<kuid2:96914:55420:3> Norris 4-2-0 Interior

Тип: Кабина
Опубликовано: 21.01.2024 21:56:03
Скачиваний: 21
Размер: 1.4 MB

Скачать

Cabin for Norris 4-2-0. Per the prototype, no steam gauges, injectors or sight glasses are included. It does, however, have the 1830s operational equivalents of each (Salter safety valve, mechanical water pumps and try cocks, respectively.)

config.txt:

kuid                                    <kuid2:96914:55420:3>
category-class                          "ZI"
category-region                         "US;CA;MX;AT;UK;DE;CU"
category-era                            "1830s;1840s;1850s"
script                                  "NorrisCabin"
class                                   "NorrisCabin"
cameralist
{
  camera0                               -0.588,0.291,0.3,0,0
  camera1                               -0.835,-0.403,-0.158,0.341,-0.631
  camera2                               -0.341,0.466,0.314,0.308,-0.572
  camera3                               -0.737,0.437,0.314,2.838,-0.172
}
cameradefault                           0
author                                  "Ben Neal"
organisation                            "Sub-Par Productions"
contact-email                           "bdaneal@yahoo.com"
contact-website                         "www.steammachine.com/bdaneal"
license                                 "Feel free to reskin this and release it when and wherever you like as freeware. All I ask is that you indicate where to find the original package and also include the original readme which credits the authors who have contributed to the creation of this asset. This asset may not be used by any payware content without permission."
mesh-table
{
  default
  {
    mesh                                "norris_cabin.im"
    auto-create                         1
  }
  regulator
  {
    mesh                                "regulator.im"
    anim                                "regulator.kin"
    auto-create                         1
    limits                              0,1
    kind                                "animated-lever"
    test-collisions                     0
    mousespeed                          -1
  }
  regulator-collision-box
  {
    mesh                                "hitbox.im"
    att-parent                          "regulator"
    att                                 "a.thr_grab"
    auto-create                         1
    kind                                "collision-proxy"
    opacity                             0
    collision-parent                    "regulator"
  }
  boiler_needle
  {
    kind                                "animated-dial"
    mesh                                "bpgauge.im"
    anim                                "bpgauge.kin"
    limits                              0,625
    auto-create                         1
  }
  reverser
  {
    mesh                                "reverser.im"
    anim                                "reverser.kin"
    auto-create                         1
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "animated-lever"
    test-collisions                     0
    mousespeed                          -1
  }
  reverser-collision-box
  {
    mesh                                "hitbox.im"
    att-parent                          "reverser"
    att                                 "a.rev_grab"
    auto-create                         1
    kind                                "collision-proxy"
    opacity                             0
    collision-parent                    "reverser"
  }
  watervalve0
  {
    mesh                                "injector.im"
    att                                 "a.injector1"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notchheight                         1,1,1,1,1
    angles                              0,-0.5
  }
  watervalve1
  {
    mesh                                "injector.im"
    att                                 "a.injector2"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    angles                              0,0.5
  }
  fire_plates
  {
    mesh                                "fireplates.im"
    anim                                "fireplates.kin"
    auto-create                         1
    limits                              0,1
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "animated-lever"
    test-collisions                     0
    mousespeed                          -1
  }
  fire_plates-collision-box
  {
    mesh                                "hitbox.im"
    att-parent                          "fire_plates"
    att                                 "a.fbgrip"
    auto-create                         1
    kind                                "collision-proxy"
    opacity                             0
    collision-parent                    "fire_plates"
  }
  try_cock1
  {
    mesh                                "trycock.im"
    att                                 "a.try1"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    angles                              0,1
  }
  water1
  {
    mesh                                "water.im"
    anim                                "water.kin"
    att                                 "a.try1"
    att-parent                          "default"
    auto-create                         0
    test-collisions                     0
    animation-loop-speed                1
  }
  try_cock2
  {
    mesh                                "trycock.im"
    att                                 "a.try2"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    angles                              0,1
  }
  water2
  {
    mesh                                "water.im"
    anim                                "water.kin"
    att                                 "a.try2"
    att-parent                          "default"
    auto-create                         0
    test-collisions                     0
    animation-loop-speed                1
  }
  try_cock3
  {
    mesh                                "trycock.im"
    att                                 "a.try3"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    angles                              0,1
  }
  water3
  {
    mesh                                "water.im"
    anim                                "water.kin"
    att                                 "a.try3"
    att-parent                          "default"
    auto-create                         0
    test-collisions                     0
    animation-loop-speed                1
  }
  firebox
  {
    mesh                                "firestuffs/firebox.im"
    auto-create                         1
    kind                                "firebox"
    light                               0
    test-collisions                     0
  }
  fire
  {
    mesh                                "firestuffs/fire.im"
    auto-create                         1
    light                               0
    test-collisions                     0
  }
  coal
  {
    mesh                                "firestuffs/coal.im"
    auto-create                         1
    light                               0
    test-collisions                     0
  }
  fireglow
  {
    mesh                                "firestuffs/fireglow.im"
    auto-create                         1
    light                               0
    test-collisions                     0
  }
}
obsolete-table
{
}
description                             "Cabin for Norris 4-2-0. Per the prototype, no steam gauges, injectors or sight glasses are included. It does, however, have the 1830s operational equivalents of each (Salter safety valve, mechanical water pumps and try cocks, respectively.)"
trainz-build                            2.9
username                                "Norris 4-2-0 Interior"
kind                                    "interior"
outside-visible-from-cabin              1
cabin-visible-from-outside              1
thumbnails
{
  0
  {
    width                               240
    height                              180
    image                               "thumbnail.jpg"
  }
}
kuid-table
{
}

Файлы:

bpgauge.im	15.6 kB
bpgauge.kin	2.2 kB
env_metal.bmp	12.1 kB
env_metal.texture.txt	32 B
fireplates.im	12.2 kB
fireplates.kin	4.1 kB
firestuffs
firestuffs / coal.im	2.4 kB
firestuffs / coalfire.texture.txt	31 B
firestuffs / coalfire.tga	96.0 kB
firestuffs / fire.im	880 B
firestuffs / firebox.im	2.1 kB
firestuffs / firebox_glow-firebox_glow_op.texture.txt	62 B
firestuffs / firebox_glow.tga	12.0 kB
firestuffs / firebox_glow_op.bmp	12.1 kB
firestuffs / fireglow.im	876 B
firestuffs / flame_test2.texture.txt	34 B
firestuffs / flame_test2.tga	128.0 kB
firestuffs / vtfirebox.texture.txt	32 B
firestuffs / vtfirebox.tga	768.0 kB
hitbox.im	1.2 kB
injector.im	2.2 kB
norriscabin.gs	4.3 kB
norris_cabin.im	69.0 kB
norris_interior.texture.txt	38 B
norris_interior.tga	1.0 MB
regulator.im	20.4 kB
regulator.kin	2.2 kB
reverser.im	10.7 kB
reverser.kin	4.3 kB
sound
sound / boiler_blow_down.wav	79.7 kB
sound / cabin.txt	217 B
sound / coal_into_firebox1.wav	64.7 kB
sound / coal_into_firebox2.wav	51.9 kB
sound / coal_into_firebox3.wav	41.7 kB
sound / coal_shovel1.wav	101.4 kB
sound / coal_shovel2.wav	64.2 kB
sound / coal_shovel_into_combined.wav	97.4 kB
sound / firebox_close.wav	23.6 kB
sound / firebox_open.wav	16.3 kB
sound / fire_roar.wav	72.6 kB
sound / metal_footstep_left.wav	13.1 kB
sound / metal_footstep_right.wav	13.1 kB
sound / regulator2.wav	43.7 kB
sound / reverser.wav	72.3 kB
sound / shovel_hit.wav	20.2 kB
thumbnail.jpg	9.4 kB
trycock.im	4.9 kB
water.im	6.1 kB
water.kin	5.8 kB
water.texture.txt	28 B
water.tga	12.0 kB
Общий объём файлов:	3.0 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:96914:55420:3>	interior	Norris 4-2-0 Interior	2.9	21.01.2024 21:56:03	1.4 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:96914:420:3>	#96914	traincar	Norris 4-2-0 B&O	2.9	21.01.2024 21:56:03	1.8 MB