<kuid:329364:1100> QR EMU DT Interior

Тип: Кабина
Опубликовано: 23.07.2020 20:50:04
Скачиваний: 46
Размер: 1.9 MB

Скачать

An interior for WilliamG's QR EMU or QR IMU to replace Auran default (a diesel interior). Taken from public domain photos.
Has working windscreen wiper and line voltmeter, in addition to normal gauges and controls.
Warning.. Has high poly count and large texture files to enhance detail. Since it fills half the screen LOD meshes were not used.

config.txt:

kuid                                    <kuid:329364:1100>
trainz-build                            2.5
category-class                          "AC"
category-region                         "AU"
category-era                            "1990s;2000s"
username                                "QR EMU DT Interior"
kind                                    "interior"
cameradefault                           0
author                                  "Peter Villaume (pev)"
contact-email                           "pevguitars@optusnet.com.au"
license                                 "No restrictions other than acknowledgement of original authorship."
script                                  "qr_emu_dt_cabin.gs"
description                             "An interior for WilliamG's QR EMU or QR IMU to replace Auran default (a diesel interior).  Taken from public domain photos.
Has working windscreen wiper and line voltmeter, in addition to normal gauges and controls.
Warning.. Has high poly count and large texture files to enhance detail. Since it fills half the screen LOD meshes were not used."
mesh-table
{
  default
  {
    mesh                                "interior/emu_cab.im"
    auto-create                         1
  }
  e_stop
  {
    mesh                                "buttons/red_mushroom.im"
    att                                 "a.red_mushroom"
    att-parent                          "default"
    auto-create                         1
  }
  blue_button1
  {
    mesh                                "buttons/blue_button.im"
    att-parent                          "default"
    att                                 "a.blue_button1"
    auto-create                         1
  }
  blue_button2
  {
    mesh                                "buttons/blue_button.im"
    att-parent                          "default"
    att                                 "a.blue_button2"
    auto-create                         1
  }
  blue_button3
  {
    mesh                                "buttons/blue_button.im"
    att-parent                          "default"
    att                                 "a.blue_button3"
    auto-create                         1
  }
  blue_button4
  {
    mesh                                "buttons/blue_button.im"
    att-parent                          "default"
    att                                 "a.blue_button4"
    auto-create                         1
  }
  green_button1
  {
    mesh                                "buttons/green_button.im"
    att-parent                          "default"
    att                                 "a.green_button1"
    auto-create                         1
  }
  breen_button2
  {
    mesh                                "buttons/green_button.im"
    att-parent                          "default"
    att                                 "a.green_button2"
    auto-create                         1
  }
  green_button3
  {
    mesh                                "buttons/green_button.im"
    att-parent                          "default"
    att                                 "a.green_button3"
    auto-create                         1
  }
  green_button4
  {
    mesh                                "buttons/green_button.im"
    att-parent                          "default"
    att                                 "a.green_button4"
    auto-create                         1
  }
  green_button5
  {
    mesh                                "buttons/green_button.im"
    att-parent                          "default"
    att                                 "a.green_button5"
    auto-create                         1
  }
  red_button1
  {
    mesh                                "buttons/red_button.im"
    att-parent                          "default"
    att                                 "a.red_button1"
    auto-create                         1
  }
  red_button2
  {
    mesh                                "buttons/red_button.im"
    att-parent                          "default"
    att                                 "a.red_button2"
    auto-create                         1
  }
  red_button3
  {
    mesh                                "buttons/red_button.im"
    att-parent                          "default"
    att                                 "a.red_button3"
    auto-create                         1
  }
  red_button4
  {
    mesh                                "buttons/red_button.im"
    att-parent                          "default"
    att                                 "a.red_button4"
    auto-create                         1
  }
  red_button5
  {
    mesh                                "buttons/red_button.im"
    att-parent                          "default"
    att                                 "a.red_button5"
    auto-create                         1
  }
  reset_button
  {
    mesh                                "buttons/black_mushroom.im"
    att-parent                          "default"
    att                                 "a.black_mushroom"
    auto-create                         1
  }
  horn_button
  {
    mesh                                "buttons/black_mushroom.im"
    att-parent                          "default"
    att                                 "a.horn_button"
    auto-create                         1
  }
  switch1a
  {
    mesh                                "buttons/switch_nut.im"
    att-parent                          "default"
    att                                 "a.switch1"
    auto-create                         1
  }
  wiper_switch
  {
    kind                                "lever"
    mesh                                "buttons/switch_handle.im"
    att                                 "a.switch1"
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.2
    att-parent                          "default"
    auto-create                         1
  }
  switch2a
  {
    mesh                                "buttons/switch_nut.im"
    att-parent                          "default"
    att                                 "a.switch2"
    auto-create                         1
  }
  2
  {
    kind                                "lever"
    mesh                                "buttons/switch_handle.im"
    att                                 "a.switch2"
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.2
    att-parent                          "default"
    auto-create                         1
  }
  switch3a
  {
    mesh                                "buttons/switch_nut.im"
    att-parent                          "default"
    att                                 "a.switch3"
    auto-create                         1
  }
  3
  {
    kind                                "lever"
    mesh                                "buttons/switch_handle.im"
    att                                 "a.switch3"
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.2
    att-parent                          "default"
    auto-create                         1
  }
  switch4a
  {
    mesh                                "buttons/switch_nut.im"
    att-parent                          "default"
    att                                 "a.switch4"
    auto-create                         1
  }
  4
  {
    kind                                "lever"
    mesh                                "buttons/switch_handle.im"
    att                                 "a.switch4"
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.2
    att-parent                          "default"
    auto-create                         1
  }
  switch5a
  {
    mesh                                "buttons/switch_nut.im"
    att-parent                          "default"
    att                                 "a.switch5"
    auto-create                         1
  }
  5
  {
    kind                                "lever"
    mesh                                "buttons/switch_handle.im"
    att                                 "a.switch5"
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.2
    att-parent                          "default"
    auto-create                         1
  }
  switch6a
  {
    mesh                                "buttons/switch_nut.im"
    att-parent                          "default"
    att                                 "a.switch6"
    auto-create                         1
  }
  6
  {
    kind                                "lever"
    mesh                                "buttons/switch_handle.im"
    att                                 "a.switch6"
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.2
    att-parent                          "default"
    auto-create                         1
  }
  switch7a
  {
    mesh                                "buttons/switch_nut.im"
    att-parent                          "default"
    att                                 "a.switch7"
    auto-create                         1
  }
  7
  {
    kind                                "lever"
    mesh                                "buttons/switch_handle.im"
    att                                 "a.switch7"
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.2
    att-parent                          "default"
    auto-create                         1
  }
  switch8a
  {
    mesh                                "buttons/switch_nut.im"
    att-parent                          "default"
    att                                 "a.switch8"
    auto-create                         1
  }
  light_switch
  {
    kind                                "lever"
    mesh                                "buttons/switch_handle.im"
    att                                 "a.switch8"
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.2
    att-parent                          "default"
    auto-create                         1
  }
  wiper
  {
    mesh                                "wiper/wiper.im"
    auto-create                         1
    anim                                "wiper/wiper.kin"
  }
  throttle_base
  {
    mesh                                "levers/throttle_housing.im"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "levers/throttle_lever.im"
    att-parent                          "default"
    att                                 "a.throttle"
    auto-create                         1
    limits                              0,8
    angles                              0,1.8
    notches                             0,0.0625,0.125,0.1875,0.25,0.3125,0.375,0.4375,0.5,0.5625,0.625,0.6875,0.75,0.8125,0.875,0.9275,1
    notchheight                         1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    mousespeed                          -1
  }
  trainbrake_lever
  {
    kind                                "lever"
    mesh                                "levers/brake_lever.im"
    att                                 "a.brake_lever"
    limits                              0,4
    angles                              0,1.55
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    att-parent                          "default"
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    mesh                                "levers/brake_wheel.im"
    att                                 "a.brake_wheel"
    auto-create                         1
    att-parent                          "throttle_base"
    limits                              0,32
    angles                              0,4.5
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,1
    mousespeed                          -1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "levers/reverser_lever.im"
    att                                 "a.reverser"
    limits                              0,2
    angles                              0,1.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "throttle_base"
    auto-create                         1
  }
  press_gauge1
  {
    mesh                                "gauges/press_gauge1.im"
    att-parent                          "default"
    att                                 "a.press_gauge1"
    auto-create                         1
  }
  press_gauge2
  {
    mesh                                "gauges/press_gauge2.im"
    att-parent                          "default"
    att                                 "a.press_gauge2"
    auto-create                         1
  }
  speedo
  {
    mesh                                "gauges/speedo.im"
    att-parent                          "default"
    att                                 "a.speedo"
    auto-create                         1
  }
  voltmeter
  {
    mesh                                "gauges/voltmeter.im"
    att-parent                          "default"
    att                                 "a.voltmeter"
    auto-create                         1
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "gauges/press_needle.im"
    att                                 "a.equaliser"
    limits                              0,1000
    angles                              0,-3.15
    att-parent                          "press_gauge1"
    auto-create                         1
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "gauges/press_needle.im"
    att                                 "a.main_res"
    limits                              0,1000
    angles                              0,3.15
    att-parent                          "press_gauge1"
    auto-create                         1
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "gauges/press_needle.im"
    att                                 "a.brake_cylinder"
    limits                              0,1000
    angles                              0,3.15
    att-parent                          "press_gauge2"
    auto-create                         1
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "gauges/press_needle.im"
    att                                 "a.brake_pipe"
    limits                              0,1000
    angles                              0,-3.15
    att-parent                          "press_gauge2"
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "gauges/speedo_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,33.75
    angles                              0,4.71
    att-parent                          "speedo"
    auto-create                         1
  }
  voltmeter_needle
  {
    kind                                "needle"
    mesh                                "gauges/voltmeter_needle.im"
    att                                 "a.meter_needle"
    limits                              0,900
    angles                              0,1.6
    att-parent                          "voltmeter"
    auto-create                         1
  }
  phone
  {
    mesh                                "phone/phone.im"
    att-parent                          "default"
    att                                 "a.phone"
    auto-create                         1
  }
  aws
  {
    mesh                                "gauges/aws.im"
    att-parent                          "default"
    att                                 "a.aws"
    auto-create                         1
  }
  buzzer
  {
    mesh                                "gauges/buzzer.im"
    att-parent                          "default"
    att                                 "a.buzzer"
    auto-create                         1
  }
}
cameralist
{
  camera0                               0,0.5,0,0,0
  camera1                               -0.9,0.6,0,0,0
  camera2                               0.9,0.6,0,0,0
}
kuid-table
{
}
thumbnails
{
  0
  {
    image                               "qr_emu_cab.jpg"
    width                               240
    height                              180
  }
}

Файлы:

buttons
buttons / black_mushroom.im	9.6 kB
buttons / black_mushroom.texture.txt	37 B
buttons / black_mushroom.tga	24.5 kB
buttons / blue_button.im	4.3 kB
buttons / blue_button.texture.txt	34 B
buttons / blue_button.tga	32.0 kB
buttons / env_metal.bmp	48.1 kB
buttons / env_metal.texture.txt	32 B
buttons / green_button.im	4.3 kB
buttons / green_button.texture.txt	35 B
buttons / green_button.tga	32.5 kB
buttons / red_button.im	4.3 kB
buttons / red_button.texture.txt	33 B
buttons / red_button.tga	32.0 kB
buttons / red_mushroom.im	9.6 kB
buttons / red_mushroom.texture.txt	35 B
buttons / red_mushroom.tga	32.0 kB
buttons / steel.texture.txt	28 B
buttons / steel.tga	3.5 kB
buttons / switch_handle.im	5.1 kB
buttons / switch_nut.im	1.7 kB
buttons / switch_top.texture.txt	33 B
buttons / switch_top.tga	48.5 kB
gauges
gauges / aws.im	508 B
gauges / aws1.texture.txt	43 B
gauges / aws1.tga	256.5 kB
gauges / buzzer.im	2.4 kB
gauges / buzzer.texture.txt	29 B
gauges / buzzer.tga	192.5 kB
gauges / press_gauge1.im	668 B
gauges / press_gauge1.texture.txt	59 B
gauges / press_gauge1.tga	1.0 MB
gauges / press_gauge2.im	672 B
gauges / press_gauge2.texture.txt	59 B
gauges / press_gauge2.tga	1.0 MB
gauges / press_needle.im	820 B
gauges / speedo.im	596 B
gauges / speedo.texture.txt	47 B
gauges / speedo.tga	1.0 MB
gauges / speedo_needle.im	820 B
gauges / voltmeter.im	604 B
gauges / voltmeter_needle.im	624 B
gauges / volt_meter.texture.txt	55 B
gauges / volt_meter.tga	1.0 MB
gauges / white.texture.txt	28 B
gauges / white.tga	3.5 kB
interior
interior / black.texture.txt	28 B
interior / black.tga	12.5 kB
interior / checkerplate.texture.txt	35 B
interior / checkerplate.tga	12.0 kB
interior / controller_top.texture.txt	37 B
interior / controller_top.tga	32.0 kB
interior / controlpanel.texture.txt	35 B
interior / controlpanel.tga	3.0 MB
interior / desk.bmp	192.1 kB
interior / desk.texture.txt	27 B
interior / emu_cab.im	98.4 kB
interior / env_metal.bmp	48.1 kB
interior / env_metal.texture.txt	32 B
interior / interior1.texture.txt	32 B
interior / interior1.tga	1.0 MB
interior / interior2.texture.txt	32 B
interior / interior2.tga	1.0 MB
interior / press_panel.texture.txt	34 B
interior / press_panel.tga	384.5 kB
interior / seat_backrest_top.texture.txt	40 B
interior / seat_backrest_top.tga	4.0 kB
interior / seat_front.texture.txt	33 B
interior / seat_front.tga	16.0 kB
interior / seat_rear.texture.txt	32 B
interior / seat_rear.tga	16.0 kB
interior / seat_top.texture.txt	31 B
interior / seat_top.tga	16.0 kB
interior / steel.texture.txt	28 B
interior / steel.tga	3.5 kB
interior / tt_panel.texture.txt	31 B
interior / tt_panel.tga	384.5 kB
interior / white.texture.txt	28 B
interior / white.tga	16.0 kB
interior / windows.texture.txt	49 B
interior / windows.tga	64.5 kB
interior / windscreen.texture.txt	55 B
interior / windscreen.tga	128.0 kB
levers
levers / black.texture.txt	28 B
levers / black.tga	12.5 kB
levers / brake_lever.im	5.4 kB
levers / brake_wheel.im	3.2 kB
levers / brake_wheel.texture.txt	34 B
levers / brake_wheel.tga	192.5 kB
levers / env_metal.bmp	48.1 kB
levers / env_metal.texture.txt	32 B
levers / reverser_lever.im	3.6 kB
levers / reverser_top.texture.txt	35 B
levers / reverser_top.tga	32.5 kB
levers / throttle_housing.im	10.9 kB
levers / throttle_housing.texture.txt	39 B
levers / throttle_housing.tga	768.5 kB
levers / throttle_lever.im	15.2 kB
levers / throttle_lever.texture.txt	37 B
levers / throttle_lever.tga	96.5 kB
phone
phone / phone.im	6.1 kB
phone / phone.texture.txt	28 B
phone / phone.tga	4.5 kB
phone / phone_box.texture.txt	32 B
phone / phone_box.tga	2.5 kB
phone / phone_cord.texture.txt	55 B
phone / phone_cord.tga	8.5 kB
phone / phone_top.texture.txt	32 B
phone / phone_top.tga	4.5 kB
qr_emu_cab.jpg	11.9 kB
qr_emu_dt_cabin.gs	2.5 kB
wiper
wiper / wiper.im	6.4 kB
wiper / wiper.kin	8.2 kB
wiper / wiper.texture.txt	28 B
wiper / wiper.tga	384.5 kB
Общий объём файлов:	12.7 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:329364:1100>	interior	QR EMU DT Interior	2.5	23.07.2020 20:50:04	1.9 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет