<kuid:346926:14804> 12UF-U3 Interior

Тип: Кабина
Опубликовано: 23.01.2021 12:47:56
Скачиваний: 76
Размер: 15.0 MB

Скачать

config.txt:

script                                  "r.gs"
class                                   "r"
kuid                                    <kuid:346926:14804>
kind                                    "interior"
cabin-visible-from-outside              0
outside-visible-from-cabin              0
cameralist
{
  camera0                               0.526,0.2123,0.611,-12.584,-0.15
  camera1                               -0.456,0.025,0.678,-15.692,-0.044
}
cameradefault                           0
mesh-table
{
  default
  {
    mesh                                "main.im"
    auto-create                         1
  }
  horn
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.hupe"
    mesh                                "horn.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  01
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.01"
    mesh                                "01.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  02
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.02"
    mesh                                "02.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  pantograph_lever
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.03"
    mesh                                "03.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  04
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.04"
    mesh                                "04.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  05
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.05"
    mesh                                "05.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  06
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.06"
    mesh                                "06.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  07
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.07"
    mesh                                "07.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  08
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.08"
    mesh                                "08.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  09
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.09"
    mesh                                "09.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  10
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.10"
    mesh                                "10.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  11
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.11"
    mesh                                "11.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  12
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.12"
    mesh                                "12.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  13
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.13"
    mesh                                "13.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  14
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.14"
    mesh                                "14.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  15
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.15"
    mesh                                "15.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  16
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.16"
    mesh                                "16.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  17
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.17"
    mesh                                "17.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  18
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.18"
    mesh                                "18.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speed.im"
    att                                 "a.speed"
    limits                              0,26
    angles                              0,4.9
    att-parent                          "default"
  }
  19
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "19.im"
    att                                 "a.19"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  20
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "20.im"
    att                                 "a.20"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  21
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "21.im"
    att                                 "a.21"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  22
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "22.im"
    att                                 "a.22"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  23
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "23.im"
    att                                 "a.23"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  24
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "24.im"
    att                                 "a.24"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  25
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "25.im"
    att                                 "a.25"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  26
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "26.im"
    att                                 "a.26"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  27
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "27.im"
    att                                 "a.27"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  28
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "28.im"
    att                                 "a.28"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  29
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "29.im"
    att                                 "a.29"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "30.im"
    att                                 "a.30"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  31
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "31.im"
    att                                 "a.31"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  32
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "32.im"
    att                                 "a.32"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  33
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "33.im"
    att                                 "a.33"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  34
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "34.im"
    att                                 "a.34"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  35
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "35.im"
    att                                 "a.35"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  dopl1
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "36.im"
    att                                 "a.36"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  docl
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "37.im"
    att                                 "a.37"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  38
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "38.im"
    att                                 "a.38"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  39
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "39.im"
    att                                 "a.39"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  dopl
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "40.im"
    att                                 "a.40"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  41
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "41.im"
    att                                 "a.41"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  42
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "42.im"
    att                                 "a.42"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  43
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "43.im"
    att                                 "a.43"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  44
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "44.im"
    att                                 "a.44"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  45
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "45.im"
    att                                 "a.45"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  46
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "46.im"
    att                                 "a.46"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.richtungswender"
    limits                              0,2
    angles                              4,0.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.nix"
    limits                              0,4
    angles                              0,-2
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    mousespeed                          -0.5
    radius                              0.15
    att-parent                          "default"
  }
  kombimode
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.nix"
    limits                              0,1
    angles                              0.1,0
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  kombi_lever
  {
    kind                                "lever"
    mesh                                "kombihebel.im"
    att                                 "a.kombihebel"
    limits                              -16,16
    angles                              -0.8,0.8
    notches                             0,0.025,0.05,0.075,0.1,0.125,0.15,0.175,0.2,0.225,0.25,0.275,0.3,0.325,0.35,0.375,0.5,0.625,0.65,0.675,0.7,0.725,0.75,0.775,0.8,0.825,0.85,0.875,0.9,0.925,0.95,0.975,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
    mousespeed                          0.5
    radius                              0.26
    att-parent                          "default"
    auto-create                         1
  }
}
string-table
{
  startmode                             "extended"
  pantomode                             "auto"
  defaultkp                             "on"
  brakes_velocity                       "3.0"
  brakes_velocity_delta                 "0.05"
  helplanguage                          "de"
}
trainz-build                            3.2
category-class                          "ZI"
author                                  "Alexey Gryzin"
username                                "12UF-U3 Interior"
organisation                            "-"
contact-email                           "alterralexey@ya.ru"
contact-website                         "-"
license                                 "Freeware for private use"
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
}

Файлы:

007.jpg	1.2 MB
007.texture.txt	26 B
01.im	1.4 kB
02.im	1.4 kB
03.im	1.4 kB
04.im	1.4 kB
05.im	1.4 kB
06.im	1.4 kB
07.im	1.4 kB
08.im	1.4 kB
09.im	1.4 kB
10.im	1.4 kB
11.im	1.4 kB
12.im	1.4 kB
13.im	1.4 kB
14.im	1.4 kB
15.im	1.4 kB
16.im	1.4 kB
17.im	1.4 kB
18.im	1.4 kB
19.im	1.4 kB
20.im	1.4 kB
21.im	1.4 kB
22.im	1.4 kB
23.im	1.4 kB
24.im	1.4 kB
25.im	1.4 kB
26.im	1.4 kB
27.im	1.4 kB
28.im	1.4 kB
29.im	1.4 kB
30.im	1.4 kB
31.im	1.4 kB
32.im	1.4 kB
33.im	1.4 kB
34.im	1.4 kB
35.im	1.4 kB
36.im	1.4 kB
37.im	1.4 kB
38.im	1.4 kB
39.im	1.4 kB
40.im	1.4 kB
41.im	1.4 kB
42.im	1.4 kB
43.im	1.4 kB
44.im	1.4 kB
45.im	1.4 kB
46.im	1.4 kB
bolt.jpg	17.2 kB
bolt.texture.txt	27 B
dest.jpg	56.3 kB
dest.texture.txt	27 B
drehschalter.im	23.8 kB
env_glass.jpg	3.3 kB
env_glass.texture.txt	32 B
fenster.jpg	383.7 kB
fenster.texture.txt	30 B
gauges0001_s.jpg	91.7 kB
gauges0001_s.texture.txt	35 B
horn.im	4.1 kB
ibis.jpg	555.0 kB
ibis.texture.txt	27 B
kombihebel.im	20.7 kB
kupplung-kupplung.texture.txt	51 B
kupplung.tga	256.0 kB
lights0009_1_s.jpg	44.5 kB
lights0009_1_s.texture.txt	37 B
main.im	2.1 MB
panto.im	4.6 kB
r.gs	23.5 kB
shadow-shadow.texture.txt	47 B
shadow.tga	16.0 kB
sound
sound / cabin.txt	109 B
sound / close.wav	146.6 kB
sound / open.wav	98.0 kB
sound / zt.wav	138.8 kB
speed.im	1.9 kB
switch.im	5.6 kB
tacho.jpg	566.7 kB
tacho.texture.txt	28 B
thumbnail.jpg	92.9 kB
u201.jpg	82.1 kB
u201.texture.txt	27 B
u2cab02.texture.txt	26 B
u2cab06.jpg	375.3 kB
u2cab06.texture.txt	30 B
u302.jpg	237.6 kB
u302.texture.txt	27 B
u303-noalpha.texture.txt	27 B
u303.jpg	2.2 MB
u303.texture.txt	27 B
u304.jpg	784.7 kB
u304.texture.txt	27 B
u305.jpg	1.8 MB
u305.texture.txt	27 B
u3cab01.jpg	238.8 kB
u3cab01.texture.txt	30 B
u3cab02.jpg	1.3 MB
u3cab02.texture.txt	30 B
u3cab03.jpg	1.4 MB
u3cab03.texture.txt	30 B
u3cab04.jpg	2.3 MB
u3cab04.texture.txt	30 B
u3cab05.jpg	486.8 kB
u3cab05.texture.txt	30 B
Общий объём файлов:	17.0 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:346926:14804>	interior	12UF-U3 Interior	3.2	23.01.2021 12:47:56	15.0 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:346926:14900>	#346926	traincar	12UF-U3-SVB01-A	3.2	4.11.2021 11:54:58	20.8 MB
<kuid:346926:14901>	#346926	traincar	12UF-U3-SVB01-B	3.2	4.11.2021 11:55:12	15.5 MB
<kuid:346926:14902>	#346926	traincar	12UF-U3-SVB02-A	3.2	4.11.2021 11:48:53	16.5 MB
<kuid:346926:14903>	#346926	traincar	12UF-U3-SVB02-B	3.2	23.01.2021 12:34:09	16.5 MB
<kuid:346926:14904>	#346926	traincar	12UF-U3-SVB03-A	3.2	25.10.2021 20:50:02	16.3 MB
<kuid:346926:14905>	#346926	traincar	12UF-U3-SVB03-B	3.2	4.11.2021 11:56:20	16.3 MB
<kuid:346926:14906>	#346926	traincar	12UF-U3-SVB04-A	3.2	4.11.2021 11:56:05	15.9 MB
<kuid:346926:14907>	#346926	traincar	12UF-U3-SVB04-B	3.2	4.11.2021 11:42:57	15.9 MB
<kuid:346926:14908>	#346926	traincar	12UF-U3-SVB05-A	3.2	25.10.2021 20:37:35	15.9 MB
<kuid:346926:14909>	#346926	traincar	12UF-U3-SVB05-B	3.2	25.10.2021 20:44:33	15.9 MB
<kuid:346926:14910>	#346926	traincar	12UF-U3-Orang01-A	3.2	4.11.2021 11:54:58	15.9 MB
<kuid:346926:14911>	#346926	traincar	12UF-U3-Orang01-B	3.2	4.11.2021 11:44:44	15.8 MB