<kuid2:178987:4004:1> ICM_cabine

Тип: Кабина
Опубликовано: 13.07.2020 16:53:28
Скачиваний: 24
Размер: 438.2 kB

Скачать

config.txt:

kuid                                    <kuid2:178987:4004:1>
username                                "ICM_cabine"
kind                                    "interior"
category-class                          "ZI"
author                                  "Stevado"
organisation                            "Stevado Design"
contact-email                           "steven@stevado.nl"
contact-website                         "www.stevado.nl"
license                                 "Veel plezier ermee."
category-region                         "NL"
category-era                            "1990s;2000s"
cameradefault                           0
trainz-build                            2.7
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
mesh-table
{
  interior_main
  {
    mesh                                "ICM_cabine.im"
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "Snelheidsmeter.im"
    att                                 "a.Snelheidsmeter0"
    limits                              0,50
    angles                              0,0.245
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "Ampmeter.im"
    att                                 "a.Ampmeter0"
    limits                              0,1000
    angles                              -0.5,2.7
    att-parent                          "default"
  }
  pantograph_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Ampmeter.im"
    att                                 "a.Pantograaf0"
    limits                              0,1
    angles                              0.6,2.2
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "Drukmeter_needle.im"
    att                                 "a.Drukmeter0"
    limits                              0,1000
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "Drukmeter_needle_2.im"
    att                                 "a.Drukmeter01"
    limits                              0,1000
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Rem.im"
    att                                 "a.Rem0"
    limits                              0,4
    angles                              0,-2.4
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              0.15
    att-parent                          "default"
  }
  handrem
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Rem_2.im"
    att                                 "a.Rem_2"
    limits                              0,4
    angles                              0,-2.4
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,1
    radius                              0.15
    att-parent                          "default"
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Omkering.im"
    att                                 "a.Omkering_2"
    limits                              0,2
    angles                              0,-2
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.35
    att-parent                          "default"
  }
  throttle_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Gashendel.im"
    att                                 "a.Gashendel0"
    limits                              0,8
    angles                              0,2.7
    notches                             0,0.125,0.25,0.375,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Omkering.im"
    att                                 "a.Omkering0"
    limits                              0,2
    angles                              -2,-0.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Licht.im"
    att                                 "a.Licht0"
    limits                              0,1
    angles                              0.65,-0.4
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  frontsein_links
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar0"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  frontsein_midden
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar01"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  frontsein_rechts
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar02"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  verlichting_cabine
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar03"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  verlichting_trein
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar04"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  snelschakelen
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar05"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  verlichting_meters
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar06"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  ruit_verwarming
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar07"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  verwarming_tyfoon
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar08"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  pantograaf_treinstel_1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar09"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  pantograaf_treinstel_2
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar10"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  pantograaf_treinstel_3
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar11"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  pantograaf_treinstel_4
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar12"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  hoofdverwarming
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar13"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  stroomafnemer_pomp
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar14"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  compressor_automatisch
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar15"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  motorgen
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar16"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  voet_verwarming
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Schakelaar.im"
    att                                 "a.Schakelaar17"
    limits                              0,1
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    att-parent                          "default"
  }
  default
  {
    mesh                                "ICM_cabine.im"
    auto-create                         1
  }
}
cameralist
{
  camera0                               0,0.2,-0.05,0,0
}
kuid-table
{
}

Файлы:

ampmeter.im	1.7 kB
diversen.texture.txt	31 B
diversen.tga	397.5 kB
drukmeter_needle.im	1.9 kB
drukmeter_needle_2.im	1.9 kB
gashendel.im	16.8 kB
icm_cabine.im	46.0 kB
koploper.texture.txt	31 B
koploper.tga	3.0 MB
licht.im	1.3 kB
needle.im	1.5 kB
omkering.im	16.8 kB
rem.im	13.1 kB
rem_2.im	13.1 kB
schakelaar.im	752 B
snelheidsmeter.im	688 B
telefoonsnoer-telefoonsnoer_alpha.texture.txt	67 B
telefoonsnoer.tga	24.8 kB
telefoonsnoer_alpha.bmp	5.1 kB
thumbnail.jpg	29.8 kB
Общий объём файлов:	3.6 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:178987:4004:3>	interior	NS_ICM_4055-1_cabine	3.7	20.04.2023 1:03:13	418.5 kB
<kuid2:178987:4004:1>	interior	ICM_cabine	2.7	13.07.2020 16:53:28	438.2 kB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:156269:40452>	#156269	traincar	NS ICM_IIIA_Koploper_4045_WK90	2.2	12.01.2021 22:19:24	2.1 MB
<kuid:156269:40454>	#156269	traincar	NS ICM_IIIA_kop_koploper_4045_WK90	2.2	12.01.2021 19:42:23	2.2 MB
<kuid:156269:40512>	#156269	traincar	NS ICM_IIIA_Koploper_4051_Ariane	2.2	15.09.2023 19:56:20	2.1 MB
<kuid:156269:40514>	#156269	traincar	NS ICM_IIIA_kop_koploper_4051_Ariane	2.2	17.01.2021 0:36:52	2.1 MB
<kuid:156269:42242>	#156269	traincar	NS ICM_IVA_Koploper_4224_WK90	2.2	15.09.2023 19:52:21	2.1 MB
<kuid:156269:42244>	#156269	traincar	NS ICM_IVA_kop_Koploper_4224_WK90	2.2	12.01.2021 19:14:32	2.2 MB
<kuid2:178987:4055:1>	#178987	traincar	NS ICM IIIA Koploper	3.5	20.04.2023 12:22:03	2.1 MB
<kuid2:178987:4240:1>	#178987	traincar	NS ICM A NOC-NSF	3.5	12.01.2021 19:18:12	2.8 MB
<kuid2:178987:40551:1>	#178987	traincar	NS ICM IIIA kop Koploper	3.5	12.01.2021 19:16:30	2.2 MB
<kuid2:178987:42401:3>	#178987	traincar	NS ICM A NOC-NSF kop	3.5	15.09.2023 19:59:03	2.9 MB