<kuid2:368725:20565:1> embankment segment, dry grass, for fitting with 5ft culverts passing under roads

Тип: scenery
Опубликовано: 15.09.2025 1:26:14
Скачиваний: 8
Размер: 5.6 MB

Скачать

A 30m embankment segment with dry grass slopes for fitting where culverts are required to pass under 8m-wide roads.
Road embankments are formed by raising the Trainz ground grid above the surrounding terrain. At the place where a culvert is required, the embankment is flattened to the level of the surrounding terrain and 2 instances of this asset, one on each side of the embankment, are placed to bridge the resulting gap.
This embankment is designed to work with <kuid:368725:20561> 'concrete culvert portal and pipe 5ft'.
Open this asset's Properties editor to raise the central notch to a height where the culvert will fit snugly at ground level. Minor adjustments to the ground height near the portal floor may be required to get a good seal.
Other associated assets are:
<kuid:368725:20563> 'embankment segment, crushed sandstone, for fitting with 5ft culverts under roads'
<kuid:368725:20564> 'embankment segment, green grass, for fitting with 5ft culverts under roads'
<kuid:368725:30163> 'stone sediment, lightly grassed, 11m wide (dry water course spline)' - used to cover the portal dighole's horizontal component.
<kuid:368725:30164> 'stone sediment, lightly grassed, 14m wide (dry water course spline)'.

config.txt:

kuid                                    <kuid2:368725:20565:1>
username                                "embankment segment, dry grass, for fitting with 5ft culverts passing under roads"
description                             "A 30m embankment segment with dry grass slopes for fitting where culverts are required to pass under 8m-wide roads.
Road embankments are formed by raising the Trainz ground grid above the surrounding terrain. At the place where a culvert is required, the embankment is flattened to the level of the surrounding terrain and 2 instances of this asset, one on each side of the embankment, are placed to bridge the resulting gap.
This embankment is designed to work with <kuid:368725:20561> 'concrete culvert portal and pipe 5ft'.
Open this asset's Properties editor to raise the central notch to a height where the culvert will fit snugly at ground level. Minor adjustments to the ground height near the portal floor may be required to get a good seal.
Other associated assets are:
<kuid:368725:20563> 'embankment segment, crushed sandstone, for fitting with 5ft culverts under roads'
<kuid:368725:20564> 'embankment segment, green grass, for fitting with 5ft culverts under roads'
<kuid:368725:30163> 'stone sediment, lightly grassed, 11m wide (dry water course spline)' - used to cover the portal dighole's horizontal component.
<kuid:368725:30164> 'stone sediment, lightly grassed, 14m wide (dry water course spline)'."
kind                                    "scenery"
category-region                         "AU"
category-era                            "1930s;1940s;1950s;1960s;1970s;1980s;1990s"
category-class                          "BT"
height-range                            10,-10
rollstep                                0.1
rotate-yz-range                         -10,10
trainz-build                            4.5
script                                  "embankment_2"
class                                   "embankment"
author                                  "Leigh Stokes (ElStoko)"
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
mesh-table
{
  default
  {
    mesh                                "bank.im"
    auto-create                         1
  }
  aperture-1
  {
    mesh                                "aperture 1.im"
    auto-create                         1
  }
  aperture-2
  {
    mesh                                "aperture 2.im"
    auto-create                         0
  }
  aperture-3
  {
    mesh                                "aperture 3.im"
    auto-create                         0
  }
  aperture-4
  {
    mesh                                "aperture 4.im"
    auto-create                         0
  }
  aperture-5
  {
    mesh                                "aperture 5.im"
    auto-create                         0
  }
  aperture-6
  {
    mesh                                "aperture 6.im"
    auto-create                         0
  }
  aperture-7
  {
    mesh                                "aperture 7.im"
    auto-create                         0
  }
  aperture-8
  {
    mesh                                "aperture 8.im"
    auto-create                         0
  }
  aperture-9
  {
    mesh                                "aperture 9.im"
    auto-create                         0
  }
  aperture-10
  {
    mesh                                "aperture 10.im"
    auto-create                         0
  }
}
string-table
{
  prompt_notch                          "Notch height index ="
}
kuid-table
{
}

Файлы:

aperture 1.im	2.1 kB
aperture 3.im	2.1 kB
aperture 4.im	2.1 kB
aperture 8.im	2.1 kB
aperture 6.im	2.2 kB
aperture 7.im	2.1 kB
bank.im	1.8 kB
aperture 5.im	2.1 kB
embankment3_diffuse-embankment3_diffuse.texture.txt	73 B
aperture 10.im	1.7 kB
aperture 2.im	2.1 kB
aperture 9.im	1.7 kB
embankment3_normal-embankment3_normal.texture.txt	96 B
embankment_2.gs	2.9 kB
thumbnail.jpg	11.1 kB
embankment3_normal.tga	4.0 MB
embankment3_diffuse.tga	4.0 MB
Общий объём файлов:	8.0 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:368725:20565:1>	scenery	embankment segment, dry grass, for fitting with 5ft culverts passing under roads	4.5	15.09.2025 1:26:14	5.6 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:368725:100042:2>	#368725	map	Liverpool Range - Wingen-Braefield - ROUTE	5.6	25.09.2025 19:44:30	107.6 MB