<kuid:147369:100927> ED2T-0046 kabina

Тип: Кабина
Опубликовано: 25.06.2020 16:54:30
Скачиваний: 66
Размер: 5.5 MB
Скачать

кабина электропоезда ЭД2Т
config.txt:
category-class                          "ZI"
category-region                         "RU"
category-era                            "2000s"
cameralist
{
  camera0                               1.2,0.61,1.5,13,-0.137
  camera1                               0,0.675,1.9,0,-1
  camera2                               0.331,-0.506,1.492,-13.501,-0.122
  camera3                               -0.76,0.58,1.44,0,-0.09
  camera4                               -1.178,0.68,1.6,6.592,-0.194
  camera5                               0.82,0.58,1.5,0,-0.09
  camera6                               0.46,0.42,1.6,-0.02,-0.234
}
cameradefault                           3
mesh-table
{
  default
  {
    mesh                                "kabina.IM"
    auto-create                         1
  }
  pantograph_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.pantograph"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    test-collisions                     1
  }
  pantograph_lever1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_01"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  rb1
  {
    mesh                                "rb.IM"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka_rb2"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          15
  }
  rbp
  {
    mesh                                "rb.IM"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka_rb1"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          15
  }
  pesok1
  {
    mesh                                "knopka_2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pesok_button01"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          15
  }
  switch22
  {
    mesh                                "knopka_3.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pesok_button02"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          15
  }
  switch21
  {
    mesh                                "knopka_3.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button3_01"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          15
  }
  switch40
  {
    mesh                                "knopka_4.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button4_01"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          15
  }
  light_switch
  {
    kind                                "lever"
    mesh                                "krutilka_1.IM"
    att                                 "a.light_switch01"
    auto-create                         1
    limits                              0,1
    angles                              0,4
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          5
  }
  ppt
  {
    kind                                "lever"
    mesh                                "krutilka_2.IM"
    att                                 "a.tumbler_ppt"
    auto-create                         1
    limits                              0,1
    angles                              1,2
    notches                             0,1
    notchheight                         0.001,0.001,0.001
    radius                              0
    mousespeed                          5
  }
  obogrev_vneshn
  {
    kind                                "lever"
    mesh                                "krutilka_1.IM"
    att                                 "a.tumbler_obogrev01"
    auto-create                         1
    limits                              0,1
    angles                              -1,1
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          5
  }
  obogrev_cabin
  {
    kind                                "lever"
    mesh                                "krutilka_3.IM"
    att                                 "a.tumbler_obogrev02"
    auto-create                         1
    limits                              0,1
    angles                              -0.75,1
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          5
  }
  obogrev_maslootd
  {
    kind                                "lever"
    mesh                                "krutilka_3.IM"
    att                                 "a.tumbler_obogrev03"
    auto-create                         1
    limits                              0,1
    angles                              -0.75,1
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          5
  }
  vz
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_09"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  klub_sw
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_10"
    angles                              0.4,1.2
    notches                             0,1
    notchheight                         0,1
  }
  switch_23
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_11"
    angles                              0.3,1.3
    notches                             0,1
    notchheight                         0,1
  }
  switch_24
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_12"
    angles                              1.3,0.3
    notches                             0,1
    notchheight                         0,1
  }
  switch_25
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_13"
    angles                              1.3,0.3
    notches                             0,1
    notchheight                         0,1
  }
  switch_26
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_14"
    angles                              1.3,0.3
    notches                             0,1
    notchheight                         0,1
  }
  switch_27
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_15"
    angles                              1.3,0.3
    notches                             0,1
    notchheight                         0,1
  }
  switch_28
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_16"
    angles                              1.3,0.3
    notches                             0,1
    notchheight                         0,1
  }
  switch_29
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_17"
    angles                              1.3,0.3
    notches                             0,1
    notchheight                         0,1
  }
  va
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_18"
    angles                              0.3,1.3
    notches                             0,1
    notchheight                         0,1
  }
  switch_2
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_02"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  switch_3
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_03"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  switch_4
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_04"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  switch_5
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_05"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  switch_6
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_06"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  switch_7
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_07"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  switch_8
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1.im"
    att                                 "a.switch1_08"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  switch_9
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1a.im"
    att                                 "a.dr_lever"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  switch_10
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_1a.im"
    att                                 "a.dl_lever"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  switch_30
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_05"
    angles                              0.25,-0.25
    notches                             0,1
    notchheight                         1,1
  }
  radio
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.radio"
    angles                              -0.25,0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_31
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_06"
    angles                              0.25,-0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_32
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_07"
    angles                              0.25,-0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_33
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_08"
    angles                              0.25,-0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_34
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_09"
    angles                              0.25,-0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_35
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_10"
    angles                              0.25,-0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_36
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_11"
    angles                              0.25,-0.25
    notches                             0,1
    notchheight                         1,1
  }
  bf_right
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.bf_right"
    angles                              -0.25,0.25
    notches                             0,1
    notchheight                         1,1
  }
  bf_left
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.bf_left"
    angles                              -0.25,0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_37
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_12"
    angles                              0.25,-0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_38
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_13"
    angles                              0.25,-0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_39
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_14"
    angles                              0.25,-0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_15
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.svet_kabin"
    angles                              -0.25,0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_16
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.svet_kabin01"
    angles                              -0.25,0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_17
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_01"
    angles                              -0.25,0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_18
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_02"
    angles                              -0.25,0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_19
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_03"
    angles                              -0.25,0.25
    notches                             0,1
    notchheight                         1,1
  }
  switch_20
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_2.im"
    att                                 "a.switch2_04"
    angles                              -0.25,0.25
    notches                             0,1
    notchheight                         1,1
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "revers.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              -0.35,0.35
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  throttle_lever
  {
    mesh                                "kontroller.im"
    auto-create                         1
    kind                                "lever"
    att                                 "a.thottle_lever"
    limits                              0,9
    angles                              0,-2
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.9,1
    notchheight                         1,1,1,1,1,1,1,1
    radius                              0.2
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "brake_lever.im"
    att                                 "a.train_brake_lever"
    limits                              0,3
    angles                              0,-2
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              0.15
    att-parent                          "default"
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "ruchnik.im"
    att                                 "a.ind_brake_lever"
    angles                              0,-3.2
    limits                              0,32
    att-parent                          "default"
    notches                             0,0.41,0.53,0.78,1
    notchheight                         1,2,2,2,1
    radius                              0.15
    test-collisions                     1
    mousespeed                          1
  }
  bploco_equaliser
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_3.im"
    att                                 "a.manoneter_needle04"
    limits                              30,750
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_2.im"
    att                                 "a.manoneter_needle01"
    limits                              0,10000
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_3.im"
    att                                 "a.manoneter_needle02"
    limits                              0,1000
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_2.im"
    att                                 "a.manoneter_needle03"
    limits                              -200,800
    att-parent                          "default"
  }
  ampmeter_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_1.im"
    att                                 "a.voltmeter_needle"
    limits                              0,1500
    angles                              0,0.6
    att-parent                          "default"
  }
  horn
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "pedal.im"
    att                                 "a.horn"
    limits                              0,1
    angles                              0.5,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.05
    att-parent                          "default"
  }
  swivel_chair
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kreslo.im"
    att                                 "a.chair1"
    limits                              0,1
    angles                              6.8,-6.8
    radius                              0.1
    mousespeed                          0.2
    att-parent                          "default"
  }
  swivel_chair1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kreslo.im"
    att                                 "a.chair2"
    limits                              0,8
    angles                              6.8,-6.8
    radius                              0.2
    mousespeed                          0.2
    att-parent                          "default"
  }
}
description                             "кабина электропоезда ЭД2Т"
kind                                    "interior"
username                                "ED2T-0046 kabina"
author                                  "Dimas"
organisation                            "club-ts.ru"
contact-email                           "joecocker99@mail.ru"
contact-website                         "http://club-ts.ru"
trainz-build                            2.7
kuid                                    <kuid:147369:100927>
kuid-table
{
  radio                                 <kuid:293946:100123>
}
Файлы:
brake_lever.im	8.6 kB
kabina.im	939.3 kB
kabina.jpg	769.3 kB
kabina.texture.txt	29 B
knopka_2.im	3.2 kB
knopka_3.im	3.2 kB
knopka_4.im	3.8 kB
kontroller.im	26.5 kB
kreslo.im	62.5 kB
krutilka_1.im	4.2 kB
krutilka_2.im	4.6 kB
krutilka_3.im	8.5 kB
misc_mixed.jpg	2.7 MB
misc_mixed.texture.txt	33 B
needle_1.im	4.4 kB
needle_2.im	6.0 kB
needle_3.im	3.2 kB
pedal.im	1.3 kB
pol_st.jpg	285.8 kB
pol_st.texture.txt	29 B
potolok.jpg	233.8 kB
potolok.texture.txt	30 B
pult.jpg	504.1 kB
pult.texture.txt	27 B
rb.im	9.9 kB
revers.im	1.3 kB
ruchnik.im	14.0 kB
sound
sound / cabin.txt	1.0 kB
sound / knopka.wav	4.9 kB
sound / lever_2.wav	11.6 kB
sound / notch_1.wav	25.3 kB
sound / throttle.wav	14.4 kB
strelki.jpg	50.4 kB
strelki.texture.txt	30 B
switch_1.im	4.7 kB
switch_1a.im	4.7 kB
switch_2.im	7.5 kB
wind_out-a.jpg	37.9 kB
wind_out-wind_out-a.texture.txt	53 B
wind_out.jpg	168.9 kB
zanavesochki-zanavesochki_prosvet.texture.txt	35 B
zanavesochki.jpg	359.5 kB
Общий объём файлов:	6.2 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid:147369:100927>	interior	ED2T-0046 kabina	2.7	25.06.2020 16:54:30	5.5 MB
Зависимости:
kuid	author	kind	name	build	date	size
<kuid2:293946:100123:2>	#293946	hornsound	DSP Radio sounds	2.9	28.02.2021 23:01:23	5.2 kB
Всего связей: 1, неизвестных связей: 0
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid:147369:100960>	#147369	traincar	RZD ED4M 0086 Golova	2.9	25.06.2020 16:54:30	11.3 MB
<kuid:147369:100963>	#147369	traincar	RZD ED4M 0082 Golova	2.9	25.06.2020 16:55:17	11.3 MB