<kuid2:368725:25058:2> NSW locomotive sand bin, 3000 litres, no fixed tracks

Тип: Индустрия
Опубликовано: 6.10.2025 0:19:00
Скачиваний: 3
Размер: 2.2 MB

Скачать

A bin for loading sand to locomotives. This is an interactive industry asset that can be re-filled with dry sand from a wagon and transfer sand to the sand queues of locomotives.
At minor loco depots in NSW labour-saving sanding systems were not justified. Instead, dry sand was delivered from the nearest major depot and stored in various types of vessel. The most basic vessel was a ground-level box with a hinged lid. The sand was scooped out of the bin into a jug or scoop which was carried to the loco sand container and poured in.
There is only 1 product queue holding 1 sand product, <kuid:30671:925059004> 'engine sand'. However this product can be used to top up locos with a reverse-motion sand queue holding product <kuid:368725:35047> 'Engine sand for reverse-motion sandboxes'.
There are no fixed tracks. Instead the user must place a trackmark on 1 or 2 tracks that pass near the bin. Adjust the trigger radii of the trackmarks to 10m. It is advisable to use a scenery sign next to each trackmark (for example, <kuid:368725:40025> 'industry track mark position sign') so that the player can see where to stop the loco or sand wagon for interaction with the sand bin.
Given the localised name of the sand bin is 'myName', the trackmarks must be named <myName> + '-mark-1' and <myName> + '-mark-2'. '-mark-1' allows unloading a wagon to the bin as well as loading a loco from the bin, so it should be located as close as possible to the front of the bin. '-mark-2' allows loading a loco from the bin only.
For the correct wagon side door to open when unloading sand to the bin, the '-mark-1' trackmark must point towards the end of the bin where the lid has its handle.
To indicate the location of the trackmarks with a sign, use <kuid:368725:40025> 'industry track mark position sign'.
The bin's lid is animated. It will open whenever the bin is being loaded or unloaded. Player drivers should not move a train away from the bin while the lid is open (indicating loading/unloading is still in progress).
An animated load inside the bin indicates the amount of sand held by the bin.

config.txt:

kuid                                    <kuid2:368725:25058:2>
username                                "NSW locomotive sand bin, 3000 litres, no fixed tracks"
description                             "A bin for loading sand to locomotives. This is an interactive industry asset that can be re-filled with dry sand from a wagon and transfer sand to the sand queues of locomotives.
At minor loco depots in NSW labour-saving sanding systems were not justified. Instead, dry sand was delivered from the nearest major depot and stored in various types of vessel. The most basic vessel was a ground-level box with a hinged lid. The sand was scooped out of the bin into a jug or scoop which was carried to the loco sand container and poured in.
There is only 1 product queue holding 1 sand product, <kuid:30671:925059004> 'engine sand'. However this product can be used to top up locos with a reverse-motion sand queue holding product <kuid:368725:35047> 'Engine sand for reverse-motion sandboxes'.
There are no fixed tracks. Instead the user must place a trackmark on 1 or 2 tracks that pass near the bin. Adjust the trigger radii of the trackmarks to 10m. It is advisable to use a scenery sign next to each trackmark (for example, <kuid:368725:40025> 'industry track mark position sign') so that the player can see where to stop the loco or sand wagon for interaction with the sand bin.
Given the localised name of the sand bin is 'myName', the trackmarks must be named <myName> + '-mark-1' and <myName> + '-mark-2'. '-mark-1' allows unloading a wagon to the bin as well as loading a loco from the bin, so it should be located as close as possible to the front of the bin. '-mark-2' allows loading a loco from the bin only.
For the correct wagon side door to open when unloading sand to the bin, the '-mark-1' trackmark must point towards the end of the bin where the lid has its handle.
To indicate the location of the trackmarks with a sign, use <kuid:368725:40025> 'industry track mark position sign'.
The bin's lid is animated. It will open whenever the bin is being loaded or unloaded. Player drivers should not move a train away from the bin while the lid is open (indicating loading/unloading is still in progress).
An animated load inside the bin indicates the amount of sand held by the bin."
author                                  "Leigh Stokes (ElStoko)"
kind                                    "industry"
trainz-build                            4.6
category-class                          "BIN"
category-region                         "AU"
category-era                            "1910s;1920s;1930s;1940s;1950s;1960s"
script                                  "sand_bin_v4 i2"
class                                   "sand_bin"
height-range                            -1,1
mesh-table-lod-transition-distances     
mesh-table
{
  bin
  {
    mesh                                "bin.trainzmesh"
    auto-create                         1
  }
  lid
  {
    mesh                                "lid.trainzmesh"
    anim                                "lid_scene.kin"
    auto-create                         1
  }
  sand
  {
    mesh                                "sand.trainzmesh"
    anim                                "sand_scene.kin"
    auto-create                         1
  }
}
queues
{
  sand
  {
    size                                3000
    initial-count                       2400
    product-kuid                        <kuid:30671:925059004>
    animated-mesh                       "sand"
    allowed-products
    {
      0                                 <kuid:30671:925059004>
    }
  }
}
processes
{
  generate_sand
  {
    start-enabled                       1
    duration                            600
    inputs
    {
    }
    outputs
    {
      0
      {
        amount                          1
        queue                           "sand"
      }
    }
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
string-table
{
  track-1                               "Load or unload sand at track in front of bin"
  track-2                               "Load sand at track behind bin"
  prompt_passive_load                   "Disable loading and unloading of player-driven trains:"
  prompt_lid                            "Pose the bin lid open:"
  prompt_lid2                           "Click inside the box to toggle the lid state"
}
kuid-table
{
  sand                                  <kuid:30671:925059004>
  sand2                                 <kuid:368725:35047>
}

Файлы:

bin.trainzmesh	7.9 kB
bin_albedo.texture.txt	33 B
bin_normal.texture.txt	113 B
bin_parameters.texture.txt	96 B
lid_scene.kin	2.8 kB
lid.trainzmesh	11.6 kB
sand_albedo.texture.txt	34 B
sand.trainzmesh	2.4 kB
bin_parameters.png	33.2 kB
sand_bin_v4 i2.gs	42.6 kB
sand_normal.texture.txt	115 B
sand_parameters.png	19.7 kB
sand_parameters.texture.txt	98 B
sand_scene.kin	2.8 kB
thumbnail.jpg	33.1 kB
bin_albedo.png	441.7 kB
bin_normal.png	393.6 kB
sand_normal.png	625.5 kB
sand_albedo.png	665.3 kB
Общий объём файлов:	2.2 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:368725:25058:2>	industry	NSW locomotive sand bin, 3000 litres, no fixed tracks	4.6	6.10.2025 0:19:00	2.2 MB
<kuid2:368725:25058:1>	industry	NSW locomotive sand bin, 3000 litres, no fixed tracks	4.6	26.09.2025 4:23:09	2.2 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:30671:925059004:3>	#30671	product	Engine sand	3.5	24.06.2020 9:51:55	44.2 kB
<kuid:368725:35047>	#368725	product	Engine sand for reverse-motion sandboxes	4.2	23.05.2025 11:41:16	46.8 kB
Всего связей: 2, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:368725:100031:1>	#368725	map	Liverpool Range - Wingen-Ardglen - ROUTE	5	26.09.2025 3:46:46	66.7 MB
<kuid2:368725:100042:2>	#368725	map	Liverpool Range - Wingen-Braefield - ROUTE	5.6	25.09.2025 19:44:30	107.6 MB