<kuid:101046:102079> Interior for FM H12-44 NKP

Тип: Кабина
Опубликовано: 21.06.2020 14:14:21
Скачиваний: 63
Размер: 13.0 MB

Скачать

Interior for Fairbanks Morse H12-44 Nickel Plate Road.

config.txt:

username                                "Interior for FM H12-44 NKP"
kind                                    "interior"
cameradefault                           0
description                             "Interior for Fairbanks Morse H12-44 Nickel Plate Road."
trainz-build                            2.9
author                                  "davesnow"
organisation                            "-"
contact-email                           "-"
contact-website                         "-"
category-region                         "AT"
category-era                            "1950s"
category-class                          "ZX"
license                                 "This item is supplied free of charge for personal use by registered users of Trainz. It or its contents must not be modified, offered for sale or supplied as any part of a Payware package or provided for downloading on any site other than Auran unless this is expressly permitted in writing by the author davesnow / David E. Snow.


DISCLAIMER: It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item."
cameralist
{
  camera0                               -1.21,5.645,3.564,-12.565,-0
  camera1                               -1.112,5.473,3.564,-13.78,-0.115
  camera2                               -1.869,5.317,3.564,-15.74,-0.153
  camera3                               -0,5.727,3.842,-15.692,-0.412
  camera4                               1.172,5.391,3.565,-18.445999,-0
  camera5                               1.21,5.489,3.565,-17.698,-0
  camera6                               0,4.512,3.842,-22.021999,-0.156
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
mesh-table
{
  default
  {
    mesh                                "CAB_NKP_DES.im"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "Lever_T_R.im"
    att                                 "a.throttle_lever"
    limits                              0,8
    angles                              -0.61,0.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    auto-create                         1
    mousespeed                          -1
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Lever_Train_Brake.im"
    att                                 "a.trainbrake_handle"
    limits                              0,4
    angles                              -0.69,1.04
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,2,2,2
    mousespeed                          1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "Lever_Reverser.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.69,-0.69
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          1
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Lever_Indep_Brake.im"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              -0.87,0.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.15
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "Needle.im"
    att                                 "a.equaliser_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "Needle_red.im"
    att                                 "a.main_res_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "Needle_red.im"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "Needle.im"
    att                                 "a.brake_pipe_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedo_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,27.777
    angles                              0,3.9
    att-parent                          "default"
  }
  horn
  {
    kind                                "pullrope"
    mesh                                "horn.im"
    att                                 "a.horn"
    auto-create                         1
    angles                              0.1,0
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "Needle_Amp.im"
    att                                 "a.ammeter"
    limits                              0,1500
    angles                              0,1.9
    auto-create                         1
    att-parent                          "default"
  }
  voltmeter_battery
  {
    kind                                "needle"
    mesh                                "needle_amp_2.im"
    att                                 "a.ammeter01"
    limits                              0,1500
    angles                              0,1.9
    auto-create                         1
    att-parent                          "default"
  }
}
kuid                                    <kuid:101046:102079>
kuid-table
{
}

Файлы:

$screenshot$.jpg	33.0 kB
cab art cab mode.texture.txt	39 B
cab art cab mode.tga	12.0 MB
cab art.texture.txt	30 B
cab art.tga	12.0 MB
cab controls art.texture.txt	39 B
cab controls art.tga	12.0 MB
cab_nkp_des.im	1.3 MB
coupler new art.texture.txt	38 B
coupler new art.tga	3.0 MB
hand brake art.texture.txt	37 B
hand brake art.tga	3.0 MB
horn.im	15.2 kB
levers & brake stand art-levers & brake stand art.texture.txt	83 B
levers & brake stand art.texture.txt	47 B
levers & brake stand art.tga	16.0 MB
lever_indep_brake.im	10.7 kB
lever_reverser.im	11.6 kB
lever_train_brake.im	13.0 kB
lever_t_r.im	11.6 kB
loco art 1.texture.txt	33 B
loco art 1.tga	12.0 MB
loco art 2.texture.txt	33 B
loco art 2.tga	12.0 MB
needle.im	2.8 kB
needle_amp.im	2.8 kB
needle_amp_2.im	2.8 kB
needle_red.im	2.8 kB
sound
sound / cabin.txt	234 B
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / lever_5.wav	18.3 kB
sound / notch_1.wav	2.8 kB
sound / reverser.wav	10.4 kB
sound / throttle.wav	4.0 kB
speedometer.texture.txt	34 B
speedometer.tga	768.0 kB
speedo_needle.im	3.4 kB
Общий объём файлов:	84.2 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:101046:102079>	interior	Interior for FM H12-44 NKP	2.9	21.06.2020 14:14:21	13.0 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:101046:102078>	#101046	traincar	Fairbanks Morse H12-44 Locomotive NKP	2.9	21.06.2020 13:55:21	6.8 MB