<kuid:144464:100090> Midwest HarborMaster HTML TANE

Тип: html-asset
Опубликовано: 14.07.2020 8:59:51
Скачиваний: 27
Размер: 435.9 kB

Скачать

config.txt:

username                                "Midwest HarborMaster HTML TANE"
trainz-build                            3.5
category-class                          "YH"
kind                                    "html-asset"
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
string-table
{
  html_error_couplers_1                 "Session Terminated - Broken Couplers!"
  html_error_couplers_2                 "Avoid breaking couplers to complete the task."
  html_error_derail_1                   "Session Terminated - Derailment!"
  html_error_derail_2                   "Avoid derailing to complete the task."
  html_error_spad_1                     "Session Terminated - Signal Passed At Danger!"
  html_error_spad_2                     "Avoid passing red signals to complete the task."
  html_error_spad_3                     "Observe all signals.  Watch HUD and switch junctions as needed."
  html_error_spad_4                     "Local passenger service may suddenly create restrictions."
  html_error_speeding_1                 "Session Terminated - Excessive Speeding!"
  html_error_speeding_2                 "Avoid excessive speeding to complete the task."
  html_error_late_train_1               "Session Terminated - Late Train"
  html_error_late_train_2               "A passenger train was delayed and did not meet schedule."
  html_error_late_train_3               "Avoid delaying passenger services to complete the task."
  html_error_late_train_4               "Stay off passenger lines as much as possible.  Reset junctions on the main line if you change them.  If passenger service is delayed by your traffic, verify that it can proceed when you are clear."
  html_session_info_1                   "Midwest HarborMaster"
  html_session_info_2                   "Select one of three freight moving tasks.  You will need to switch junctions.  Excessive speeding, passing a signal at danger, a derailment, or a late passenger train will end the session."
  html_session_info_3                   "Passenger service is limited to the main lines with the concrete ties (or sleepers).  Freight is generally restricted to the sidings with the wooden ties.  Maintaining the passenger train schedules requires keeping the main lines clear of local traffic, so limit your activity to the freight lines as much as possible.  As always, local knowledge can be helpful."
  html_session_info_4                   "To select a task, use 'Move to Train...' on the Driver Command Bar.  Click twice on your selected loco, then drive it.  Check the session objectives for task details."
  html_task_complete_1                  "Task complete!  Thanks to you."
  html_containers_info_1                "HarborMaster - Moving Containers"
  html_containers_info_2                "Jump into Switcher #1560 and begin forming your consist using the 5 flatcars waiting near the loco depot.  Add the 8 flatcars sitting in the Transfer Yard west of the loco depot.  Make note of where you find the consists because you will need to return them later."
  html_containers_info_3                "Load at Container Terminals 1 and 3, then unload at Container Depots 1 and 2.  Return the empty flatcars to their original positions.  Finish the task by returning the loco."
  html_containers_info_4                "An unsignaled junction west of the container terminals is shared with the main line.  Be aware of other trains in that area."
  html_containers_info_5                "Difficulty: Medium<br>Estimated Driver Time: about 60 minutes, depends on local traffic and your choices."
  html_containers_info_6                "To select this task, use 'Move to Train...' on the Driver Command Bar and drive the #1560 switcher."
  html_scrap_info_1                     "HarborMaster - Steptoe Scrap"
  html_scrap_info_2                     "Moving scrap.  Drive the #2593 shunter to the Crew Hut at the Transfer Yard to get your objectives."
  html_scrap_info_3                     "Difficulty: Medium<br>Estimated Driver Time: about 2 hours, depends on local traffic and your choices."
  html_scrap_info_4                     "To select this task, use 'Move to Train...' on the Driver Command Bar and drive the #2593 switcher."
  html_ttt_info_1                       "HarborMaster - Two Train Turnaround"
  html_ttt_info_2                       "Drive the #942 switcher to the Signal Hut at the Transfer Yard and wait for two incoming trains.  Keep your loco clear of the Crew Hut today, because both incoming crews would like to take a break there while you work."
  html_ttt_info_3                       "Cut and load the first incoming train at Demak Pipe and Tubing.  The second incoming train is a shipment of coal that needs to be cut and delivered locally."
  html_ttt_info_4                       "Your work will be done when the loaded flatcars and the empty coal hoppers have been returned to their original positions in the Transfer Yard, and both crews have started home with their trains."
  html_ttt_info_5                       "When you have one or both trains ready to depart, return to the Signal Hut."
  html_ttt_info_6                       "Difficulty: Hard<br>Estimated Driver Time: about 3 hours, depends on local traffic and your choices."
  html_ttt_info_7                       "To select this task, use 'Move to Train...' on the Driver Command Bar and drive the #942 switcher."
  html_ttt_info3_1                      "Flatcars are handed over to you..."
  html_ttt_info3_2                      "The incoming coal train is still about 5 minutes out.  You may begin to cut and load the flatcars now, or wait for the coal train to arrive."
  html_ttt_info3_3                      "Take care that the incoming coal train has a clear path into the Transfer Yard and then to the Crew Hut."
  html_ttt_info4_1                      "The coal hoppers are handed over to you..."
  html_ttt_info4_2                      "<br>Allow the crew access to the Crew Hut."
}
kuid                                    <kuid:144464:100090>
kuid-table
{
}

Файлы:

error_derail.html	539 B
containers_info.html	965 B
info_icon.tga	4.5 kB
objectivelist_icon.tga	4.5 kB
error_speeding.html	543 B
attention.jpg	24.4 kB
scrap_info.html	748 B
map.html	231 B
error_spad.html	935 B
harbormaster_ts12_map.jpg	19.4 kB
scrap_info.jpg	18.1 kB
error_late_train.html	772 B
session.jpg	16.4 kB
session_info.html	1.0 kB
error_broken_couplers.html	543 B
task_complete.html	455 B
stop_icon.tga	4.5 kB
stop_icon2.tga	4.5 kB
ttt_info3.html	567 B
containers_info.jpg	18.5 kB
ding.wav	25.1 kB
track.jpg	19.4 kB
ttt_info.html	1.0 kB
ttt_info4.html	477 B
ttt_info2.html	435 B
ttt_info.jpg	17.7 kB
terminate_icon.jpg	31.0 kB
foghorn8.wav	215.4 kB
thumbnail.jpg	114.4 kB
Общий объём файлов:	547.0 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:144464:100090>	html-asset	Midwest HarborMaster HTML TANE	3.5	14.07.2020 8:59:51	435.9 kB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет