<kuid2:368725:65084:4> NSWGR LQ semaphore mechanical starting signal, op detect, elec light, on 22ft wooden post

Тип: Сигнал
Опубликовано: 26.08.2024 18:31:27
Скачиваний: 7
Размер: 3.7 MB

Скачать

A lower-quadrant, mechanically-operated, semaphore starting signal with operation detection, mounted on a 22ft wooden post. Original oil lamp has been replaced by an electric one. The semaphore can take 2 positions over the lowerer quadrant: horizontal (STOP), and -50 degrees (PROCEED).
The starting signal was the last signal out of a station yard, beyond which a train would enter the safeworking section between this starting signal's yard and the next.
For correct operation of the starting signal, there should be a distant signal on the approach, then a home signal at the entry, to the next station yard.
In game, to obtain a more realisitic speed profile for trains travelling between station yards, an invisible signal can be added to the track at the driver sighting distance from the distant signal.
The distance (metres) between this signal and (a) the outer home signal associated with this signal, (b) an approaching train beyond which the signal is held at STOP, can be set by the user in the Properties editor. The default home-signal distance is 300m and default approach distance is 1300m.

config.txt:

kuid                                    <kuid2:368725:65084:4>
username                                "NSWGR LQ semaphore mechanical starting signal, op detect, elec light, on 22ft wooden post"
description                             "A lower-quadrant, mechanically-operated, semaphore starting signal with operation detection, mounted on a 22ft wooden post. Original oil lamp has been replaced by an electric one. The semaphore can take 2 positions over the lowerer quadrant: horizontal (STOP), and -50 degrees (PROCEED).
The starting signal was the last signal out of a station yard, beyond which a train would enter the safeworking section between this starting signal's yard and the next.
For correct operation of the starting signal, there should be a distant signal on the approach, then a home signal at the entry, to the next station yard.
In game, to obtain a more realisitic speed profile for trains travelling between station yards, an invisible signal can be added to the track at the driver sighting distance from the distant signal.
The distance (metres) between this signal and (a) the outer home signal associated with this signal, (b) an approaching train beyond which the signal is held at STOP, can be set by the user in the Properties editor. The default home-signal distance is 300m and default approach distance is 1300m."
kind                                    "mosignal"
function                                "TrackSignal"
script                                  "vsrsemaphoresignal_starting_v5"
class                                   "VSRSemaphoreSignal"
category-class                          "WA"
category-region                         "AU"
category-era                            "1900s;1910s;1920s;1930s;1940s;1950s;1960s;1970s"
trainz-build                            4.2
trackside                               -2.75
mesh-detail-level-count                 4
mesh-table
{
  default
  {
    mesh                                "default.im"
    auto-create                         1
  }
  main_lod0
  {
    mesh                                "main_0.im"
    auto-create                         1
    lod-level                           0
  }
  main_lod1
  {
    mesh                                "main_1.im"
    auto-create                         1
    lod-level                           1
  }
  main_lod2
  {
    mesh                                "main_2.im"
    auto-create                         1
    lod-level                           2
  }
  main_lod3
  {
    mesh                                "main_3.im"
    auto-create                         1
    lod-level                           3
  }
  arm_semaphore
  {
    mesh                                "arm.lm"
    anim                                "arm.kin"
    auto-create                         1
  }
}
signals
{
  0
  {
    light                               0,2
  }
  8
  {
    light                               1
  }
}
lights
{
  0
  {
    corona                              "corona_red.texture"
  }
  1
  {
    corona                              "corona_green.texture"
  }
  2
  {
    corona                              "corona_white.texture"
  }
}
extensions
{
  signal-has-bounce-animation-60850     0
  signal-arms-60850
  {
    0
    {
    }
    8
    {
      arm_semaphore                     1
    }
  }
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
string-table
{
  prompt_homedist                       "Track distance (metres) between this signal and its associated (outer) home signal :"
  prompt_approachdist                   "Track distance between this signal and an approaching train beyond which signal is held at STOP :"
}
kuid-table
{
}

Файлы:

arm.lm.txt	174 B
arm.kin	6.0 kB
corona_green.texture.txt	35 B
corona_red.texture.txt	33 B
corona_white.texture.txt	35 B
default.im	1.4 kB
diffuse-diffuse.texture.txt	49 B
corona_green.tga	16.0 kB
corona_red.tga	16.0 kB
corona_white.tga	16.0 kB
normal-normal.texture.txt	72 B
arm_med.im	56.6 kB
main_3.im	31.9 kB
main_2.im	47.1 kB
main_1.im	63.3 kB
arm.im	109.8 kB
thumbnail.jpg	29.9 kB
vsrsemaphoresignal_starting_v5.gs	26.6 kB
main_0.im	142.9 kB
diffuse.tga	4.0 MB
normal.tga	4.0 MB
Общий объём файлов:	8.6 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:368725:65084:4>	mosignal	NSWGR LQ semaphore mechanical starting signal, op detect, elec light, on 22ft wooden post	4.2	26.08.2024 18:31:27	3.7 MB
<kuid2:368725:65084:2>	mosignal	NSWGR LQ semaphore mechanical starting signal, op detect, elec light, on 22ft wooden post	4.2	18.10.2021 18:01:26	3.7 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет