<kuid2:60238:9901:1> Piper Cub J-3 Military Startup

Тип: traincar
Опубликовано: 12.06.2020 19:25:10
Скачиваний: 34
Размер: 2.8 MB

Скачать

A flyable Piper Cub J-3 aircraft, a light aircraft that was built between 1937 and 1947 by Piper Aircraft. The aircraft tilts and banks realistically. The speed for tilting may be altered in the string table above - speeds are in kph. Note landing speed above is a fraction of full speed, eg 0.45, not kph.

It does not have an operating interior, but does have various exterior views based on an invisible interior, use the [ and ] keys from the interior view. It does load passengers at suitable airports.Initially the engines are stopped, Use the B key to start or stop engines. On startup, the pilot tests the rudder and tail elevators.

The aircraft has a number of animations that can be operated by keyboard keys, or the Aircraft Action Trigger, kuid:76656:24050, when placed on track and set to the correct number:

- to start engines, press the B key or use trigger setting 2. An engine start rule is also available for AI.
- open side doors, H key.
- issue smoke and sound from the tyres when landing, use trigger setting 4.
- to flare the aircraft for landing, trigger setting 7 or V key.
- come to a gradual stop on landing, trigger setting 9.
- set speed to 40% of maximum speed, for landing approach, trigger setting 14.

Note: Shadow models are required but cannot be animated in TS12 to follow aircraft animation. If you do not like the shadow showing on the body of the aircraft, in the config call up the shadow_inv.im file which is an invisible shadow.

config.txt:

kuid                                    <kuid2:60238:9901:1>
kind                                    "traincar"
mass                                    10000
engine                                  1
fonts                                   0
bogeys
{
  0
  {
    reversed                            0
    bogey                               <kuid:-10:149>
  }
  1
  {
    reversed                            0
    bogey                               <kuid:-10:149>
  }
}
enginespec                              <kuid2:60238:51035:1>
enginesound                             <kuid2:60238:53049:1>
hornsound                               <kuid2:60238:54027:1>
interior                                <kuid2:60238:55015:1>
disable-extra-track-sounds              1
script                                  "aircraft163"
class                                   "aircraft"
category-keyword                        "aircraft;piper;cub;startup"
soundscript
{
  engine
  {
    trigger                             "engine"
    attachment                          "a.sound0"
    nostartdelay                        0
    repeat-delay                        -0,-0
    distance                            20,170
    sound
    {
      0                                 "engine.wav"
    }
  }
}
mesh-table
{
  default
  {
    mesh                                "body/base.im"
    anim                                "body/base.kin"
    auto-create                         1
  }
  flashers
  {
    mesh                                "body/flashers.im"
    att                                 "a.origin01"
    att-parent                          "base01"
    effects
    {
      flasher0
      {
        kind                            "attachment"
        att                             "a.marker0"
        default-mesh                    <kuid2:60238:1000021:1>
      }
      flasher1
      {
        kind                            "attachment"
        att                             "a.marker1"
        default-mesh                    <kuid2:60238:1000023:1>
      }
      flasher2
      {
        kind                            "attachment"
        att                             "a.marker2"
        default-mesh                    <kuid2:60238:1000021:1>
      }
    }
  }
  base01
  {
    mesh                                "body/base01.im"
    auto-create                         1
    anim                                "body/base01.kin"
    att                                 "a.origin"
    att-parent                          "default"
  }
  body
  {
    mesh                                "body/body.im"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  pilot_front
  {
    mesh                                "body/pilot_front.im"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  pilot_rear
  {
    mesh                                "body/pilot_rear.im"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  prop0
  {
    mesh                                "body/prop2_timber.im"
    anim                                "body/prop2_timber.kin"
    auto-create                         0
    att                                 "a.prop0"
    att-parent                          "body"
  }
  prop2
  {
    mesh                                "body/propdisk.im"
    anim                                "body/propdisk.kin"
    animation-loop-speed                "0.3"
    att                                 "a.prop0"
    att-parent                          "body"
  }
  rudder
  {
    mesh                                "body/rudder.im"
    anim                                "body/rudder.kin"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  elevators
  {
    mesh                                "body/elevator.im"
    anim                                "body/elevator.kin"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  flaps
  {
    mesh                                "body/flaps.im"
    anim                                "body/flaps.kin"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  left-passenger-door
  {
    mesh                                "body/door.im"
    anim                                "body/door.kin"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  shadow
  {
    mesh                                "shadow/shadow.im"
    att-parent                          "default"
  }
}
smoke0
{
  attachment                            "a.wheel_smoke0"
  mode                                  "time"
  color                                 94,94,94
  start                                 0
  rate                                  10
  velocity                              6
  lifetime                              1
  minsize                               0.2
  maxsize                               1.5
  accel                                 0.1,0.1,0.25
  inherit-velocity                      1
  enabled                               0
}
smoke1
{
  attachment                            "a.wheel_smoke1"
  mode                                  "time"
  color                                 94,94,94
  start                                 0
  rate                                  10
  velocity                              6
  lifetime                              1
  minsize                               0.2
  maxsize                               1.5
  accel                                 0.1,0.1,0.25
  inherit-velocity                      1
  enabled                               0
}
username                                "Piper Cub J-3 Military Startup"
trainz-build                            3.5
category-class                          "AL"
light_color                             255,255,255
ditch_color                             255,200,200
string-table
{
  tilt-speed                            "50"
  takeoff-speed                         "120"
  tail-lift-speed                       "50"
  landing-speed                         "0.5"
}
queues
{
  passengers
  {
    size                                2
    initial-count                       1
    passenger-queue                     1
    product-kuid                        <kuid:-3:10060>
  }
}
thumbnails
{
  0
  {
    image                               "preview.jpg"
    width                               240
    height                              180
  }
}
description                             "A flyable Piper Cub J-3 aircraft, a light aircraft that was built between 1937 and 1947 by Piper Aircraft. The aircraft tilts and banks realistically. The speed for tilting may be altered in the string table above - speeds are in kph. Note landing speed above is a fraction of full speed, eg 0.45, not kph. 

It does not have an operating interior, but does have various exterior views based on an invisible interior, use the [ and ] keys from the interior view. It does load passengers at suitable airports.Initially the engines are stopped, Use the B key to start or stop engines. On startup, the pilot tests the rudder and tail elevators.

The aircraft has a number of animations that can be operated by keyboard keys, or the Aircraft Action Trigger, kuid:76656:24050, when placed on track and set to the correct number:

- to start engines, press the B key or use trigger setting 2. An engine start rule is also available for AI.
- open side doors, H key.
- issue smoke and sound from the tyres when landing, use trigger setting 4. 
- to flare the aircraft for landing, trigger setting 7 or V key.
- come to a gradual stop on landing, trigger setting 9.
- set speed to 40% of maximum speed, for landing approach, trigger setting 14.

Note: Shadow models are required but cannot be animated in TS12 to follow aircraft animation. If you do not like the shadow showing on the body of the aircraft, in the config call up the shadow_inv.im file which is an invisible shadow."
author                                  "Ian Manion (Vulcan)"
organisation                            "Ianz Trainz"
contact-website                         "http://www.ianztrainz.com/index.html"
license                                 "This file is released free of charge for you to use. You may not host on a webserver or redistribute the model without my permission, and if permitted, only as long as you do not do so for profit. This licence file must be included with any permitted redistribution. Copyright of the model and original textures remains with Ian Manion (Vulcan)."
kuid-table
{
  enginespec                            <kuid2:60238:51035:1>
  hornsound                             <kuid2:60238:54027:1>
  interior                              <kuid2:60238:55015:1>
  bogey                                 <kuid:-10:149>
  enginesound                           <kuid2:60238:53049:1>
  corona_green                          <kuid2:60238:1000023:1>
  corona_red                            <kuid2:60238:1000021:1>
  passenger                             <kuid:-3:10060>
}

Файлы:

aircraft163.gse	3.1 kB
body
body / base.im	1.5 kB
body / base01.im	1.5 kB
body / elevator.im	6.5 kB
body / env_metal.texture.txt	32 B
body / door.im	20.6 kB
body / elevator.kin	7.2 kB
body / base01.kin	10.8 kB
body / flashers.im	1.5 kB
body / base.kin	10.8 kB
body / flaps.im	4.7 kB
body / glass.texture.txt	28 B
body / green_glass.texture.txt	34 B
body / door.kin	14.9 kB
body / glass.tga	13.0 kB
body / env_metal.bmp	12.1 kB
body / flaps.kin	10.8 kB
body / body.im	232.1 kB
body / pilot_army.texture.txt	33 B
body / piper_cub3.texture.txt	33 B
body / green_glass.tga	13.0 kB
body / prop2-prop2.texture.txt	45 B
body / pilot_front.im	28.7 kB
body / pilot_rear.im	28.7 kB
body / prop2_comp.im	9.8 kB
body / prop2_comp.kin	5.9 kB
body / prop2_timber.im	8.0 kB
body / propdisk.im	1.4 kB
body / prop2_timber.kin	5.9 kB
body / pilot_army.tga	193.0 kB
body / propeller-prop.texture.txt	48 B
body / propdisk.kin	10.8 kB
body / prop2.bmp	192.1 kB
body / prop.bmp	192.1 kB
body / prop2.tga	193.0 kB
body / propeller.texture.txt	32 B
body / shadowblack.texture.txt	34 B
body / shadowblack.tga	1.8 kB
body / rudder.im	6.1 kB
body / rudder.kin	7.2 kB
body / wheels.im	53.0 kB
body / wheels.kin	47.7 kB
body / propeller.tga	193.0 kB
body / piper_cub3.tga	3.0 MB
preview.jpg	15.1 kB
engine.wav	336.8 kB
shadow
shadow / shadowblack.texture.txt	34 B
shadow / shadow_inv.im	1.3 kB
shadow / shadowblack.tga	1.8 kB
shadow / shadow.im	12.1 kB
tyres.wav	57.0 kB
stop.wav	110.4 kB
wheel_motor.wav	497.3 kB
start.wav	698.0 kB
Общий объём файлов:	6.2 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:60238:9901:1>	traincar	Piper Cub J-3 Military Startup	3.5	12.06.2020 19:25:10	2.8 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-10:149>	#-10	bogey	Тележка_невидимая	0	18.04.2023 0:03:42	1.4 kB
<kuid:-3:10060>	#-3	product	Passengers	2.9	12.06.2020 2:08:26	10.3 MB
<kuid2:60238:51035:1>	#60238	engine	Piper Cub Engine config	3.5	12.06.2020 19:16:41	15.4 kB
<kuid2:60238:53049:1>	#60238	enginesound	Piper Cub Engine Sound Startup	3.5	12.06.2020 19:25:14	5.1 MB
<kuid2:60238:54027:1>	#60238	hornsound	Silent Horn Sound for Helicopters	2.7	12.06.2020 19:16:45	8.1 kB
<kuid2:60238:55015:3>	#60238	interior	Canal Boat 1 Interior	2.4	8.01.2018 22:54:43	13.5 kB
<kuid2:60238:1000021:2>	#60238	mesh	Aircraft Flasher Red Mesh	2.6	12.06.2020 19:19:59	8.0 kB
<kuid2:60238:1000023:2>	#60238	mesh	Aircraft Flasher Green Mesh	2.6	12.06.2020 19:17:37	7.7 kB
Всего связей: 8, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет