<kuid2:210518:300711:2> URY_Carbonera_Tipple

Тип: Индустрия
Опубликовано: 17.07.2020 19:15:05
Скачиваний: 26
Размер: 678.8 kB

Скачать

This is the interactive coaling facility on the Uintah Railway in Carbonera,
Colorado that takes coal in on any gauge track and outputs it to 3 ft gauge
gons at any of the three chutes. There is insuficient clearance for a loco
to take on coal except at the chute that is not underneath the structure.
In the real world there was no provision to store coal above the chutes.
Empty gons were spotted below and trams dumped directly into them. The same
is true of a loco taking on coal. Trams held about 1 ton each. Any gauge trams
can be used by changing the kuid for the three input tracks to the rail only
track of your choice.
Note: To avoid crashing a session I strongly reccomend adding sections of
invisible track off the ends of the three tracks on top as the to unload
trams are trigger points are very close to the ends of the built in tracks.
EDIT: Corrected a clearence problem.

config.txt:

kuid                                    <kuid2:210518:300711:2>
kind                                    "industry"
trainz-build                            3.7
category-class                          "BB"
height-range                            -10,10
light                                   1
script                                  "oredump"
class                                   "OreDump"
obsolete-table
{
}
mesh-table
{
  default
  {
    mesh                                "Part_1.im"
    auto-create                         1
  }
}
attached-track
{
  in_track1
  {
    track                               <kuid:124060:38194>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track0a"
      1                                 "a.track0b"
    }
  }
  in_track2
  {
    track                               <kuid:124060:38194>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track1a"
      1                                 "a.track1b"
      2                                 "a.track1c"
      3                                 "a.track1d"
      4                                 "a.track1e"
      5                                 "a.track1f"
      6                                 "a.track1g"
      7                                 "a.track1h"
    }
  }
  in_track3
  {
    track                               <kuid:124060:38194>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track2a"
      1                                 "a.track2b"
      2                                 "a.track2c"
      3                                 "a.track2d"
      4                                 "a.track2e"
      5                                 "a.track2f"
      6                                 "a.track2g"
      7                                 "a.track2h"
    }
  }
  out_track1
  {
    track                               <kuid:124060:38190>
    useadjoiningtracktype               1
    vertices
    {
      0                                 "a.track3a"
      1                                 "a.track3b"
    }
  }
  out_track2
  {
    track                               <kuid:124060:38190>
    useadjoiningtracktype               1
    vertices
    {
      0                                 "a.track4a"
      1                                 "a.track4b"
    }
  }
}
attached-trigger
{
  in_trig1
  {
    att                                 "a.trig0"
    radius                              2
  }
  in_trig2
  {
    att                                 "a.trig1"
    radius                              2
  }
  in_trig3
  {
    att                                 "a.trig2"
    radius                              2
  }
  out_trig1
  {
    att                                 "a.trig4"
    radius                              2
  }
  out_trig2
  {
    att                                 "a.trig5"
    radius                              2
  }
  out_trig3
  {
    att                                 "a.trig6"
    radius                              2
  }
}
queues
{
  prod_q
  {
    size                                1000000
    initial-count                       500000
    product-kuid                        <kuid:44179:60013>
    allowed-products
    {
      0                                 <kuid:44179:60013>
    }
  }
}
processes
{
  prod_tipple
  {
    start-enabled                       1
    duration                            30
    outputs
    {
      0
      {
        amount                          250
        queue                           "prod_q"
      }
    }
    inputs
    {
      0
      {
        amount                          250
        queue                           "prod_q"
      }
    }
  }
}
smoke0
{
  attachment                            "a.smoke0"
  mode                                  "time"
  color                                 25,25,25,220
  accel                                 0.5,0.3,0
  rate                                  8
  velocity                              3
  lifetime                              10
  minsize                               2
  maxsize                               10
  enabled                               0
}
smoke1
{
  attachment                            "a.smoke1"
  mode                                  "time"
  color                                 25,25,25,220
  accel                                 0.5,0.3,0
  rate                                  8
  velocity                              3
  lifetime                              10
  minsize                               2
  maxsize                               10
  enabled                               0
}
smoke2
{
  attachment                            "a.smoke2"
  mode                                  "time"
  color                                 25,25,25,220
  accel                                 0.5,0.3,0
  rate                                  8
  velocity                              3
  lifetime                              10
  minsize                               2
  maxsize                               10
  enabled                               0
}
thumbnails
{
  0
  {
    image                               "URY Carbonera Tipple.jpg"
    width                               240
    height                              180
  }
}
description                             "This is the interactive coaling facility on the Uintah Railway in Carbonera,
		 Colorado that takes coal in on any gauge track and outputs it to 3 ft gauge
		 gons at any of the three chutes. There is insuficient clearance for a loco
		 to take on coal except at the chute that is not underneath the structure.
		 In the real world there was no provision to store coal above the chutes.
		 Empty gons were spotted below and trams dumped directly into them. The same
		 is true of a loco taking on coal. Trams held about 1 ton each. Any gauge trams
		 can be used by changing the kuid for the three input tracks to the rail only
		 track of your choice.
		 Note: To avoid crashing a session I strongly reccomend adding sections of
		 invisible track off the ends of the three tracks on top as the to unload
		 trams are trigger points are very close to the ends of the built in tracks.
		 EDIT: Corrected a clearence problem."
username                                "URY_Carbonera_Tipple"
author                                  "Benjamin R. Dorsey (bendorsey)"
contact-email                           "bendorsey1@att.net"
license                                 "This item is released free of charge for yourenjoyment. You may use,
		 redistribute,and re-skin the model as long as you do not do so for profit
		 or include it in any package for profit."
kuid-table
{
  0                                     <kuid:124060:38194>
  1                                     <kuid:124060:38190>
  prod                                  <kuid:44179:60013>
}

Файлы:

black.texture.txt	28 B
concrete3.texture.txt	32 B
oredump.gs	6.9 kB
ury carbonera tipple.jpg	7.8 kB
wood2.texture.txt	28 B
black.bmp	246 B
ballast7.texture.txt	31 B
wood2.jpg	23.2 kB
coal_load.wav	104.1 kB
concrete3.jpg	41.6 kB
ballast7.jpg	407.1 kB
part_1.im	474.4 kB
Общий объём файлов:	1.0 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:210518:300711:2>	industry	URY_Carbonera_Tipple	3.7	17.07.2020 19:15:05	678.8 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:44179:60013:4>	#44179	product	Уголь	3.7	30.10.2020 22:44:39	1.5 MB
<kuid:124060:38190>	#124060	track	NG36 Track 56lb grey milled	3.5	12.06.2020 23:26:03	2.8 MB
<kuid:124060:38194>	#124060	track	NG36 Track 56lb, rail only	3.5	12.06.2020 19:22:20	832.5 kB
Всего связей: 3, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет