<kuid:346926:12814> 12UF-U4 Interior

Тип: Кабина
Опубликовано: 2.08.2020 9:40:31
Скачиваний: 105
Размер: 35.7 MB

Скачать

config.txt:

script                                  "r.gs"
class                                   "r"
kuid                                    <kuid:346926:12814>
kind                                    "interior"
cabin-visible-from-outside              0
outside-visible-from-cabin              0
cameralist
{
  camera0                               0.141,0.145,0.531,-0.008,-0.287
}
cameradefault                           0
mesh-table
{
  default
  {
    mesh                                "main.im"
    auto-create                         1
  }
  horn
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.hupe"
    mesh                                "horn.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  01
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.01"
    mesh                                "01.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  02
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.02"
    mesh                                "02.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  03
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.03"
    mesh                                "03.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  05
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.05"
    mesh                                "05.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  06
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.06"
    mesh                                "06.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  07
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.07"
    mesh                                "07.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  08
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.08"
    mesh                                "08.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  09
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.09"
    mesh                                "09.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  10
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.10"
    mesh                                "10.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  11
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.11"
    mesh                                "11.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  12
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.12"
    mesh                                "12.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  13
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.13"
    mesh                                "13.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  14
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.14"
    mesh                                "14.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  15
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.15"
    mesh                                "15.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  16
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.16"
    mesh                                "16.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  17
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.17"
    mesh                                "17.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speed.im"
    att                                 "a.speed"
    limits                              0,26
    angles                              0,4.9
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.richtungswender"
    limits                              0,2
    angles                              0.5,3.7
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.nix"
    limits                              0,4
    angles                              0,-2
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    mousespeed                          -0.5
    radius                              0.15
    att-parent                          "default"
  }
  kombimode
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "drehschalter.im"
    att                                 "a.nix"
    limits                              0,1
    angles                              0.1,0
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  pantograph_lever
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.04"
    mesh                                "04.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  kombi_lever
  {
    kind                                "lever"
    mesh                                "kombihebel.im"
    att                                 "a.kombihebel"
    limits                              -16,16
    angles                              -0.8,0.8
    notches                             0,0.025,0.05,0.075,0.1,0.125,0.15,0.175,0.2,0.225,0.25,0.275,0.3,0.325,0.35,0.375,0.5,0.625,0.65,0.675,0.7,0.725,0.75,0.775,0.8,0.825,0.85,0.875,0.9,0.925,0.95,0.975,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
    mousespeed                          0.5
    radius                              0.26
    att-parent                          "default"
    auto-create                         1
  }
  18
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.18"
    mesh                                "18.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  19
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.19"
    mesh                                "19.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.37"
    mesh                                "37.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  20
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.20"
    mesh                                "20.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  21
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.21"
    mesh                                "21.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  22
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.22"
    mesh                                "22.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  23
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.23"
    mesh                                "23.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  24
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.24"
    mesh                                "24.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  25
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.25"
    mesh                                "25.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  26
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.26"
    mesh                                "26.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  27
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.27"
    mesh                                "27.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  28
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.28"
    mesh                                "28.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  29
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.29"
    mesh                                "29.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  30
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.30"
    mesh                                "30.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  31
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.31"
    mesh                                "31.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  dcl
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.32"
    mesh                                "32.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  33
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.33"
    mesh                                "33.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  34
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.34"
    mesh                                "34.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  35
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.35"
    mesh                                "35.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  36
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.36"
    mesh                                "36.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  38
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.38"
    mesh                                "38.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  39
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.39"
    mesh                                "39.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  40
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.40"
    mesh                                "40.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  41
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.41"
    mesh                                "41.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  42
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.42"
    mesh                                "42.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  43
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.43"
    mesh                                "43.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  44
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.44"
    mesh                                "44.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  dopl
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.45"
    mesh                                "45.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  sign
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.46"
    mesh                                "46.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  dopr
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.47"
    mesh                                "47.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
  48
  {
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.48"
    mesh                                "48.im"
    limits                              0,1
    angles                              0.01,0
    notches                             1,0
    notchheight                         2,2
    mousespeed                          4
    radius                              0
    att-parent                          "default"
  }
}
string-table
{
  startmode                             "extended"
  pantomode                             "auto"
  defaultkp                             "on"
  brakes_velocity                       "3.0"
  brakes_velocity_delta                 "0.05"
  helplanguage                          "de"
}
trainz-build                            3.2
category-class                          "ZI"
author                                  "Alexey Gryzin"
username                                "12UF-U4 Interior"
organisation                            "-"
contact-email                           "alterralexey@ya.ru"
contact-website                         "-"
license                                 "Freeware for private use"
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
}

Файлы:

0052.jpg	26.1 kB
0052.texture.txt	27 B
01.im	9.0 kB
02.im	2.3 kB
03.im	2.3 kB
04.im	2.3 kB
05.im	2.3 kB
06.im	2.3 kB
07.im	2.3 kB
08.im	2.3 kB
09.im	2.3 kB
10.im	2.3 kB
11.im	2.3 kB
12.im	2.3 kB
13.im	2.3 kB
14.im	2.3 kB
15.im	2.3 kB
16.im	2.3 kB
17.im	2.3 kB
18.im	2.3 kB
19.im	2.3 kB
20.im	2.3 kB
21.im	2.3 kB
22.im	2.3 kB
23.im	2.3 kB
24.im	2.3 kB
25.im	2.3 kB
26.im	2.3 kB
27.im	2.3 kB
28.im	2.3 kB
29.im	2.3 kB
30.im	2.3 kB
31.im	2.3 kB
32.im	2.3 kB
33.im	2.3 kB
34.im	2.3 kB
35.im	2.3 kB
36.im	2.3 kB
37.im	2.3 kB
38.im	2.3 kB
39.im	2.3 kB
40.im	2.3 kB
41.im	2.3 kB
42.im	2.3 kB
43.im	2.3 kB
44.im	2.3 kB
45.im	2.3 kB
46.im	2.4 kB
47.im	2.3 kB
48.im	2.3 kB
4cab06-4cab06.texture.txt	42 B
bogey u401.jpg	113.8 kB
bogey u401.texture.txt	33 B
bvg.jpg	192.0 kB
bvg.texture.txt	26 B
drehschalter.im	8.2 kB
env_glass.jpg	3.2 kB
env_glass.texture.txt	32 B
horn.im	3.3 kB
kombihebel.im	18.7 kB
main.im	2.2 MB
panto.im	4.6 kB
r.gs	23.5 kB
rwcab03.jpg	7.3 MB
rwcab03.texture.txt	30 B
scheibenwischer-scheibenwischer.texture.txt	65 B
scheibenwischer.jpg	105.9 kB
scheibenwischer.texture.txt	38 B
sound
sound / cabin.txt	119 B
sound / close.wav	367.2 kB
sound / open.wav	220.5 kB
sound / signal.wav	369.0 kB
speed.im	1.4 kB
steklo-steklo.texture.txt	47 B
steklo.jpg	27.7 kB
stromabnehmer-stromabnehmer.texture.txt	61 B
stromabnehmer.jpg	8.8 kB
switch.im	5.6 kB
thumbnail.jpg	92.9 kB
u4 cab 01.jpg	2.3 MB
u4 cab 01.texture.txt	32 B
u4fuehrerstrandtext-u4fuehrerstrandtext.texture.txt	73 B
u4fuehrerstrandtext.tga	1.0 MB
u4tex01.jpg	2.3 MB
u4tex01.texture.txt	30 B
u4tex03.jpg	370.7 kB
u4tex03.texture.txt	30 B
u4texfuerhrerstand2.jpg	1.3 MB
u4texfuerhrerstand2.texture.txt	42 B
u4texfuerhrerstand3.jpg	5.1 MB
u4texfuerhrerstand3.texture.txt	42 B
u4texfuerhrerstand4.jpg	7.4 MB
u4texfuerhrerstand4.texture.txt	42 B
u4texinnen.jpg	7.4 MB
u4texinnen.texture.txt	33 B
u9nied.jpg	69.3 kB
u9nied.texture.txt	29 B
Общий объём файлов:	38.5 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:346926:12814>	interior	12UF-U4 Interior	3.2	2.08.2020 9:40:31	35.7 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:346926:12904:1>	#346926	traincar	12UF-U4-01-A	3.5	25.10.2021 20:33:03	26.6 MB
<kuid2:346926:12905:1>	#346926	traincar	12UF-U4-01-B	3.5	25.10.2021 20:43:53	26.8 MB
<kuid2:346926:12923:1>	#346926	traincar	12UF-U4-03-A	3.5	25.10.2021 20:25:39	26.7 MB
<kuid2:346926:12924:1>	#346926	traincar	12UF-U4-03-B	3.5	4.11.2021 11:41:41	26.9 MB
<kuid2:346926:12925:1>	#346926	traincar	12UF-U4-04-A	3.5	25.10.2021 20:42:27	26.7 MB
<kuid2:346926:12926:1>	#346926	traincar	12UF-U4-04-B	3.5	2.08.2020 10:10:05	26.9 MB
<kuid2:346926:12927:1>	#346926	traincar	12UF-U4-05-A	3.5	25.10.2021 20:39:28	26.7 MB
<kuid2:346926:12928:1>	#346926	traincar	12UF-U4-05-B	3.5	4.11.2021 12:00:03	26.9 MB
<kuid2:346926:12929:1>	#346926	traincar	12UF-U4-06-A	3.5	25.10.2021 20:35:49	26.7 MB
<kuid2:346926:12930:1>	#346926	traincar	12UF-U4-06-B	3.5	4.11.2021 11:52:31	26.9 MB
<kuid2:346926:12931:1>	#346926	traincar	12UF-U4-02-A	3.5	4.11.2021 11:43:38	26.8 MB
<kuid2:346926:12932:1>	#346926	traincar	12UF-U4-02-B	3.5	4.11.2021 11:47:02	27.0 MB
<kuid2:346926:12933:1>	#346926	traincar	12UF-U4-07-A	3.5	25.10.2021 20:39:40	26.7 MB
<kuid2:346926:12934:1>	#346926	traincar	12UF-U4-07-B	3.5	4.11.2021 11:41:53	26.8 MB
<kuid2:346926:12935:1>	#346926	traincar	12UF-U4-08-A	3.5	25.10.2021 20:47:41	26.7 MB
<kuid2:346926:12936:1>	#346926	traincar	12UF-U4-08-B	3.5	4.11.2021 12:00:16	26.8 MB
<kuid2:346926:12937:1>	#346926	traincar	12UF-U4-09-A	3.5	25.10.2021 20:31:51	26.7 MB
<kuid2:346926:12938:1>	#346926	traincar	12UF-U4-09-B	3.5	4.11.2021 11:48:09	26.9 MB
<kuid2:346926:12939:1>	#346926	traincar	12UF-U4-10-A	3.5	25.10.2021 20:49:22	26.6 MB
<kuid2:346926:12940:1>	#346926	traincar	12UF-U4-10-B	3.5	4.11.2021 11:51:11	26.8 MB
<kuid2:346926:12941:1>	#346926	traincar	12UF-U4-Redesign-01-A	3.5	4.11.2021 11:52:06	27.6 MB
<kuid2:346926:12942:1>	#346926	traincar	12UF-U4-Redesign-01-B	3.5	4.11.2021 11:42:44	33.6 MB
<kuid2:346926:12943:1>	#346926	traincar	12UF-U4-11-B	3.5	2.08.2020 11:10:25	27.2 MB
<kuid2:346926:12944:1>	#346926	traincar	12UF-U4-11-A	3.5	4.11.2021 11:52:31	27.0 MB
<kuid2:346926:12956:1>	#346926	traincar	12UF-U4-12-A	3.5	25.10.2021 20:41:44	26.7 MB
<kuid2:346926:12957:1>	#346926	traincar	12UF-U4-12-B	3.5	4.11.2021 11:54:58	26.9 MB
<kuid2:346926:12960:1>	#346926	traincar	12UF-U4-13-B	3.5	4.11.2021 11:38:55	32.9 MB
<kuid2:346926:12961:1>	#346926	traincar	12UF-U4-13-A	3.5	25.10.2021 20:39:28	26.7 MB
<kuid2:346926:12962:1>	#346926	traincar	12UF-U4-14-A	3.5	25.10.2021 20:30:31	26.7 MB
<kuid2:346926:12963:1>	#346926	traincar	12UF-U4-14-B	3.5	4.11.2021 11:56:20	32.9 MB
<kuid2:346926:12968:1>	#346926	traincar	12UF-U4-15-A	3.5	4.11.2021 11:41:41	27.0 MB
<kuid2:346926:12969:1>	#346926	traincar	12UF-U4-15-B	3.5	4.11.2021 11:42:18	33.2 MB