Set maximum speed of train at maximum throttle. The maximum speed can be obtained in two ways. You can run the train on a straight track at maximum throttle and record the speed once the train reaches steady motion, or you can directly read that number from the locomotive's engine settings. maximum speed vary from one locomotive to another. WARNING: setting arbitrary maximum speed may result in wrong speed calculations when used with SetDCCSpeed command. This command and SetDCCSpeed command work the best if and only if correct maximum speed setting is assigned to the driver's train using this command. In order to enter maximum speed value, use InputTable rule and type the following on a new line in the rule editor:
maxspeed, SPEED_VALUE, SPEED_UNIT
where SPEED_VALUE is the magnitude of the maximum speed of the vehicle and must be an integer and SPEED_UNIT is the unit used for maximum speed setting. The valid units are KPH, MPH, and MPS. KPH is the default unit and may be left blank in the input field. You can define as many maxspeed statements as you want in the rule editor.
Ex: maxspeed, 125 (max speed is 125 KPH)
maxspeed,35,MPS (max speed is 35 MPS which correspond to 125KPH)
Тип: Команда