<kuid:346926:12820> 12UF-U5 Interior

Тип: Кабина
Опубликовано: 20.04.2021 20:27:20
Скачиваний: 56
Размер: 34.7 MB

Скачать

config.txt:

script                                  "r.gs"
class                                   "r"
kuid                                    <kuid:346926:12820>
kind                                    "interior"
cabin-visible-from-outside              0
outside-visible-from-cabin              0
cameralist
{
  camera0                               0.055,0.009,0.539,-6.271,-0.238
}
cameradefault                           0
mesh-table
{
  default
  {
    mesh                                "main.im"
    auto-create                         1
  }
  horn
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.hupe"
    mesh                                "horn.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  01
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.01"
    mesh                                "01.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  02
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.02"
    mesh                                "02.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  03
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.03"
    mesh                                "03.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  04
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.04"
    mesh                                "04.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  05
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.05"
    mesh                                "05.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  06
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.06"
    mesh                                "06.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  07
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.07"
    mesh                                "07.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  08
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.08"
    mesh                                "08.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  09
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.09"
    mesh                                "09.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  10
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.10"
    mesh                                "10.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  11
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.11"
    mesh                                "11.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  12
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.12"
    mesh                                "12.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  13
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.13"
    mesh                                "13.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  14
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.14"
    mesh                                "14.im"
    limits                              0,2
    angles                              0.5,2
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  15
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.15"
    mesh                                "15.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  16
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.16"
    mesh                                "16.im"
    limits                              0,2
    angles                              0.5,2
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  17
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.17"
    mesh                                "17.im"
    limits                              0,2
    angles                              0.5,2
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speed.im"
    att                                 "a.speed"
    limits                              0,26
    angles                              0,4.9
    att-parent                          "default"
  }
  53
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.53"
    mesh                                "53.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  54
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.54"
    mesh                                "54.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  60
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.60"
    mesh                                "60.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  61
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.61"
    mesh                                "61.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  62
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.62"
    mesh                                "62.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  63
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.63"
    mesh                                "63.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  64
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.64"
    mesh                                "64.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  65
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.65"
    mesh                                "65.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  66
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.66"
    mesh                                "66.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  67
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.67"
    mesh                                "67.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  68
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.68"
    mesh                                "68.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  69
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.69"
    mesh                                "69.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  70
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.70"
    mesh                                "70.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  71
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.71"
    mesh                                "71.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  72
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.72"
    mesh                                "72.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  73
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.73"
    mesh                                "73.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  74
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.74"
    mesh                                "74.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  75
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.75"
    mesh                                "75.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  76
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.76"
    mesh                                "76.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  77
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.77"
    mesh                                "77.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.78"
    mesh                                "78.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  79
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.79"
    mesh                                "79.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  80
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.80"
    mesh                                "80.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  dcl
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.81"
    mesh                                "81.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  82
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.82"
    mesh                                "82.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  83
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.83"
    mesh                                "83.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  84
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.84"
    mesh                                "84.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  85
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.85"
    mesh                                "85.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  86
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.86"
    mesh                                "86.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  87
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.87"
    mesh                                "87.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  88
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.88"
    mesh                                "88.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  89
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.89"
    mesh                                "89.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  90
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.90"
    mesh                                "90.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  91
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.91"
    mesh                                "91.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  92
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.92"
    mesh                                "92.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  dopl
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.93"
    mesh                                "93.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  sign
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.94"
    mesh                                "94.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  dopr
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.95"
    mesh                                "95.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  96
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.96"
    mesh                                "96.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  97
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.97"
    mesh                                "97.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  98
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.98"
    mesh                                "98.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  99
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.99"
    mesh                                "99.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  100
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.100"
    mesh                                "100.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  101
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.101"
    mesh                                "101.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.richtungswender"
    limits                              0,2
    angles                              0.5,3.7
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.nix"
    limits                              0,4
    angles                              0,-2
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    mousespeed                          -0.5
    radius                              0.15
    att-parent                          "default"
  }
  kombimode
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.nix"
    limits                              0,1
    angles                              0.1,0
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  pantograph_lever
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.panto"
    mesh                                "panto.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  kombi_lever
  {
    kind                                "lever"
    mesh                                "kombihebel.im"
    att                                 "a.kombihebel"
    limits                              -16,16
    angles                              -0.8,0.8
    notches                             0,0.025,0.05,0.075,0.1,0.125,0.15,0.175,0.2,0.225,0.25,0.275,0.3,0.325,0.35,0.375,0.5,0.625,0.65,0.675,0.7,0.725,0.75,0.775,0.8,0.825,0.85,0.875,0.9,0.925,0.95,0.975,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
    mousespeed                          0.5
    radius                              0.26
    att-parent                          "default"
    auto-create                         1
  }
}
string-table
{
  startmode                             "extended"
  pantomode                             "auto"
  defaultkp                             "on"
  brakes_velocity                       "3.0"
  brakes_velocity_delta                 "0.05"
  helplanguage                          "de"
}
trainz-build                            3.2
category-class                          "ZI"
author                                  "Alexey Gryzin"
username                                "12UF-U5 Interior"
organisation                            "-"
contact-email                           "alterralexey@ya.ru"
contact-website                         "-"
license                                 "Freeware for private use"
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
}

Файлы:

007.texture.txt	38 B
01.im	2.2 kB
02.im	2.4 kB
03.im	2.2 kB
04.im	2.2 kB
05.im	2.2 kB
06.im	2.2 kB
07.im	2.3 kB
08.im	2.2 kB
09.im	2.2 kB
10.im	2.2 kB
100.im	5.6 kB
101.im	5.7 kB
11.im	2.2 kB
12.im	2.3 kB
13.im	2.2 kB
14.im	15.2 kB
15.im	11.2 kB
16.im	8.3 kB
17.im	15.0 kB
53.im	3.7 kB
54.im	3.7 kB
60.im	5.6 kB
61.im	5.7 kB
62.im	5.7 kB
63.im	5.6 kB
64.im	5.7 kB
65.im	5.7 kB
66.im	5.7 kB
67.im	5.6 kB
68.im	5.6 kB
69.im	5.7 kB
70.im	5.5 kB
71.im	5.6 kB
72.im	5.7 kB
73.im	5.7 kB
74.im	5.6 kB
75.im	1.3 kB
76.im	5.7 kB
77.im	1.3 kB
78.im	1.3 kB
79.im	5.6 kB
80.im	5.7 kB
81.im	5.7 kB
82.im	5.7 kB
83.im	5.7 kB
84.im	5.7 kB
85.im	5.7 kB
86.im	5.7 kB
87.im	5.7 kB
88.im	5.7 kB
89.im	5.7 kB
90.im	5.7 kB
91.im	5.7 kB
92.im	5.7 kB
93.im	5.7 kB
94.im	5.7 kB
95.im	5.7 kB
96.im	5.7 kB
97.im	5.6 kB
98.im	5.7 kB
99.im	5.7 kB
bogey u501.texture.txt	33 B
bogey_u501.jpg	113.4 kB
cabrendered1.jpg	4.4 MB
cabrendered1.texture.txt	35 B
cabrendered2.texture.txt	42 B
cabrendered21111111.jpg	4.3 MB
cabrendered21111111.texture.txt	42 B
cabrendered3.jpg	5.6 MB
cabrendered3.texture.txt	35 B
cabrendered4.jpg	3.2 MB
cabrendered4.texture.txt	35 B
drehschalter.im	15.3 kB
env_glass.jpg	3.2 kB
env_glass.texture.txt	32 B
gauges0001_s.jpg	86.0 kB
gauges0001_s.texture.txt	35 B
horn.im	2.4 kB
kombihebel.im	44.9 kB
kupplung-kupplung.texture.txt	51 B
kupplung.jpg	32.3 kB
main.im	3.1 MB
panto.im	2.2 kB
r.gs	23.5 kB
rinterior02a-rinterior02a.texture.txt	59 B
rinterior02a.jpg	59.7 kB
rpant01.jpg	32.0 kB
rpant01.texture.txt	30 B
scheibenwischer-scheibenwischer.texture.txt	38 B
scheibenwischer.jpg	105.9 kB
scheibenwischer.texture.txt	38 B
shadow-shadow.texture.txt	47 B
shadow.tga	16.0 kB
sound
sound / cabin.txt	119 B
sound / close.wav	378.9 kB
sound / open.wav	215.3 kB
sound / signal.wav	369.0 kB
speed.im	3.5 kB
swcab01-swcab01.texture.txt	49 B
swcab01.jpg	31.7 kB
texture dest.texture.txt	35 B
texture dest.tga	1.0 MB
thumbnail.jpg	92.9 kB
u403.jpg	661.3 kB
u403.texture.txt	27 B
u4tex01.jpg	2.3 MB
u4tex01.texture.txt	30 B
u501 no alpha.jpg	1.6 MB
u501 no alpha.texture.txt	36 B
u501-u501.texture.txt	43 B
u501.texture.txt	27 B
u501.tga	16.0 MB
u502.jpg	503.3 kB
u502.texture.txt	27 B
u503.jpg	2.6 MB
u503.texture.txt	27 B
u504.jpg	671.6 kB
u504.texture.txt	27 B
u505.jpg	211.0 kB
u505.texture.txt	27 B
u506.jpg	297.7 kB
u506.texture.txt	27 B
u507.jpg	194.1 kB
u507.texture.txt	27 B
u508.jpg	410.3 kB
u508.texture.txt	27 B
Общий объём файлов:	48.9 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:346926:12820>	interior	12UF-U5 Interior	3.2	20.04.2021 20:27:20	34.7 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:346926:12906>	#346926	traincar	12UF-U525-01-A	3.2	20.04.2021 20:26:18	16.0 MB
<kuid:346926:12907>	#346926	traincar	12UF-U525-01-B	3.2	4.11.2021 11:55:39	15.4 MB
<kuid:346926:12945>	#346926	traincar	12UF-U525-02-A	3.2	4.11.2021 11:40:48	17.1 MB
<kuid:346926:12946>	#346926	traincar	12UF-U525-02-B	3.2	4.11.2021 11:36:51	16.5 MB
<kuid:346926:12947>	#346926	traincar	12UF-U525-03-A	3.2	25.10.2021 20:34:37	16.0 MB
<kuid:346926:12948>	#346926	traincar	12UF-U525-03-B	3.2	4.11.2021 11:39:25	15.4 MB
<kuid:346926:12949>	#346926	traincar	12UF-U525-04-A	3.2	4.11.2021 11:38:40	16.4 MB
<kuid:346926:12950>	#346926	traincar	12UF-U525-04-B	3.2	4.11.2021 11:58:07	15.7 MB
<kuid:346926:12952>	#346926	traincar	12UF-U525-05-B	3.2	4.11.2021 11:52:45	16.9 MB
<kuid:346926:12953>	#346926	traincar	12UF-U525-05-A	3.2	4.11.2021 11:51:23	17.6 MB
<kuid:346926:12954>	#346926	traincar	12UF-U525-06-A	3.2	4.11.2021 11:49:08	17.0 MB
<kuid:346926:12955>	#346926	traincar	12UF-U525-06-B	3.2	4.11.2021 11:54:16	16.4 MB
<kuid:346926:12964>	#346926	traincar	12UF-U525-07-A	3.2	4.11.2021 11:57:14	16.8 MB
<kuid:346926:12965>	#346926	traincar	12UF-U525-07-B	3.2	4.11.2021 11:48:53	16.1 MB
<kuid:346926:12966>	#346926	traincar	12UF-U525-08-B	3.2	25.10.2021 20:25:26	16.2 MB
<kuid:346926:12967>	#346926	traincar	12UF-U525-08-A	3.2	4.11.2021 11:42:44	16.8 MB