<kuid:204322:55150> 150_interier

Тип: Кабина
Опубликовано: 14.06.2020 16:32:06
Скачиваний: 70
Размер: 161.3 kB
Скачать

config.txt:
kuid                                    <kuid:204322:55150>
alias                                   <kuid:61599:55151>
mesh                                    "151_interior.pm"
category-class                          "ZI"
category-region-0                       "CZ"
category-era-0                          "1980s"
category-era-1                          "1990s"
category-era-2                          "2000s"
camera                                  -0.499,0.694,0.473
cameralist
{
  camera0                               -1.032,0.906,0.644,0.7,-0.25
  camera1                               1.032,0.906,0.644,-0.7,-0.25
  camera2                               -0.499,0.694,0.473,0.026,-0.039
}
cameradefault                           2
attachment
{
  pantograph_lever
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.panto"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
  }
  horn
  {
    kind                                "pullrope"
    mesh                                "horn.pm"
    att                                 "a.horn"
    limits                              0,1
    angles                              0.008,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
  }
  independantbrake_lever
  {
    kind                                "lever"
    mesh                                "lev_valve.pm"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              0,1.5
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,1
    radius                              0.15
    mousespeed                          -1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "lev_revers.pm"
    att                                 "a.reverser"
    limits                              0,2
    angles                              -0.45,0.45
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "lev_revers2.pm"
    att                                 "a.throttle"
    limits                              0,8
    angles                              -0.5,0.7
    notches                             0,0.0303,0.0606,0.0909,0.1212,0.1515,0.1818,0.2121,0.2424,0.2727,0.303,0.3333,0.3636,0.3939,0.4242,0.4545,0.4848,0.5151,0.5454,0.5757,0.606,0.6363,0.6666,0.6969,0.7272,0.7575,0.7878,0.8181,0.8484,0.8787,0.909,0.9393,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
    radius                              0.1
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    mesh                                "lev_trainbrake.pm"
    att                                 "a.train_brake_lever"
    limits                              0,4
    angles                              0.9,-0.4
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    radius                              0.1
    mousespeed                          -1
  }
  electrodynamicbrake_lever
  {
    kind                                "lever"
    mesh                                "lev_dynbrake.pm"
    att                                 "a.dynbrake"
    limits                              0,2
    angles                              0,0.94
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
  }
  light_switch
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.light"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
  }
  aux.compr.__compr.1
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch0"
    limits                              0,2
    angles                              -0.8,2.4
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.1
  }
  compressor_2
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch1"
    limits                              0,2
    angles                              -0.8,2.4
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.1
  }
  ventilators
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch2"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
  }
  sheet_brake
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch4"
    limits                              0,10
    angles                              -0.8,5
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         3,3,3,3,3,3,3,3,3,3,3
    radius                              0.1
  }
  control
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch5"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
  }
  coupling
  {
    kind                                "lever"
    mesh                                "lev_switch2.pm"
    att                                 "a.switch10"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
  }
  cab_light
  {
    kind                                "lever"
    mesh                                "lev_switch2.pm"
    att                                 "a.switch11"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
  }
  measure_instruments_light
  {
    kind                                "lever"
    mesh                                "lev_switch2.pm"
    att                                 "a.switch12"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
  }
  flashing_light_front-right
  {
    kind                                "lever"
    mesh                                "lev_switch2.pm"
    att                                 "a.switch13"
    limits                              0,2
    angles                              -0.8,2.4
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.1
  }
  flashing_light_front-left
  {
    kind                                "lever"
    mesh                                "lev_switch2.pm"
    att                                 "a.switch14"
    limits                              0,2
    angles                              -0.8,2.4
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.1
  }
  flashing_light_rear-right
  {
    kind                                "lever"
    mesh                                "lev_switch2.pm"
    att                                 "a.switch15"
    limits                              0,2
    angles                              -0.8,2.4
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.1
  }
  flashing_light_rear-left
  {
    kind                                "lever"
    mesh                                "lev_switch2.pm"
    att                                 "a.switch16"
    limits                              0,2
    angles                              -0.8,2.4
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.1
  }
  security_switch1
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch17"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
  }
  security_switch2
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch18"
    limits                              0,2
    angles                              -0.8,2.4
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.1
  }
  security_switch3
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch19"
    limits                              0,3
    angles                              -0.8,4,6
    notches                             0,0.12,0.25,1
    notchheight                         3,3,3,3
    radius                              0.1
  }
  security_switch4
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch20"
    limits                              0,2
    angles                              -0.8,2.4
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.1
  }
  security_switch5
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch21"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
  }
  security_switch6
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch22"
    limits                              0,3
    angles                              -0.8,4
    notches                             0,0.33,0.66,1
    notchheight                         3,3,3,3
    radius                              0.1
  }
  security_switch7
  {
    kind                                "lever"
    mesh                                "lev_switch.pm"
    att                                 "a.switch23"
    limits                              0,2
    angles                              -0.8,2.4
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.1
  }
  frequency_vz
  {
    kind                                "lever"
    mesh                                "lev_switch2.pm"
    att                                 "a.switch25"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
  }
  heating
  {
    kind                                "lever"
    mesh                                "lev_heating.pm"
    att                                 "a.switch24"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "ned_white.pm"
    att                                 "a.res_pressure_needle"
    limits                              0,1000
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "ned_red.pm"
    att                                 "a.res_pressure_needle"
    limits                              0,1000
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "ned_white2.pm"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "ned_red.pm"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "ned_amp.pm"
    att                                 "a.ampmeter_motor1"
    limits                              0,500
    angles                              0,2.8
  }
  ampmeter2_needle
  {
    kind                                "needle"
    mesh                                "ned_amp.pm"
    att                                 "a.ampmeter_motor2"
    limits                              0,500
    angles                              0,2.8
  }
  voltmeter_line
  {
    kind                                "needle"
    mesh                                "ned_amp.pm"
    att                                 "a.voltmeter_line"
    limits                              0,125
    value                               175
    angles                              0,1
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "ned_speed.pm"
    att                                 "a.speedo_needle2"
    limits                              0,66
  }
  ampmeter_brake
  {
    kind                                "needle"
    mesh                                "ned_amp.pm"
    att                                 "a.ampmeter_brake"
    limits                              0,1000
    value                               200
    angles                              0,0.6
  }
  rol
  {
    kind                                "pullrope"
    mesh                                "lev_rol151.pm"
    att                                 "a.rol01"
    limits                              0,1
    angles                              0,-0.42
  }
  rol2
  {
    kind                                "pullrope"
    mesh                                "lev_rol151.pm"
    att                                 "a.rol02"
    limits                              0,1
    angles                              0,-0.42
  }
  windows
  {
    mesh                                "windows151.pm"
    att                                 
    opacity                             0.2
  }
}
asset-filename                          "150_interier"
kind                                    "interior"
username                                "150_interier"
folder-icon                             "3"
author                                  "Ales Kuna"
organisation                            ""
contact-email                           "ales.kuna@rychlej.net"
contact-website                         ""
license                                 "free for non comercial use only"
Файлы:
151_cabin_zkl.bmp	768.1 kB
151_cabin_zkl.texture.txt	36 B
151_cab_numbk.bmp	9.1 kB
Общий объём файлов:	777.1 kB
Версии элемента:
kuid	kind	name	build	date	size
<kuid:204322:55150>	interior	150_interier	0	14.06.2020 16:32:06	161.3 kB
Зависимости:
kuid	author	kind	name	build	date	size
Нет
Зависимые элементы:
kuid	author	kind	name	build	date	size
Нет