<kuid2:368725:65055:2> NSWGR 3-arm semaphore shunt signal, ShA SetB SetB, lower quadrant, op detect, 22ft post mount

Тип: Сигнал
Опубликовано: 13.01.2021 1:25:36
Скачиваний: 17
Размер: 3.9 MB

Скачать

A lower-quadrant, manually-operated, semaphore signal with 3 vertically-aligned arms mounted on a 22ft post.
The semaphore arms from top to bottom are: 1) Shunt Ahead, diverging left onto track with same direction as the shunt movement; 2) Set Back straight ahead against the normal direction of the track; 3) Set Back, diverging right onto track with opposite direction as the shunt movement.
Each semaphore has a rod linkage to an operating-detection relay switch mounted underneath it. This was used to toggle a lamp mounted in line with the signal-box lever which operated the respective semaphore. Such detection circuits were used when sighting a signal from the signal box was not possible.
For correct automatic operation the signal must be used with directional feathers to uniquely identify the 3 possible paths indicated by each semaphore. Use <kuid2:60850:23911:4> 'Sig T Feather Left 1 (pos 1)' to mark the path of the top semaphore; <kuid2:60850:23901:4> 'Sig T Feather Straight' to mark the path of the middle semaphore; and <kuid2:60850:23921:4> 'Sig T Feather Right 1 (pos 4)' to mark the path of the bottom semaphore.

config.txt:

username                                "NSWGR 3-arm semaphore shunt signal, ShA SetB SetB, lower quadrant, op detect, 22ft post mount"
description                             "A lower-quadrant, manually-operated, semaphore signal with 3 vertically-aligned arms mounted on a 22ft post. 
The semaphore arms from top to bottom are: 1) Shunt Ahead, diverging left onto track with same direction as the shunt movement; 2) Set Back straight ahead against the normal direction of the track; 3) Set Back, diverging right onto track with opposite direction as the shunt movement.
Each semaphore has a rod linkage to an operating-detection relay switch mounted underneath it. This was used to toggle a lamp mounted in line with the signal-box lever which operated the respective semaphore. Such detection circuits were used when sighting a signal from the signal box was not possible.
For correct automatic operation the signal must be used with directional feathers to uniquely identify the 3 possible paths indicated by each semaphore. Use <kuid2:60850:23911:4> 'Sig T Feather Left 1 (pos 1)' to mark the path of the top semaphore; <kuid2:60850:23901:4> 'Sig T Feather Straight' to mark the path of the middle semaphore; and <kuid2:60850:23921:4> 'Sig T Feather Right 1 (pos 4)' to mark the path of the bottom semaphore."
kuid                                    <kuid2:368725:65055:2>
kind                                    "mosignal"
function                                "TrackSignal"
script                                  "vsrsemaphoresignal_202009"
class                                   "VSRSemaphoreSignal"
category-class                          "WA"
category-region                         "AU"
category-era                            "1900s;1910s;1920s;1930s;1940s;1950s;1960s;1970s"
trainz-build                            4.2
trackside                               -2.75
mesh-detail-level-count                 4
mesh-table
{
  main_lod0
  {
    mesh                                "main_0.im"
    auto-create                         1
    lod-level                           0
  }
  main_lod1
  {
    mesh                                "main_1.im"
    auto-create                         1
    lod-level                           1
  }
  main_lod2
  {
    mesh                                "main_2.im"
    auto-create                         1
    lod-level                           2
  }
  main_lod3
  {
    mesh                                "main_3.im"
    auto-create                         1
    lod-level                           3
  }
  arm_semaphore_top
  {
    mesh                                "arm_t.lm"
    anim                                "arm_t.kin"
    auto-create                         1
  }
  arm_semaphore_mid
  {
    mesh                                "arm_m.lm"
    anim                                "arm_m.kin"
    auto-create                         1
  }
  arm_semaphore_low
  {
    mesh                                "arm_l.lm"
    anim                                "arm_l.kin"
    auto-create                         1
  }
}
signals
{
  0
  {
    light                               0,2,4,6,7,8
  }
  5
  {
    light                               1,2,4,7,8
  }
  6
  {
    light                               0,2,5,6,7
  }
  8
  {
    light                               0,3,4,6,8
  }
}
lights
{
  0
  {
    corona                              "corona_red.texture"
  }
  1
  {
    corona                              "corona_green.texture"
  }
  2
  {
    corona                              "corona_red.texture"
  }
  3
  {
    corona                              "corona_green.texture"
  }
  4
  {
    corona                              "corona_red.texture"
  }
  5
  {
    corona                              "corona_green.texture"
  }
  6
  {
    corona                              "corona_white.texture"
  }
  7
  {
    corona                              "corona_white.texture"
  }
  8
  {
    corona                              "corona_white.texture"
  }
}
extensions
{
  signal-has-bounce-animation-60850     0
  signal-arms-60850
  {
    0
    {
    }
    5
    {
      arm_semaphore_top                 1
    }
    6
    {
      arm_semaphore_low                 1
    }
    8
    {
      arm_semaphore_mid                 1
    }
  }
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
string-table
{
  prompt_approachdist                   "Track distance (metres) between this signal and an approaching train beyond which the signal is held at STOP :"
}
kuid-table
{
}

Файлы:

arm_l.lm.txt	178 B
arm_m.lm.txt	178 B
arm_l.kin	6.0 kB
arm_t.lm.txt	178 B
arm_t.kin	6.0 kB
arm_m.kin	6.0 kB
corona_green.texture.txt	35 B
corona_red.texture.txt	33 B
corona_green.tga	16.0 kB
corona_white.texture.txt	35 B
corona_red.tga	16.0 kB
arm_l_med.im	39.5 kB
corona_white.tga	16.0 kB
arm_m_med.im	39.6 kB
arm_t_med.im	37.5 kB
main_3.im	46.1 kB
shunt_semaphore-shunt_semaphore.texture.txt	65 B
arm_m.im	122.7 kB
arm_l.im	120.7 kB
shunt_semaphore_normal-shunt_semaphore_normal.texture.txt	104 B
arm_t.im	118.1 kB
main_2.im	85.4 kB
thumbnail.jpg	27.8 kB
vsrsemaphoresignal_202009.gs	28.1 kB
main_1.im	168.1 kB
main_0.im	268.0 kB
shunt_semaphore.tga	4.0 MB
shunt_semaphore_normal.tga	4.0 MB
Общий объём файлов:	9.1 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:368725:65055:2>	mosignal	NSWGR 3-arm semaphore shunt signal, ShA SetB SetB, lower quadrant, op detect, 22ft post mount	4.2	13.01.2021 1:25:36	3.9 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет