<kuid:346926:2012052> FT S-Wagen Fahrerraum

Тип: Кабина
Опубликовано: 17.01.2021 1:16:59
Скачиваний: 113
Размер: 27.5 MB
Скачать

config.txt:
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
script                                  "r.gs"
class                                   "r"
kuid                                    <kuid:346926:2012052>
kind                                    "interior"
cameralist
{
  camera0                               -0.358,1.274,0.968,-6.095,-0.179
}
cameradefault                           0
mesh-table
{
  default
  {
    mesh                                "main.im"
    auto-create                         1
  }
  horn
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.hupe"
    mesh                                "horn.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  01
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.01"
    mesh                                "01.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  02
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.02"
    mesh                                "02.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  03
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.03"
    mesh                                "03.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  04
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.04"
    mesh                                "04.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  05
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.05"
    mesh                                "05.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  06
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.06"
    mesh                                "06.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  07
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.07"
    mesh                                "07.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  08
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.08"
    mesh                                "08.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  09
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.09"
    mesh                                "09.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  10
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.10"
    mesh                                "10.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  11
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.11"
    mesh                                "11.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  12
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.12"
    mesh                                "12.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  13
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.13"
    mesh                                "13.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  15
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.15"
    mesh                                "15.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  .
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.17"
    mesh                                "17.im"
    limits                              0,2
    angles                              0.5,2
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speed.im"
    att                                 "a.speed"
    limits                              0,26
    angles                              0,4.9
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.richtungswender"
    limits                              0,2
    angles                              0.5,3.7
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.nix"
    limits                              0,4
    angles                              0,-2
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    mousespeed                          -0.5
    radius                              0.15
    att-parent                          "default"
  }
  kombimode
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.nix"
    limits                              0,1
    angles                              0.1,0
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  pantograph_lever
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.panto"
    mesh                                "panto.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  kombi_lever
  {
    kind                                "lever"
    mesh                                "kombihebel.im"
    att                                 "a.kombihebel"
    limits                              -16,16
    angles                              -0.8,0.8
    notches                             0,0.025,0.05,0.075,0.1,0.125,0.15,0.175,0.2,0.225,0.25,0.275,0.3,0.325,0.35,0.375,0.5,0.625,0.65,0.675,0.7,0.725,0.75,0.775,0.8,0.825,0.85,0.875,0.9,0.925,0.95,0.975,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
    mousespeed                          0.5
    radius                              0.26
    att-parent                          "default"
    auto-create                         1
  }
  18
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.18"
    mesh                                "18.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  19
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.19"
    mesh                                "19.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.20"
    mesh                                "20.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  21
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.21"
    mesh                                "21.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  22
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.22"
    mesh                                "22.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  23
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.23"
    mesh                                "23.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  24
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.24"
    mesh                                "24.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  25
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.25"
    mesh                                "25.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  26
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.26"
    mesh                                "26.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  27
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.27"
    mesh                                "27.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  28
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.28"
    mesh                                "28.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  29
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.29"
    mesh                                "29.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  30
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.30"
    mesh                                "30.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  31
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.31"
    mesh                                "31.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  32
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.32"
    mesh                                "32.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  33
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.33"
    mesh                                "33.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  34
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.34"
    mesh                                "34.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  35
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.35"
    mesh                                "35.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  36
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.36"
    mesh                                "36.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  37
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.37"
    mesh                                "37.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  38
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.38"
    mesh                                "38.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  39
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.39"
    mesh                                "39.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  40
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.40"
    mesh                                "40.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  41
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.41"
    mesh                                "41.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  42
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.42"
    mesh                                "42.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  43
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.43"
    mesh                                "43.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  44
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.44"
    mesh                                "44.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  45
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.45"
    mesh                                "45.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  46
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.46"
    mesh                                "46.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  dopl
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.47"
    mesh                                "47.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  docl
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.48"
    mesh                                "48.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  dopr
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.49"
    mesh                                "49.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  50
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.50"
    mesh                                "50.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  51
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.51"
    mesh                                "51.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  52
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.52"
    mesh                                "52.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  53
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.53"
    mesh                                "53.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  54
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.54"
    mesh                                "54.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
}
string-table
{
  startmode                             "extended"
  pantomode                             "auto"
  defaultkp                             "on"
  brakes_velocity                       "3.0"
  brakes_velocity_delta                 "0.05"
  helplanguage                          "de"
}
obsolete-table
{
}
trainz-build                            3.2
category-class                          "ZI"
author                                  "Alexey Gryzin"
username                                "FT S-Wagen Fahrerraum"
organisation                            "-"
contact-email                           "alterralexey@ya.ru"
contact-website                         "-"
license                                 "Freeware for private use"
kuid-table
{
}
Файлы:
01.im	2.4 kB
02.im	2.4 kB
03.im	2.4 kB
04.im	2.4 kB
05.im	2.4 kB
06.im	2.4 kB
07.im	2.4 kB
08.im	2.4 kB
09.im	2.4 kB
10.im	2.4 kB
11.im	2.4 kB
12.im	2.4 kB
13.im	2.4 kB
14.im	30.2 kB
15.im	9.0 kB
16.im	20.7 kB
17.im	13.7 kB
18.im	2.4 kB
19.im	2.4 kB
20.im	2.4 kB
21.im	2.4 kB
22.im	2.4 kB
23.im	2.4 kB
24.im	2.4 kB
25.im	2.4 kB
26.im	2.4 kB
27.im	2.4 kB
28.im	2.4 kB
29.im	2.4 kB
30.im	2.4 kB
31.im	2.4 kB
32.im	2.4 kB
33.im	2.4 kB
34.im	2.4 kB
35.im	2.4 kB
36.im	2.4 kB
37.im	2.4 kB
38.im	2.4 kB
39.im	2.5 kB
40.im	2.5 kB
41.im	2.5 kB
42.im	2.5 kB
43.im	2.5 kB
44.im	2.5 kB
45.im	2.4 kB
46.im	2.4 kB
47.im	2.4 kB
48.im	2.4 kB
49.im	2.4 kB
50.im	2.4 kB
51.im	2.4 kB
52.im	2.4 kB
53.im	3.7 kB
54.im	3.7 kB
drehschalter.im	30.2 kB
env_glass.bmp	12.1 kB
env_glass.texture.txt	32 B
horn.im	4.5 kB
kombihebel.im	45.1 kB
main.im	2.3 MB
panto.im	2.4 kB
r.gs	23.5 kB
sound
sound / cabin.txt	119 B
sound / close.wav	378.9 kB
sound / open.wav	215.3 kB
sound / signal.wav	369.0 kB
speed.im	2.4 kB
sw01.jpg	2.0 MB
sw01.texture.txt	27 B
sw01innen.jpg	9.6 MB
sw01innen.texture.txt	32 B
sw03.jpg	1.9 MB
sw03.texture.txt	27 B
sw04.jpg	199.3 kB
sw04.texture.txt	27 B
swcab01-swcab01.texture.txt	49 B
swcab01.tga	1.0 MB
swcab02.jpg	6.2 MB
swcab02.texture.txt	30 B
swcab03.jpg	6.1 MB
swcab03.texture.txt	30 B
switch.im	5.6 kB
texture dest.texture.txt	35 B
texture dest.tga	384.0 kB
thumbnail.jpg	92.9 kB
u4 cab 01.texture.txt	27 B
Общий объём файлов:	30.9 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid:346926:2012052>	interior	FT S-Wagen Fahrerraum	3.2	17.01.2021 1:16:59	27.5 MB
Зависимости:
kuid	author	kind	name	build	date	size
Нет
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid2:346926:2012001:1>	#346926	traincar	12UF-S-01-A/B	3.5	4.11.2021 11:46:16	17.4 MB