<kuid:359354:105877> TPTC SD40T2 cab

Тип: Кабина
Опубликовано: 20.04.2021 20:01:39
Скачиваний: 66
Размер: 4.7 MB

Скачать

Mesh by MSP.
Retextured by BTVFD
SD40-T2 cab.
This cab has been made specifically to be used with the TWIN PEAKS SD40-T2 locomotives that I have created. This cab is not 100% accurate, but I think it is a reasonable representation, and I hope that folks will enjoy it.

config.txt:

kuid                                    <kuid:359354:105877>
username                                "TPTC SD40T2 cab"
trainz-build                            3.5
category-class                          "ZI"
kind                                    "interior"
cameradefault                           0
category-era                            "1960s;1970s;1980s;1990s;2000s;2010s"
category-region                         "US"
description                             "Mesh by MSP.
Retextured by BTVFD
 SD40-T2 cab.
This cab has been made specifically to be used with the TWIN PEAKS SD40-T2 locomotives that I have created.  This cab is not 100% accurate, but I think it is a reasonable representation, and I hope that folks will enjoy it."
license                                 "Open GL.  All rights reserved.  Any re-paints may be distributed to the Auran DLS.  Distribution via other outlets to be by original author's consent only."
author                                  "BTVFD"
mesh-table
{
  sd_cab
  {
    mesh                                "cab/SD_cab.im"
    auto-create                         1
  }
  reverser_lever
  {
    mesh                                "cab/reverser_lever.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.55,-0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "sd_cab"
  }
  horn
  {
    mesh                                "cab/horn.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.horn"
    limits                              0,1
    angles                              0,-0.6
    notches                             0,1
    notchheight                         3,3
    radius                              0.16
    att-parent                          "sd_cab"
    mousespeed                          -2
  }
  throttle_lever
  {
    mesh                                "cab/throttle_lever.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.throttle_lever"
    limits                              0,8
    angles                              -1.415,0
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    att-parent                          "sd_cab"
  }
  trainbrake_lever
  {
    mesh                                "cab/train_brake_lever.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.train_brake_lever"
    limits                              0,4
    angles                              0,-2.4
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              0.15
    att-parent                          "sd_cab"
  }
  independantbrake_lever
  {
    mesh                                "cab/ind_brake_lever.im"
    kind                                "lever"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              0,-2.1
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,1
    radius                              0.15
    att-parent                          "sd_cab"
    auto-create                         1
  }
  speedo_needle
  {
    mesh                                "cab/speedo_needle.im"
    kind                                "needle"
    auto-create                         1
    att                                 "a.speedo"
    limits                              0,40
    att-parent                          "sd_cab"
  }
  ampmeter_needle
  {
    mesh                                "cab/ampmeter_needle.im"
    kind                                "needle"
    auto-create                         1
    att                                 "a.ampmeter"
    limits                              0,1000
    angles                              0,-1.9
    att-parent                          "sd_cab"
  }
  bploco_equaliser
  {
    mesh                                "cab/whitepress_needle.im"
    kind                                "needle"
    att                                 "a.equaliser_pressure"
    limits                              0,800
    att-parent                          "sd_cab"
    auto-create                         1
  }
  bptrainbrakepipe_needle
  {
    mesh                                "cab/whitepress_needle.im"
    kind                                "needle"
    auto-create                         1
    att                                 "a.brake_pipe_pressure"
    limits                              1,800
    att-parent                          "sd_cab"
  }
  cond_seat
  {
    mesh                                "cab/cond_seat.im"
    att                                 "a.chair1"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0.1,8
    radius                              0.25
    mousespeed                          1
  }
  sand_lever
  {
    mesh                                "cab/sand_lever.im"
    att                                 "a.switch0"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    angles                              0,-0.75
    notches                             0,0.5,1
    notchheight                         1,1,1
  }
  engineers_seat
  {
    mesh                                "cab/eng_seat.im"
    att                                 "a.chair0"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    radius                              0.25
    angles                              -0.5,8
    mousespeed                          1
  }
  cond_seat_arm1
  {
    mesh                                "cab/cond_arm1.im"
    att                                 "a.cond_arm1"
    att-parent                          "cond_seat"
    auto-create                         1
    kind                                "lever"
    angles                              0,-1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
  }
  sunvisor1
  {
    mesh                                "cab/sun_visor3.im"
    att                                 "a.sunvisor0"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,3
    radius                              0.25
    mousespeed                          1
  }
  sunvisor2
  {
    mesh                                "cab/sun_visor2.im"
    att                                 "a.sunvisor1"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,3
    radius                              0.25
    mousespeed                          1
  }
  cond_seat_arm2
  {
    mesh                                "cab/cond_arm2.im"
    att                                 "a.cond_arm2"
    att-parent                          "cond_seat"
    auto-create                         1
    angles                              0,-1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "lever"
  }
  eng_arm1
  {
    mesh                                "cab/eng_arm1.im"
    att                                 "a.eng_arm1"
    att-parent                          "engineers_seat"
    auto-create                         1
    angles                              0,-1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "lever"
  }
  eng_arm2
  {
    mesh                                "cab/eng_arm2.im"
    att                                 "a.eng_arm2"
    att-parent                          "engineers_seat"
    auto-create                         1
    angles                              -1.5,0
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "lever"
  }
  visor_flap1
  {
    mesh                                "cab/visor_flap1.im"
    att                                 "a.visor_flap3"
    att-parent                          "sunvisor1"
    auto-create                         1
    angles                              1.5,-1.5
    notches                             0,0.125,0.25,0.325,0.5,0.625,0.75,0.825,1
    notchheight                         1,1,1,1,1,1,1,1,1
    kind                                "lever"
  }
  visor_flap2
  {
    mesh                                "cab/visor_flap2.im"
    att                                 "a.visor_flap2"
    att-parent                          "sunvisor2"
    auto-create                         1
    angles                              1.5,-1.5
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.825,1
    notchheight                         1,1,1,1,1,1,1,1,1
    kind                                "lever"
  }
  sunvisor3
  {
    mesh                                "cab/sun_visor3.im"
    att                                 "a.sunvisor2"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,3
    radius                              0.25
    mousespeed                          1
  }
  sunvisor4
  {
    mesh                                "cab/sun_visor4.im"
    att                                 "a.sunvisor3"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,2
    radius                              0.25
    mousespeed                          1
  }
  sunvisor5
  {
    mesh                                "cab/sun_visor5.im"
    att                                 "a.sunvisor4"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,-2
    radius                              0.25
    mousespeed                          1
  }
  visor_flap3
  {
    mesh                                "cab/visor_flap1.im"
    att                                 "a.visor_flap3"
    att-parent                          "sunvisor3"
    auto-create                         1
    angles                              1.5,-1.5
    notches                             0,0.125,0.25,0.325,0.5,0.625,0.75,0.825,1
    notchheight                         1,1,1,1,1,1,1,1,1
    kind                                "lever"
  }
  visor_flap4
  {
    mesh                                "cab/visor_flap1.im"
    att                                 "a.visor_flap4"
    att-parent                          "sunvisor4"
    auto-create                         1
    angles                              0,1.5
    notches                             0,0.125,0.25,0.325,0.5,0.625,0.75,0.825,1
    notchheight                         1,1,1,1,1,1,1,1,1
    kind                                "lever"
  }
  visor_flap5
  {
    mesh                                "cab/visor_flap2.im"
    att                                 "a.visor_flap5"
    att-parent                          "sunvisor5"
    auto-create                         1
    angles                              0,1.5
    notches                             0,0.125,0.25,0.325,0.5,0.625,0.75,0.825,1
    notchheight                         1,1,1,1,1,1,1,1,1
    kind                                "lever"
  }
  bplocomain_needle
  {
    mesh                                "cab/redpress_needle.im"
    kind                                "needle"
    att                                 "a.main_res_pressure"
    limits                              0,800
    att-parent                          "sd_cab"
    auto-create                         1
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "cab/redpress_needle.im"
    kind                                "needle"
    auto-create                         1
    att                                 "a.brake_cyl_pressure"
    limits                              0,800
    att-parent                          "sd_cab"
  }
  dynamicbrake_lever
  {
    mesh                                "cab/throttle_lever.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.dynamic_brake"
    limits                              0,3
    angles                              0,-1.55
    notches                             0,1
    notchheight                         0.1,1
    radius                              0.35
    att-parent                          "sd_cab"
  }
  cond_seat2
  {
    mesh                                "cab/cond_seat.im"
    att                                 "a.chair2"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0.1,8
    radius                              0.25
    mousespeed                          1
  }
  cond_seat2_arm1
  {
    mesh                                "cab/cond_arm1.im"
    att                                 "a.cond_arm1"
    att-parent                          "cond_seat2"
    auto-create                         1
    kind                                "lever"
    angles                              0,-1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
  }
  cond_seat2_arm2
  {
    mesh                                "cab/cond_arm2.im"
    att                                 "a.cond_arm2"
    att-parent                          "cond_seat2"
    auto-create                         1
    angles                              0,-1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "lever"
  }
}
cameralist
{
  camera0                               -1.245,-0.425,0.545,0,-0.105
  camera1                               -1.195,0.015,0.745,0.215,-0.34
  camera2                               0.09,-0.225,0.745,-0.115,0
  camera3                               1.245,0.3,0.745,-0.25,-0.105
  camera4                               1.245,-0.045,0.545,0.015,-0.055
  camera5                               0.065,-0.6,0.745,-2.915,-0.025
}
thumbnails
{
  0
  {
    image                               "sd-40t2 thumbnail.jpg"
    width                               280
    height                              140
  }
}
kuid-table
{
}

Файлы:

cab
cab / alpha-alpha.texture.txt	45 B
cab / cab main.texture.txt	31 B
cab / ampmeter_needle.im	2.3 kB
cab / cond_arm1.im	3.7 kB
cab / cond_arm2.im	3.7 kB
cab / eng_arm1.im	3.7 kB
cab / eng_arm2.im	3.7 kB
cab / redpress_needle.im	2.3 kB
cab / sand_lever.im	2.5 kB
cab / speedo_needle.im	1.6 kB
cab / reverser_lever.im	5.6 kB
cab / horn.im	8.4 kB
cab / ind_brake_lever.im	9.3 kB
cab / sun_visor1.im	5.9 kB
cab / cond_seat.im	17.9 kB
cab / eng_seat.im	17.9 kB
cab / sun_visor3.im	5.9 kB
cab / sun_visor2.im	7.1 kB
cab / sun_visor4.im	5.9 kB
cab / visor_flap1.im	3.6 kB
cab / visor_flap2.im	3.6 kB
cab / whitepress_needle.im	2.3 kB
cab / throttle_lever.im	6.0 kB
cab / sun_visor5.im	5.9 kB
cab / train_brake_lever.im	6.4 kB
cab / sd_cab.im	1.9 MB
cab / alpha.tga	4.0 MB
cab / cab main.tga	12.0 MB
sd-40t2 thumbnail.jpg	303.8 kB
Общий объём файлов:	18.3 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:359354:105877>	interior	TPTC SD40T2 cab	3.5	20.04.2021 20:01:39	4.7 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:359354:105874>	#359354	traincar	TPTC SD40T2	3.5	12.01.2021 22:42:56	6.3 MB