<kuid2:368725:25060:2> NSWGR 10000g water tank with jib, no fixed tracks

Тип: Индустрия
Опубликовано: 6.10.2025 0:22:47
Скачиваний: 3
Размер: 4.0 MB

Скачать

A 10000-gallon, 18x18x5 ft water tank with hanging jib designed by New South Wales Government Railways with a valve operable by lever mounted on the end of the jib. Modelled on a tank in use at Willow Tree in the 1950s.
In game, an engine can stay attached to a consist while watering.
There are no fixed tracks. Instead the user must place a trackmark on the track spline that passes the tank, centred on the Surveyor-only blue wedge. The trackmark must point in the same direction as the wedge.
Given the localised name of the water tank is 'myName', the trackmark must be named <myName> + '-mark'.
Adjust the trigger radii of the trackmark to 6m.
The tank should not be placed on heavily graded track.
The jib is animated. It will rotate by 90 degrees or 38 degrees depending on whether the loco's water port is centrally located (standard) or on a side tank, respectively. The presence of a side tank port is indicated to the water tank's script by use of a 'yes' value for a 'lsp_side-tank' tag in the 'extensions' container of the vehicle's config file.
If accurate alignment between the jib and the loco's water port is to be achieved, the longitudinal offset (metres) from the vehicle's pivot point (main mesh origin) and its water port must be specified by a 'lsp_offset_water' tag in the vehicle's extensions container.
For locos under player control, the player should spot a tender's water port adjacent to the jib's rotation axis or at the jib-facing edge of the drain grill for a side-tank engine. Under AI control, use the 'Drive to Track Mark' command. Because there are no fixed tracks, the 'Drive to (industry)' command cannot be used.

config.txt:

kuid                                    <kuid2:368725:25060:2>
username                                "NSWGR 10000g water tank with jib, no fixed tracks"
description                             "A 10000-gallon, 18x18x5 ft water tank with hanging jib designed by New South Wales Government Railways with a valve operable by lever mounted on the end of the jib. Modelled on a tank in use at Willow Tree in the 1950s.
In game, an engine can stay attached to a consist while watering.
There are no fixed tracks. Instead the user must place a trackmark on the track spline that passes the tank, centred on the Surveyor-only blue wedge. The trackmark must point in the same direction as the wedge.
Given the localised name of the water tank is 'myName', the trackmark must be named <myName> + '-mark'.
Adjust the trigger radii of the trackmark to 6m.
The tank should not be placed on heavily graded track.
The jib is animated. It will rotate by 90 degrees or 38 degrees depending on whether the loco's water port is centrally located (standard) or on a side tank, respectively. The presence of a side tank port is indicated to the water tank's script by use of a 'yes' value for a 'lsp_side-tank' tag in the 'extensions' container of the vehicle's config file.
If accurate alignment between the jib and the loco's water port is to be achieved, the longitudinal offset (metres) from the vehicle's pivot point (main mesh origin) and its water port must be specified by a 'lsp_offset_water' tag in the vehicle's extensions container.
For locos under player control, the player should spot a tender's water port adjacent to the jib's rotation axis or at the jib-facing edge of the drain grill for a side-tank engine. Under AI control, use the 'Drive to Track Mark' command. Because there are no fixed tracks, the 'Drive to (industry)' command cannot be used."
author                                  "Leigh Stokes (ElStoko)"
kind                                    "industry"
trainz-build                            4.2
category-class                          "BIN"
category-region                         "AU"
category-era                            "1910s;1920s;1930s;1940s;1950s;1960s"
script                                  "water_crane_single sided_v11 i1_nft"
class                                   "water_column"
height-range                            -1,1
mesh-detail-level-count                 5
mesh-table
{
  default
  {
    mesh                                "default.im"
    auto-create                         1
    effects
    {
      trackmark
      {
        kind                            "attachment"
        att                             "a.trackmark"
        default-mesh                    <kuid:368725:90047>
        surveyor-only                   1
      }
    }
  }
  main_lod0
  {
    mesh                                "main_0.im"
    auto-create                         1
    lod-level                           0
  }
  main_lod1
  {
    mesh                                "main_1.im"
    auto-create                         1
    lod-level                           1
  }
  main_lod2
  {
    mesh                                "main_2.im"
    auto-create                         1
    lod-level                           2
  }
  main_lod3
  {
    mesh                                "main_3.im"
    auto-create                         1
    lod-level                           3
  }
  main_lod4
  {
    mesh                                "main_4.im"
    auto-create                         1
    lod-level                           3
  }
  chain_lod0
  {
    mesh                                "chain_0.im"
    auto-create                         1
    lod-level                           0
  }
  chain_lod1
  {
    mesh                                "chain_1.im"
    auto-create                         1
    lod-level                           1
  }
  chain_lod2
  {
    mesh                                "chain_2.im"
    auto-create                         1
    lod-level                           2
  }
  jib
  {
    mesh                                "jib.lm"
    anim                                "jib.kin"
    auto-create                         1
  }
  lever_closed
  {
    mesh                                "lever_closed.lm"
    att                                 "a.lever"
    att-parent                          "jib"
    auto-create                         1
  }
  lever_open
  {
    mesh                                "lever_open.lm"
    att                                 "a.lever"
    att-parent                          "jib"
    auto-create                         0
  }
}
queues
{
  water
  {
    size                                100000
    initial-count                       100000
    product-kuid                        <kuid:-3:10004>
    allowed-products
    {
      0                                 <kuid:-3:10004>
    }
  }
}
processes
{
  generate_water
  {
    start-enabled                       1
    duration                            60
    inputs
    {
    }
    outputs
    {
      0
      {
        amount                          1000
        queue                           "water"
      }
    }
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
string-table
{
}
kuid-table
{
  water                                 <kuid:-3:10004>
  0                                     <kuid:368725:90047>
}

Файлы:

covered water tank 2-covered water tank 2.texture.txt	75 B
covered water tank 2_normal-covered water tank 2_normal.texture.txt	114 B
default.im	924 B
chain_2.im	12.6 kB
jib.lm.txt	282 B
jib-jib.texture.txt	41 B
jib.kin	8.6 kB
chain_1.im	83.4 kB
jib_lod1.im	71.2 kB
jib_lod3.im	8.8 kB
chain_0.im	136.4 kB
jib_normal-jib_normal.texture.txt	80 B
jib_lod2.im	34.7 kB
jib_lod0.im	96.2 kB
lever_closed.lm.txt	197 B
lever_closed_lod1.im	10.7 kB
lever_open.lm.txt	193 B
lever_closed_lod0.im	42.0 kB
lever_open_lod1.im	10.5 kB
lever_open_lod0.im	42.1 kB
main_4.im	48.3 kB
water_crane_single sided_v11 i1_nft.gs	28.7 kB
thumbnail.jpg	41.2 kB
main_3.im	267.2 kB
main_2.im	407.1 kB
main_1.im	552.5 kB
main_0.im	694.8 kB
jib.tga	1.0 MB
jib_normal.tga	1.0 MB
covered water tank 2.tga	2.0 MB
covered water tank 2_normal.tga	2.0 MB
Общий объём файлов:	8.5 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:368725:25060:2>	industry	NSWGR 10000g water tank with jib, no fixed tracks	4.2	6.10.2025 0:22:47	4.0 MB
<kuid2:368725:25060:1>	industry	NSWGR 10000g water tank with jib, no fixed tracks	4.2	26.09.2025 4:22:34	4.0 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-3:10004>	#-3	product	Вода	0	20.10.2022 23:31:06	5.6 kB
<kuid2:368725:90047:1>	#368725	mesh	Track mark outline	3.7	24.06.2020 14:18:45	5.2 kB
Всего связей: 2, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:368725:100042:2>	#368725	map	Liverpool Range - Wingen-Braefield - ROUTE	5.6	25.09.2025 19:44:30	107.6 MB