<kuid:60002:100090> B&M 1101 Interior

Тип: Кабина
Опубликовано: 23.07.2020 20:57:06
Скачиваний: 13
Размер: 1.9 MB

Скачать

Auran SW controls modified for
high hood (HH) and exterior-from-cab

config.txt:

username                                "B&M 1101 Interior"
kind                                    "interior"
cameradefault                           0
category-era                            "1950s"
category-region                         "US"
category-class                          "ZX"
trainz-build                            2.9
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
author                                  "Auran shelled by PWeiser"
description                             "Auran SW controls modified for
 high hood (HH) and exterior-from-cab"
outside-visible-from-cabin              1
license                                 "Original aspects free for any use whatever, meshes are Auran's."
organisation                            "Auran and Homemade"
cameralist
{
  camera0                               -0.558,0.515,0.5,0.055,-0.123
  camera1                               -0.796,0.461,0.5,0.244,-0.693
  camera2                               -0.431,0.486,0.5,-3.14,0
  camera3                               -0.432,1.326,0.2,-3.14,0
  camera4                               1.576,0.114,0.5,-3.14,0
  camera5                               -0.15,1.02,0.4,-0.124,-0.299
  camera6                               1.576,0.114,0.5,0,0
  camera7                               1.576,-9.1,0.2,0,0
  camera8                               -0.804,0.481,0.4,0.121,-0.45
}
mesh-table
{
  default
  {
    mesh                                "main.im"
    auto-create                         1
  }
  switch0
  {
    kind                                "lever"
    mesh                                "switch.im"
    auto-create                         1
    att                                 "a.switch0"
    limits                              0,1
    angles                              1.4,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    onlight                             "switchlight0"
    att-parent                          "default"
  }
  switch1
  {
    kind                                "lever"
    mesh                                "switch.im"
    auto-create                         1
    att                                 "a.switch1"
    limits                              0,1
    angles                              1.4,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
  }
  switch2
  {
    kind                                "lever"
    mesh                                "switch.im"
    auto-create                         1
    att                                 "a.switch2"
    limits                              0,1
    angles                              1.4,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
  }
  switch3
  {
    kind                                "lever"
    mesh                                "switch.im"
    auto-create                         1
    att                                 "a.switch3"
    limits                              0,1
    angles                              1.4,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
  }
  switch4
  {
    kind                                "lever"
    mesh                                "switch.im"
    auto-create                         1
    att                                 "a.switch4"
    limits                              0,1
    angles                              1.4,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
  }
  switch5
  {
    kind                                "lever"
    mesh                                "switch.im"
    auto-create                         1
    att                                 "a.switch5"
    limits                              0,1
    angles                              1.4,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
  }
  switch6
  {
    kind                                "lever"
    mesh                                "switch.im"
    auto-create                         1
    att                                 "a.switch6"
    limits                              0,1
    angles                              1.4,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
  }
  switch7
  {
    kind                                "lever"
    mesh                                "switch.im"
    auto-create                         1
    att                                 "a.switch7"
    limits                              0,1
    angles                              1.4,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
  }
  switch8
  {
    kind                                "lever"
    mesh                                "switch.im"
    auto-create                         1
    att                                 "a.switch8"
    limits                              0,1
    angles                              1.4,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
  }
  switch9
  {
    kind                                "lever"
    mesh                                "switch.im"
    auto-create                         1
    att                                 "a.switch9"
    limits                              0,1
    angles                              1.4,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
  }
  independantbrake_lever
  {
    kind                                "lever"
    mesh                                "loco_brake_lever.im"
    auto-create                         1
    att                                 "a.loco_brake_lever"
    limits                              0,32
    angles                              0.94,0
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,1
    radius                              0.15
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    mesh                                "train_brake_lever.im"
    auto-create                         1
    att                                 "a.train_brake_lever"
    limits                              0,4
    angles                              1.2,0.25
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              0.15
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser_lever.im"
    auto-create                         1
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0,-0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle_lever.im"
    auto-create                         1
    att                                 "a.throttle_lever"
    limits                              0,8
    angles                              -0.47,0.47
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.headlight_switch"
    auto-create                         1
    mesh                                "headlight_switch.im"
    limits                              0,1
    angles                              -2,2
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "whitepress_needle.im"
    auto-create                         1
    att                                 "a.equaliser_pressure"
    limits                              0,1000
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "redpress_needle.im"
    auto-create                         1
    att                                 "a.main_res_pressure"
    limits                              0,1000
    angles                              0,2.12058
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "whitepress_needle.im"
    auto-create                         1
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "redpress_needle.im"
    auto-create                         1
    att                                 "a.brake_pipe_pressure"
    limits                              0,1000
    att-parent                          "default"
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "clock_hour_needle.im"
    auto-create                         1
    att                                 "a.ammeter"
    limits                              0,1500
    angles                              0,4.5
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "speedo_needle.im"
    auto-create                         1
    att                                 "a.speedo"
    limits                              0,48
    att-parent                          "default"
  }
  horn
  {
    kind                                "pullrope"
    mesh                                "horn.im"
    auto-create                         1
    att                                 "a.horn"
    limits                              0,1
    angles                              0.1,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
  }
  wheelslip_light
  {
    kind                                "light"
    mesh                                "wheelslip.im"
    auto-create                         1
    att-parent                          "default"
  }
  brake_base
  {
    mesh                                "brake_base.im"
    auto-create                         1
  }
  speedo_ammeter
  {
    mesh                                "speedo_ammeter.im"
    auto-create                         1
  }
}
kuid                                    <kuid:60002:100090>
kuid-table
{
}

Файлы:

ammeter.texture.txt	30 B
ammeter.tga	192.0 kB
black-light_op.texture.txt	90 B
black-light_op.tga	16.0 kB
black.texture.txt	28 B
black.tga	12.0 kB
black_handle.texture.txt	35 B
black_handle.tga	12.0 kB
bonnet.im	28.7 kB
bonnet.texture.txt	29 B
bonnet.tga	192.0 kB
brake2.texture.txt	29 B
brake2.tga	24.0 kB
brake_base.im	14.9 kB
brake_base.texture.txt	33 B
brake_base.tga	192.0 kB
brake_press.texture.txt	34 B
brake_press.tga	48.0 kB
cab.im	18.3 kB
ceiling.texture.txt	30 B
ceiling.tga	128.0 kB
clock_hour_needle.im	1.0 kB
dash.texture.txt	27 B
dash.tga	384.0 kB
dash_sides.texture.txt	33 B
dash_sides.tga	48.0 kB
env_metal.texture.txt	32 B
env_metal.tga	12.0 kB
exting_body.texture.txt	34 B
exting_body.tga	6.0 kB
exting_handle-exting_handle_op.texture.txt	122 B
exting_handle-exting_handle_op.tga	32.0 kB
fire.texture.txt	27 B
fire.tga	12.0 kB
floor_beams.texture.txt	34 B
floor_beams.tga	96.0 kB
floor_ceiling.im	6.8 kB
headlight.texture.txt	32 B
headlight.tga	12.0 kB
headlight_switch.im	3.4 kB
horn.im	1.6 kB
hornbase.texture.txt	31 B
hornbase.tga	3.0 kB
light_yellow_on-light_op.texture.txt	110 B
light_yellow_on-light_op.tga	16.0 kB
loco_brake_lever.im	3.5 kB
main.im	18.2 kB
needle_red.texture.txt	33 B
needle_red.tga	3.0 kB
needle_white.texture.txt	35 B
needle_white.tga	3.0 kB
pipes-pipes_op.texture.txt	90 B
pipes-pipes_op.tga	256.0 kB
pipes.texture.txt	28 B
pipes.tga	192.0 kB
recess.texture.txt	29 B
recess.tga	48.0 kB
redpress_needle.im	548 B
reverser_base.texture.txt	36 B
reverser_base.tga	6.0 kB
reverser_lever.im	3.4 kB
rope.texture.txt	27 B
rope.tga	6.0 kB
signs.texture.txt	28 B
signs.tga	6.0 kB
sill.texture.txt	27 B
sill.tga	24.0 kB
sound
sound / air_horn_3.wav	177.1 kB
sound / cabin.txt	348 B
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / lever_5.wav	18.3 kB
sound / notch_1.wav	2.8 kB
sound / reverser.wav	10.4 kB
sound / switch_6.wav	11.6 kB
sound / throttle.wav	4.0 kB
speedo.texture.txt	29 B
speedo.tga	192.0 kB
speedo_ammeter.im	8.2 kB
speedo_cyl.texture.txt	33 B
speedo_cyl.tga	48.0 kB
speedo_needle.im	1.2 kB
sw7window.texture.txt	32 B
sw7window.tga	192.0 kB
sw7_caba.texture.txt	31 B
sw7_caba.tga	1.0 MB
sw7_cabb.texture.txt	31 B
sw7_cabb.tga	512.0 kB
switch.im	1.3 kB
switch.texture.txt	29 B
switch.tga	1.5 kB
switchlight.tga	1.5 kB
throttle_base.texture.txt	36 B
throttle_base.tga	192.0 kB
throttle_lever.im	3.4 kB
throttle_top.texture.txt	35 B
throttle_top.tga	3.0 kB
thumbnail.jpg	13.8 kB
timber_handle.texture.txt	36 B
timber_handle.tga	12.0 kB
train_brake_lever.im	3.4 kB
wheelslip.im	544 B
whitepress_needle.im	548 B
window.im	4.6 kB
Общий объём файлов:	4.5 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:60002:100090>	interior	B&M 1101 Interior	2.9	23.07.2020 20:57:06	1.9 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:60002:100091>	#60002	traincar	B&M 1101	2.9	23.07.2020 21:11:51	1.0 MB
<kuid:60002:100093>	#60002	traincar	B&M 1101 - 2nd Scheme	2.9	23.07.2020 20:45:24	1.1 MB
<kuid:60002:100094>	#60002	traincar	B&M 1101 - 3rd Scheme	2.9	12.07.2020 22:36:37	1.1 MB
<kuid:60002:100095>	#60002	traincar	B&M 1161 (1101) - 4th Scheme	2.9	23.07.2020 19:44:41	1.1 MB
<kuid:60002:100096>	#60002	traincar	B&M 1161 (1101) - 5th Scheme	2.9	23.07.2020 20:33:47	1.1 MB
<kuid:60002:100098>	#60002	traincar	B&M 1162 - 1st Scheme	2.9	23.07.2020 20:34:55	1.1 MB
<kuid:60002:100100>	#60002	traincar	B&M 1162 - 2nd Scheme	2.9	23.07.2020 19:43:27	1.1 MB
<kuid:60002:100101>	#60002	traincar	B&M 1162 - 3rd Scheme	2.9	23.07.2020 21:05:53	1.1 MB
<kuid:60002:100102>	#60002	traincar	B&M 1162 - 4th Scheme	2.9	23.07.2020 20:47:53	1.1 MB