<kuid:144464:100008> Midwest HarborMaster HTML

Тип: html-asset
Опубликовано: 14.07.2020 8:59:00
Скачиваний: 11
Размер: 436.5 kB

Скачать

config.txt:

kuid                                    <kuid:144464:100008>
username                                "Midwest HarborMaster HTML"
trainz-build                            3.4
category-class                          "YH"
kind                                    "html-asset"
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
string-table
{
  html_error_couplers_1                 "Session Terminated - Broken Couplers!"
  html_error_couplers_2                 "Avoid breaking couplers to complete the task."
  html_error_derail_1                   "Session Terminated - Derailment!"
  html_error_derail_2                   "Avoid derailing to complete the task."
  html_error_spad_1                     "Session Terminated - Signal Passed At Danger!"
  html_error_spad_2                     "Avoid passing red signals to complete the task."
  html_error_spad_3                     "Observe all signals.  Watch HUD and switch junctions as needed."
  html_error_spad_4                     "Local passenger service may suddenly create restrictions."
  html_error_speeding_1                 "Session Terminated - Excessive Speeding!"
  html_error_speeding_2                 "Avoid excessive speeding to complete the task."
  html_error_late_train_1               "Session Terminated - Late Train"
  html_error_late_train_2               "A passenger train was delayed and did not meet schedule."
  html_error_late_train_3               "Avoid delaying passenger services to complete the task."
  html_error_late_train_4               "Stay off passenger lines as much as possible.  Reset junctions on the main line if you change them.  If passenger service is delayed by your traffic, verify that it can proceed when you are clear."
  html_session_info_1                   "Midwest HarborMaster"
  html_session_info_2                   "Select your task as a freight mover at the harbor."
  html_session_info_3                   "The harbor is busy with both freight and passengers.  Passenger service is generally limited to the main lines, while freight is generally restricted to the sidings.  Maintaining the passenger train schedules requires keeping the main lines clear of local traffic."
  html_session_info_4                   "Please note the difference between the main lines and the freight tracks.  The sleepers on the main lines are concrete and lighter in color - this is where passenger services run.  You are advised to limit your activity to the freight lines as much as possible."
  html_session_info_5                   "Your work could end abruptly.  Perhaps you passed a red signal without authorization.  Perhaps you were caught speeding excessively.  Perhaps you broke couplers or even caused a derailing.  Perhaps you delayed a passenger service and it didn't meet schedule.  If so, the session will end."
  html_session_info_6                   "You must select your task.  To select a task, select 'Move to Train...' on the Driver Command Bar.  Click twice on your selected loco, then drive it."
  html_session_info_7                   "Click on the red arrow to check the objectives for your selected task.  The objectives will be lost if the session is saved and resumed, but as there are no time constraints, feel free to take a break at any time."
  html_containers_info_1                "HarborMaster - Moving Containers"
  html_containers_info_2                "Jump into Switcher #1560 and begin forming your consist using the 5 flatcars waiting near the loco depot.  Add the 8 flatcars sitting in the Transfer Yard west of the loco depot.  Make note of where you find the consists because you will need to return them later."
  html_containers_info_3                "Load at Container Terminals 1 and 3, then unload at Container Depots 1 and 2.  Return the empty flatcars to their original positions.  Finish the task by returning the loco."
  html_containers_info_4                "An unsignaled junction west of the container terminals is shared with the main line.  Be aware of other trains in that area."
  html_containers_info_5                "Difficulty: Easy<br>Estimated Driver Time: about 60 minutes, depends on local traffic and your choices."
  html_containers_info_6                "To select this task, use 'Move to Train...' on the Driver Command Bar and drive the #1560 switcher."
  html_scrap_info_1                     "HarborMaster - Steptoe Scrap"
  html_scrap_info_2                     "Moving scrap.  Drive the #2593 shunter to the Crew Hut at the Transfer Yard to get your objectives."
  html_scrap_info_3                     "Difficulty: Easy<br>Estimated Driver Time: about 2 hours, depends on local traffic and your choices."
  html_scrap_info_4                     "To select this task, use 'Move to Train...' on the Driver Command Bar and drive the #2593 switcher."
  html_ttt_info_1                       "HarborMaster - Two Train Turnaround"
  html_ttt_info_2                       "Drive the #942 switcher to the Signal Hut at the Transfer Yard and wait for two incoming trains.  Keep your loco clear of the Crew Hut today, because both incoming crews would like to take a break there while you work."
  html_ttt_info_3                       "Cut and load the first incoming train at Demak Pipe and Tubing.  The second incoming train is a shipment of coal, which you will cut and deliver locally."
  html_ttt_info_4                       "Your morning's work will be done when the loaded flatcars and the empty coal hoppers have been returned to their original positions in the Transfer Yard, and both crews have started home with their trains."
  html_ttt_info_5                       "When you have one or both trains ready to depart, return to the Signal Hut."
  html_ttt_info_6                       "Difficulty: Medium<br>Estimated Driver Time: about 3 hours, depends on local traffic and your choices."
  html_ttt_info_7                       "To select this task, use 'Move to Train...' on the Driver Command Bar and drive the #942 switcher."
  html_ttt_info2_1                      "Both incoming trains are running late.  The first train was scheduled to arrive at 05:30.  The coal train is scheduled to arrive at 05:40."
  html_ttt_info2_2                      "Both trains will approach from the east.  Wait here for a bit."
  html_ttt_info3_1                      "Flatcars are handed over to you..."
  html_ttt_info3_2                      "The incoming coal train is still about 10 minutes out.  You may begin to cut and load the flatcars, or you may wait for the coal train and deliver coal first."
  html_ttt_info3_3                      "Take care that the incoming coal train has a clear path into the Transfer Yard and then to the Crew Hut."
  html_ttt_info4_1                      "The coal hoppers are handed over to you..."
  html_ttt_info4_2                      "<br>Allow the crew access to the Crew Hut."
}
kuid-table
{
}

Файлы:

attention.jpg	24.4 kB
containers_info.html	965 B
containers_info.jpg	18.5 kB
ding.wav	25.1 kB
error_broken_couplers.html	543 B
error_derail.html	539 B
error_late_train.html	772 B
error_spad.html	935 B
error_speeding.html	543 B
foghorn8.wav	215.4 kB
harbormaster_ts12_map.jpg	19.4 kB
info_icon.tga	4.5 kB
map.html	231 B
objectivelist_icon.tga	4.5 kB
scrap_info.html	748 B
scrap_info.jpg	18.1 kB
session.jpg	16.4 kB
session_info.html	1.3 kB
stop_icon.tga	4.5 kB
stop_icon2.tga	4.5 kB
terminate_icon.jpg	31.0 kB
thumbnail.jpg	114.4 kB
track.jpg	19.4 kB
ttt_info.html	1.0 kB
ttt_info.jpg	17.7 kB
ttt_info2.html	435 B
ttt_info3.html	567 B
ttt_info4.html	477 B
Общий объём файлов:	546.9 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:144464:100008>	html-asset	Midwest HarborMaster HTML	3.4	14.07.2020 8:59:00	436.5 kB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет