    <kuid2:368725:90057:5>
kind                                    "mojunction"
trainz-build                            4.2
username                                "NSWGR throw-over lever to switch yard points, default right, for avatar operation"
description                             "A throw-over lever that is weighted to hold the active switch blade against the stock rail in the selected switch direction.
When used with junctions formed with tracks from the series sourced from <kuid2:368725:49000:7> 'Protrack NSWGR Mesh Library', this asset mates with the switching mechanism when it is mounted to the left side of a junction that is switched right by default.
The lever is normally operated by a safe-working officer (SWO) avatar (see the 'SWO Controller Rule' <kuid:368725:60021>). When the relevant avatar is active in the yard in which this control is placed, AI drivers cannot control the junction. When the avatar leaves the trigger area of this junction it will remain in switch direction to which it has been set.
A naming convention is required so that each junction in a yard is linked to the yard's avatar. If the avatar location code is <location code> then the ground point lever must be named <location code>_TPL_<sequence>, where <sequence> is a lever sequence alphanumeric. For example, if the avatar location code is 'CNJ' then a valid point lever code is 'CNJ_TPL_04'."
category-era                            "1870s;1980s"
category-region                         "AU"
category-class                          "WX"
trackside                               -2
script                                  "junctionlever_yard_v5"
class                                   "pointlever"
mesh-table
{
  mode0
  {
    mesh                                "lever1.lm"
    auto-create                         0
  }
  mode1
  {
    mesh                                "lever2.lm"
    auto-create                         1
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
string-table
{
  prompt_nonamecheck                    "Bypass checks for a valid AI-control username?"
  result_ncboolean0                     "NO"
  result_ncboolean1                     "YES"
  dialog-caption-triggers               "Equipment Location Trigger [ELT]:"
  prompt-getmyelt                       "Click to se;ect Equipment Location Trigger [ELT]:"
  close                                 "Close"
  tpl_n                                 "Normal"
  tpl_on                                "Off Normal"
}
obsolete-table
{
}
kuid-table
{
  0                                     <kuid:-25:893>
}

Файлы:

images
images / close.jpg	844 B
images / tpl_on.jpg	1.3 kB
images / tpl_n.jpg	1.3 kB
lever1.lm.txt	231 B
lever2.lm.txt	231 B
throwover lever-throwover lever.texture.txt	65 B
junctionlever_yard_v5.gs	24.1 kB
lever1_2.im	30.8 kB
lever2_2.im	31.0 kB
throwover lever_normal-throwover lever_normal.texture.txt	104 B
lever1_1.im	54.6 kB
lever2_1.im	55.0 kB
thumbnail.jpg	33.1 kB
lever1_0.im	95.6 kB
lever2_0.im	95.6 kB
throwover lever.tga	1.0 MB
throwover lever_normal.tga	1.0 MB
Общий объём файлов:	2.4 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:368725:90057:5>	mojunction	NSWGR throw-over lever to switch yard points, default right, for avatar operation	4.2	25.09.2025 23:49:22	1.3 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-25:893>	#-25	track	Путь_Невидимый	0	19.12.2022 21:53:41	10.1 kB
Всего связей: 1, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:368725:100031:1>	#368725	map	Liverpool Range - Wingen-Ardglen - ROUTE	5	26.09.2025 3:46:46	66.7 MB
<kuid:368725:100038>	#368725	map	Liverpool Range - Ardglen quarry route	5	25.09.2025 23:47:09	1.0 MB
<kuid2:368725:100038:1>	#368725	map	Liverpool Range - Ardglen quarry route	5.5	25.09.2025 23:53:18	1.0 MB
<kuid2:368725:100042:2>	#368725	map	Liverpool Range - Wingen-Braefield - ROUTE	5.6	25.09.2025 19:44:30	107.6 MB
<kuid:630406:100899>	#630406	map	NSW Wallaby Flats	5.5	9.10.2025 7:28:26	12.5 MB