This ''junction lever'' is of a type that was used in nearly all Victorian Railways mechanically interlocked yards. They have been used for a long time and will suit any yard that doesn't need staff locks. The model is specifically designed and intended to be used, exclusively, in conjunction with the Natvander ''Point Connector Rod'' set and as kind ''mo-junction'', will operate as a standard Auran Point Lever. Please note that there are THREE versions of this asset, the ''Type - A'', which has the actuating rodding approaching from the inside of the 'elbow', the ''Type - B'' (this asset), which has the actuating rodding approaching from the 'outside' of the elbow and the ''Type C'', which has the actuating rodding approaching at a 90 degree angle to the track. The first two types are fully ''interchangeable'', allowing the apparatus to be located on either side of the track. depending upon the installation requirements and the third need only be rotated (in the normal manner in Surveyor), to have it swap sides, although the VR's S. O. P. would have all these devices placed along the straight side of the junction.
Тип: Стрелка