<kuid:211305:7000002> ew51int

Тип: Кабина
Опубликовано: 14.06.2020 14:04:46
Скачиваний: 15
Размер: 2.9 MB

Скачать

config.txt:

kuid                                    <kuid:211305:7000002>
script                                  "ew58cab"
class                                   "EW58Cabin"
category-class                          "ZI"
category-region-0                       "PL"
category-era-0                          "1930s"
category-era-1                          "1940s"
category-era-2                          "1950s"
category-era-3                          "1960's"
trainz-build                            2
camera                                  -0.864,0.578,0.982,0,0
cameralist
{
  camera0                               -0.764,0.578,0.982,0,0
  camera1                               -0.864,0.9,0.982,0,0
  camera2                               -0.058,0.33,1.286,-0.461,-0.778
  camera3                               -0.864,4.5,0.982,0,0
}
cameradefault                           0
mesh-table
{
  default
  {
    mesh                                "int_58.im"
    auto-create                         1
  }
  leftdoor
  {
    mesh                                "left_door.im"
    anim                                "anim_l.kin"
    auto-create                         1
    att                                 "a.doors"
    att-parent                          "default"
  }
  rightdoor
  {
    mesh                                "right_door.im"
    anim                                "anim_r.kin"
    auto-create                         1
    att                                 "a.doors"
    att-parent                          "default"
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "nast.im"
    att                                 "a.nast"
    limits                              0,8
    angles                              -0.785,0.785
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.2
    auto-create                         1
    att-parent                          "default"
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    mesh                                "ham.im"
    att                                 "a.ham"
    limits                              0,4
    angles                              0,-3.4
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              0.15
    auto-create                         1
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "nawr.im"
    att                                 "a.nawr"
    limits                              0,2
    angles                              -0.29,0.29
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.16
    auto-create                         1
    att-parent                          "default"
  }
  horn
  {
    kind                                "lever"
    att                                 "a.horn"
    mesh                                "wyl.im"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.light"
    mesh                                "wyl.im"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    att-parent                          "default"
  }
  pantograf_t
  {
    kind                                "lever"
    mesh                                "wyl.im"
    att                                 "a.pant1"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    att-parent                          "default"
  }
  pantograf_p
  {
    kind                                "lever"
    mesh                                "wyl.im"
    att                                 "a.pant0"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "wsk_predk.im"
    att                                 "a.wsk_predk"
    limits                              0,36.973999
    auto-create                         1
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "wskaz.im"
    att                                 "a.w01"
    limits                              0,500
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "wskaz.im"
    att                                 "a.w02"
    limits                              0,500
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "wskaz.im"
    att                                 "a.w03"
    limits                              0,500
    auto-create                         1
    att-parent                          "default"
  }
  drzwi_prawe
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "wyl.im"
    att                                 "a.drzwi_p"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  drzwi_lewe
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "wyl.im"
    att                                 "a.drzwi_l"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  sygnal
  {
    kind                                "lever"
    mesh                                "wyl.im"
    att                                 "a.brzeczek"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    att-parent                          "default"
  }
}
asset-filename                          "int_58"
kind                                    "interior"
username                                "ew51int"
folder-icon                             "13"
author                                  "Thalys"
organisation                            "GWTTeam"
contact-email                           "acatus@wp.pl"
contact-website                         "http://thalys.pl"
license                                 ""

Файлы:

amper.im	746 B
anim_l.kin	3.2 kB
anim_r.kin	3.2 kB
cab.texture.txt	26 B
cab.tga	768.0 kB
door.wav	4.5 kB
drzwi.texture.txt	28 B
drzwi.tga	32.0 kB
drzwi_male-drzwi_male.texture.txt	55 B
drzwi_male.tga	32.0 kB
ew58cab.gse	1.0 kB
ham.im	17.7 kB
inne.texture.txt	27 B
inne.tga	192.0 kB
int_58.im	327.0 kB
left_door.im	24.2 kB
manometr-manometr.texture.txt	51 B
manometr.tga	64.0 kB
nast.im	6.4 kB
nawr.im	7.8 kB
okna-w-okna-w_a.texture.txt	49 B
okna-w.tga	48.0 kB
okna-w_a.bmp	17.1 kB
okna.tga	64.0 kB
okna_a.bmp	17.1 kB
okna_m-w_a.bmp	17.1 kB
okna_m_a.bmp	17.1 kB
okno-d-okno-d_a.texture.txt	49 B
okno-d.tga	48.0 kB
okno-d_a.bmp	17.1 kB
okno-p-w-okno-p-w_a.texture.txt	53 B
okno-p-w.tga	48.0 kB
okno-p-w_a.bmp	17.1 kB
okno_m-w-okna_m-w_a.texture.txt	53 B
okno_m-w.tga	48.0 kB
podloga.texture.txt	30 B
podloga.tga	16.0 kB
przycisk_ziel-przycisk_ziel-przycisk_ziel-przycisk_ziel.texture.txt	89 B
przycisk_ziel-przycisk_ziel.tga	64.0 kB
pul-pul.texture.txt	41 B
pul.tga	2.0 MB
pulpit.tga	3.0 MB
right_door.im	22.5 kB
sufit.texture.txt	28 B
sufit.tga	96.0 kB
wnetrze.texture.txt	30 B
wnetrze.tga	48.0 kB
wskaz.im	1.2 kB
wsk_predk.im	712 B
wyl.im	1.5 kB
Общий объём файлов:	7.0 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:211305:7000002>	interior	ew51int	2	14.06.2020 14:04:46	2.9 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет