<kuid2:368725:20463:2> NSWGR switch direction indicator, push Fwd/Back, default direction R/L

Тип: buildable
Опубликовано: 26.09.2025 4:17:49
Скачиваний: 12
Размер: 2.3 MB

Скачать

A mechanically-driven rotating disc indicator to inform in which direction a junction is switched.
Designed for use in conjunction with (a) 'Protrack NSWGR' series with<kuid:368725:49000> 'Protrack NSWGR Mesh Library', and (b) an invisible mojunction asset such as <kuid2:44090:1007:1> Invisible Lever.
The indicator is driven by the same rod that operates the junction. The model will cover 2 applications: 1) the rodding pushes the indicator crank from the front (viewed from the facing side of the junction) and the default switch direction is right, and 2) the rodding pushes the indicator crank from the rear and the default switch direction is left.
Extend rod spline <kuid:368725:30071> 'point rodding, no guide, 1x, NSWGR' that connects to the junction switchblade until it appears on the other side of the track to that on which it approached the point. Terminate the extension when it has covered the rod attached to the indicator model. The model's attached rod will emerge when the indicator toggles.
Note that this asset cannot by itself switch the direction of a junction. An invisible switch lever must be added to the junction. An association between the invisible lever and the switch-direction indicator is established through a naming convention. If the invisible lever is named 'HR_16', then the indicator must be named the same way with the suffix '_i' appended: 'HR_16_i'.

config.txt:

kuid                                    <kuid2:368725:20463:2>
username                                "NSWGR switch direction indicator, push Fwd/Back, default direction R/L"
description                             "A mechanically-driven rotating disc indicator to inform in which direction a junction is switched. 
Designed for use in conjunction with (a) 'Protrack NSWGR' series with<kuid:368725:49000> 'Protrack NSWGR Mesh Library', and (b) an invisible mojunction asset such as <kuid2:44090:1007:1> Invisible Lever. 
The indicator is driven by the same rod that operates the junction. The model will cover 2 applications: 1) the rodding pushes the indicator crank from the front (viewed from the facing side of the junction) and the default switch direction is right, and 2) the rodding pushes the indicator crank from the rear and the default switch direction is left. 
Extend rod spline <kuid:368725:30071> 'point rodding, no guide, 1x, NSWGR' that connects to the junction switchblade until it appears on the other side of the track to that on which it approached the point. Terminate the extension when it has covered the rod attached to the indicator model. The model's attached rod will emerge when the indicator toggles.
Note that this asset cannot by itself switch the direction of a junction. An invisible switch lever must be added to the junction. An association between the invisible lever and the switch-direction indicator is established through a naming convention. If the invisible lever is named 'HR_16', then the indicator must be named the same way with the suffix '_i' appended: 'HR_16_i'."
kind                                    "buildable"
trainz-build                            4.3
category-class                          "WX"
category-region                         "AU"
category-era                            "1900s;1910s;1920s;1930s;1940s;1950s;1960s;1970s"
script                                  "indicator_v2"
class                                   "indicator"
nightmode                               "lamp"
height-range                            -1,1
mesh-detail-level-count                 3
mesh-table
{
  default
  {
    mesh                                "default.im"
    auto-create                         1
  }
  non-animated
  {
    mesh                                "non-anim.im"
    auto-create                         1
    lod-level                           0
  }
  non-animated_lod1
  {
    mesh                                "non-anim_lod1.im"
    auto-create                         1
    lod-level                           1
  }
  non-animated_lod2
  {
    mesh                                "non-anim_lod2.im"
    auto-create                         1
    lod-level                           2
  }
  disc
  {
    mesh                                "disc.lm"
    anim                                "disc.kin"
    auto-create                         1
  }
  crank
  {
    mesh                                "crank.im"
    anim                                "crank.kin"
    auto-create                         1
  }
  rod
  {
    mesh                                "rod.lm"
    anim                                "rod.kin"
    auto-create                         1
  }
  dummy-1
  {
    mesh                                "dummy.im"
    auto-create                         0
  }
  arrow-night-1
  {
    mesh                                "arrow-night-1.im"
    night-mesh-base                     "dummy-1"
  }
  dummy-2
  {
    mesh                                "dummy.im"
    auto-create                         0
  }
  arrow-night-2
  {
    mesh                                "arrow-night-2.im"
    night-mesh-base                     "dummy-2"
  }
}
attached-track
{
  rod-attach
  {
    track                               <kuid:368725:30070>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.rod0a"
      1                                 "a.rod0b"
    }
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
  arrow                                 <kuid:368725:30070>
}

Файлы:

arrow-night-1.im	832 B
arrow-night-2.im	832 B
disc_low.kin	1.9 kB
disc.lm.txt	227 B
crank.im	5.4 kB
disc_med.kin	1.9 kB
indicator_v2.gs	5.4 kB
rod.kin	1.9 kB
dummy.im	960 B
default.im	1.8 kB
rod.lm.txt	174 B
crank.kin	1.9 kB
disc_low.im	9.4 kB
disc.kin	1.9 kB
switch-direction-normal-switch-direction-normal.texture.txt	106 B
switch-direction-switch-direction.texture.txt	67 B
disc_med.im	16.7 kB
non-anim_lod2.im	21.2 kB
disc.im	26.7 kB
rod_low.im	11.9 kB
rod.im	14.4 kB
thumbnail.jpg	45.2 kB
non-anim_lod1.im	48.3 kB
non-anim.im	89.7 kB
switch-direction.tga	2.0 MB
switch-direction-normal.tga	2.0 MB
Общий объём файлов:	4.3 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:368725:20463:2>	buildable	NSWGR switch direction indicator, push Fwd/Back, default direction R/L	4.3	26.09.2025 4:17:49	2.3 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:368725:30070:1>	#368725	track	Invisible path for scenery attached track, arrow at origin end	3.7	21.04.2023 19:16:20	8.6 kB
Всего связей: 1, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:368725:100031:1>	#368725	map	Liverpool Range - Wingen-Ardglen - ROUTE	5	26.09.2025 3:46:46	66.7 MB
<kuid2:368725:100042:2>	#368725	map	Liverpool Range - Wingen-Braefield - ROUTE	5.6	25.09.2025 19:44:30	107.6 MB