<kuid:200439:100458> Interior D1-548

Тип: Кабина
Опубликовано: 28.04.2023 1:12:23
Скачиваний: 83
Размер: 6.8 MB

Скачать

A D1 russian passenger diesel-locomotive cab interior. Version 1

config.txt:

kuid                                    <kuid:200439:100458>
username                                "Interior D1-548"
category-region                         "RU;SU;UA"
category-era                            "2010s;2011s"
kind                                    "interior"
cameradefault                           0
author                                  "Razor_87"
description                             "A D1 russian passenger diesel-locomotive cab interior. Version 1"
category-class                          "ZX"
trainz-build                            3.5
cameralist
{
  camera0                               -0.758,0.5,0.38,0,-0.1
  camera1                               0.758,0.6,0.759,0.05,-0.35
  camera2                               -1.256,0.574,0.7,-0.5,-0.38
  camera3                               0.685,0.504,0.515,-0.96,0.18
  camera4                               -0.499,0.694,0.473,0.026,-0.039
  camera5                               0,0.6,0.75,-0.1,-0.16
  camera6                               0.685,0.504,0.461,-0.013,-0.079
}
mesh-table
{
  default
  {
    mesh                                "d1cab.im"
    auto-create                         1
  }
  throttle_lever
  {
    mesh                                "throttle.im"
    kind                                "lever"
    att                                 "a.throtte"
    auto-create                         1
    angles                              0,1.92
    limits                              0,8
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,1,1,1,1,1,1,1,1
    att-parent                          "default"
    test-collisions                     1
    radius                              0.2
    mousespeed                          -0.4
  }
  trainbrakelap_lever
  {
    mesh                                "trainbrake.IM"
    att                                 "a.trainbrake"
    auto-create                         1
    kind                                "lever"
    limits                              0,4
    angles                              -0.9,-3.1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    att-parent                          "default"
    radius                              0.2
    mousespeed                          -0.4
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedo_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,48
    att-parent                          "default"
  }
  sand_lever
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.sandingpedal"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
    tooltip-text                        "Песок"
  }
  switch1
  {
    mesh                                "Kreslo.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch01"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch2
  {
    mesh                                "EPK_Key.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch02"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
    tooltip-text                        "ЭПК"
  }
  switch3
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch03"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
    tooltip-text                        "Компрессор ВКЛ/ВЫКЛ"
  }
  switch4
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch04"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch5
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch05"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  light_switch
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch06"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch7
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch07"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch8
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch08"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch9
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch09"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch10
  {
    mesh                                "Lever3.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch10"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch11
  {
    mesh                                "Lever3.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch11"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch12
  {
    mesh                                "Lever2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch12"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch13
  {
    mesh                                "Lever3.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch13"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch14
  {
    mesh                                "Lever2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch14"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch15
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch15"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch16
  {
    mesh                                "Lever2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch16"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch17
  {
    mesh                                "Lever2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch17"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch18
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch18"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch19
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch19"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch20
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch20"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  switch21
  {
    mesh                                "Lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch21"
    angles                              -0.55,0.55
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  rol
  {
    mesh                                "Window_left.IM"
    limits                              0,1
    angles                              0,-0.42
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "needle_black.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.brakecylinder_needle"
    limits                              0,1600
    angles                              0.1,6
    att-parent                          "default"
  }
  bplocomain_needle
  {
    mesh                                "needle_black.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_needle"
    limits                              0,1600
    angles                              0,6
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    mesh                                "needle_black.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakepipe_needle"
    limits                              0,1600
    angles                              0.1,5.5
    att-parent                          "default"
  }
  bptrainbrakepipe2_needle
  {
    mesh                                "needle_black.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakepipe_needle1"
    limits                              0,1600
    angles                              0.1,8
    att-parent                          "default"
  }
  bptrainbrakecylinder2_needle
  {
    mesh                                "needle_black.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.brakecylinder_needle1"
    limits                              0,1600
    angles                              0.3,0
    att-parent                          "default"
  }
  bploco_equaliser
  {
    mesh                                "needle_black.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.equalizer_needle"
    limits                              0,1600
    angles                              -2.6,2.6
    att-parent                          "default"
  }
  bplocomain2_needle
  {
    mesh                                "needle_black.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_needle1"
    limits                              0,1600
    angles                              0,6
    att-parent                          "default"
  }
  voltmeter1_needle
  {
    mesh                                "Volt_needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.napryagenie"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  voltmeter2_needle
  {
    mesh                                "Volt_needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.set"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  voltmeter3_needle
  {
    mesh                                "Volt_needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.set1"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "reverser_lever.IM"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.55,-0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  bptrainbrakepipe3_needle
  {
    mesh                                "needle_black.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakepipe_needle3"
    limits                              0,1600
    angles                              0.1,8
    att-parent                          "default"
  }
  bptrainbrakepipe4_needle
  {
    mesh                                "needle_black.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakepipe_needle4"
    limits                              0,1600
    angles                              0.1,8
    att-parent                          "default"
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.bmp"
    width                               240
    height                              180
  }
}
kuid-table
{
}

Файлы:

black.texture.txt	28 B
black.jpg	3.4 kB
d1cab1.texture.txt	29 B
bag.jpg	41.2 kB
d1cab.texture.txt	28 B
bag.texture.txt	26 B
d1cab1.jpg	98.4 kB
epk_key.im	14.2 kB
gurnal.texture.txt	29 B
kran.jpg	21.2 kB
kran1.texture.txt	27 B
kran2.jpg	83.8 kB
kran2.texture.txt	28 B
kreslo.jpg	284.1 kB
kran.texture.txt	27 B
kran1.jpg	2.9 kB
d1cab.jpg	138.1 kB
kreslo.im	8.3 kB
epk.jpg	17.5 kB
gurnal.jpg	73.8 kB
lamp.jpg	6.9 kB
lever2.im	9.3 kB
kreslo.texture.txt	29 B
lever3.im	18.2 kB
manometers.jpg	14.5 kB
locobrake.texture.txt	32 B
lever.im	10.9 kB
lamp.texture.txt	27 B
manometers.texture.txt	33 B
locobrake.jpg	95.0 kB
needle_black.im	6.8 kB
panel.jpg	18.3 kB
pol.texture.txt	26 B
pult.jpg	62.3 kB
pol.jpg	125.6 kB
pult.texture.txt	26 B
pult2.jpg	16.9 kB
pult2.texture.txt	28 B
skorostimer.texture.txt	34 B
panel.texture.txt	28 B
skorostimer2.jpg	7.1 kB
reverser_lever.im	13.6 kB
skorostimer.jpg	39.1 kB
reflekt1.texture.txt	31 B
reflekt.texture.txt	30 B
reflekt1.jpg	78.7 kB
d1cab.im	2.3 MB
reflekt.jpg	122.7 kB
skorostimer2.texture.txt	35 B
sound
sound / cabin.txt	1.1 kB
sound / throttle.wav	5.7 kB
sound / brake1.wav	443.5 kB
sound / switch.wav	7.9 kB
sound / sand.wav	73.9 kB
sound / compressor.wav	1.7 MB
sound / epk.wav	4.7 MB
steklo1.jpg	13.3 kB
stucco.jpg	123.8 kB
speedo_needle.im	10.2 kB
steklo1.texture.txt	30 B
stucco.texture.txt	29 B
volt_needle.im	8.9 kB
trainbrake.im	26.0 kB
throttle.im	24.3 kB
window_left.im	31.0 kB
zerkalo.texture.txt	30 B
zerkalo.jpg	13.2 kB
wite_lamp.jpg	5.5 kB
wite_lamp.texture.txt	32 B
thumbnail.bmp	126.6 kB
Общий объём файлов:	11.0 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:200439:100458>	interior	Interior D1-548	3.5	28.04.2023 1:12:23	6.8 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:200439:100457>	#200439	traincar	D1-548 Golova	3.5	28.04.2023 1:12:23	4.0 MB
<kuid:569539:7801>	ZUBIKK	traincar	D1-780 Golova	3.5	20.06.2023 21:43:34	4.0 MB