<kuid2:45324:90103:2> dash2 cab high hood shf

Тип: Кабина
Опубликовано: 2.08.2020 10:25:36
Скачиваний: 85
Размер: 13.2 MB

Скачать

EMD cab base for Jointed Rail dash 2 series locomotives. High hood with short hood situated as front.
THIS ASSET WILL NOT WORK PROPERLY WITHOUT THE DEPENDANT PAYWARE ASSETS FROM JOINTEDRAIL.COM AND IS NOT SUPPORTED AS SUCH

config.txt:

username                                "dash2 cab high hood shf"
kuid                                    <kuid2:45324:90103:2>
kind                                    "interior"
trainz-build                            3.5
category-era                            "1970s;1980s;1990s;2000s"
category-region                         "US;CA"
category-class                          "ZI"
description                             "EMD cab base for Jointed Rail dash 2 series locomotives. High hood with short hood situated as front.
																				 THIS ASSET WILL NOT WORK PROPERLY WITHOUT THE DEPENDANT PAYWARE ASSETS FROM JOINTEDRAIL.COM AND IS NOT SUPPORTED AS SUCH"
author                                  "Justin Cornell (norfolksouthern37)"
contact-email                           "justin@jointedrail.com"
contact-website                         "www.jointedrail.com"
license                                 "EULA The mesh file(s), textures, and 
associated files contained in this distribution are copyright 2009-2012 under 
universal copyright law.  Any distribution or alteration of these files other 
than by the original author (norfolksouthern37, Justin Cornell, or Jointed Rail) 
is prohibited. Under no circumstances is this content to be released under 
another author KUID without permission. NO public reskins of payware items are 
allowed. If you are in posession of these files and are using them in an illegal 
copy of Auran's Trainz, you are in violation of this EULA and as such, even 
without reading this file, have given full expressed permission for your local 
or national law enforcement agencies to sieze said computer equipment that may 
be used in the storage or distribution of these products for the express purpose 
of protecting these products' copyrights.  This document is permission to sieze 
and detain any materials used for the illegitimate operation and/or distribution 
of these products. These contained files are provided 'as- is' with no guarantee 
either expressed or implied as to their fitness for use with Auran Trainz or any 
other product on your machine.  Neither Auran, nor Jointed Rail is responsible 
for anything that may happen to your computer or information on your computer, 
or through those items to any of your or anyone else's posessions. The exclusion 
of other articles of GNU international copyright law is NOT an indication of 
inapplicability of those laws.  NO OTHER STATEMENTS EXCLUDING AURAN EULA APPLY!"
cameralist
{
  camera0                               -1.305,-0.052,0.424,-12.378,-0.174
  camera1                               -1.083,-0.236,0.423,-5.709,-0.526
  camera2                               -1.226,-0.759,0.46,-6.245,-0.111
  camera3                               1.306,0.062,0.393,-7.546,-0.231
  camera4                               0.226,0.445,0.475,-12.593,-0.065
  camera5                               1.254,-0.412,0.343,-6.273,-0.077
  camera6                               1.209,0.888,0.409,-6.271,-0.045
  camera7                               1.275,0.318,0.343,-9.352,-0.092
  camera8                               -1.226,0.553,0.393,-3.133,-0.151
}
script                                  "SignalInterior"
class                                   "SignalInterior"
cameradefault                           0
thumbnails
{
  0
  {
    width                               240
    height                              180
    image                               "art_icon.tga"
  }
}
mesh-table
{
  default
  {
    mesh                                "c_interior.im"
    auto-create                         1
    effects
    {
      shell_fwd
      {
        kind                            "attachment"
        att                             "a.cabfront"
      }
      shell_rev
      {
        kind                            "attachment"
        att                             "a.cabfront"
      }
    }
  }
  wheelslip_light
  {
    kind                                "light"
    mesh                                "wheelslip_light.im"
    auto-create                         0
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle.im"
    att                                 "a.throttle"
    limits                              0,8
    angles                              0,1.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.25
    mousespeed                          -1
    auto-create                         1
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    mesh                                "dynamic_handle.im"
    att                                 "a.dynamic"
    limits                              0,2
    angles                              0,-1.69
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          -1
    radius                              0.25
    auto-create                         1
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "trainbrake_handle.im"
    att                                 "a.trainbrake_handle"
    limits                              0,4
    angles                              0,-2
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              0.25
    mousespeed                          1
  }
  independantbrake_lever
  {
    kind                                "lever"
    mesh                                "indy_handle.im"
    att                                 "a.ind"
    limits                              0,32
    angles                              0.94,0
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.25
    mousespeed                          1
    auto-create                         1
  }
  flow_needle
  {
    kind                                "needle"
    mesh                                "flowneedle.im"
    att                                 "a.bpflow"
    limits                              0,1050
    auto-create                         1
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "brakeneedlered.im"
    att                                 "a.mainres"
    limits                              0,1240
    auto-create                         1
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "brakeneedle.im"
    att                                 "a.eqres"
    limits                              0,1240
    auto-create                         1
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "brakeneedlered.im"
    att                                 "a.brakecyl"
    limits                              -50,1390
    auto-create                         1
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "brakeneedle.im"
    att                                 "a.brakepipe"
    limits                              0,1240
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "speedo_needle.im"
    att                                 "a.speedo"
    limits                              0,40
    auto-create                         1
  }
  load_needle
  {
    kind                                "needle"
    mesh                                "needleamps.im"
    att                                 "a.ampmeter"
    limits                              -1000,1650
    angles                              0,4.24
    auto-create                         1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser_handle.im"
    att                                 "a.throttle01"
    limits                              0,2
    angles                              0.55,-0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          -1
    auto-create                         1
  }
  right_sliding_window
  {
    mesh                                "window1.im"
    auto-create                         1
    att                                 "a.window1"
    att-parent                          "default"
    limits                              0,1
    angles                              0,-0.009
    notches                             0,1
    notchheight                         1,1
    kind                                "lever"
  }
  right_sliding_window2
  {
    mesh                                "window2.im"
    auto-create                         1
    att                                 "a.window2"
    att-parent                          "default"
    limits                              0,1
    angles                              0,0.009
    notches                             0,1
    notchheight                         1,1
    kind                                "lever"
    mousespeed                          -1
  }
  left_sliding_window
  {
    mesh                                "window3.im"
    auto-create                         1
    att                                 "a.window3"
    att-parent                          "default"
    limits                              0,1
    angles                              0,-0.009
    notches                             0,1
    notchheight                         1,1
    kind                                "lever"
    mousespeed                          -1
  }
  left_sliding_window2
  {
    mesh                                "window4.im"
    auto-create                         1
    att                                 "a.window4"
    att-parent                          "default"
    limits                              0,1
    angles                              0,0.009
    notches                             0,1
    notchheight                         1,1
    kind                                "lever"
    mousespeed                          1
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.hdlt"
    mesh                                "hdltswtch.im"
    limits                              0,1
    angles                              0,2
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          -1
    auto-create                         1
  }
  horn
  {
    kind                                "pulllever"
    mesh                                "horn.im"
    att                                 "a.horn"
    auto-create                         1
    angles                              0,-0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
}
kuid-table
{
}

Файлы:

art_icon.tga	127.6 kB
brakeneedle.im	4.3 kB
brakeneedlered.im	4.3 kB
c_interior.im	15.5 kB
c_interior.im.attachment.txt	4.3 kB
db_slider.texture.txt	32 B
db_slider.tga	49.0 kB
dynamic_handle.im	31.8 kB
env_metal.texture.txt	32 B
env_metal.tga	3.0 kB
flowneedle.im	586 B
hdltswtch.im	6.3 kB
horn.im	20.9 kB
indy_handle.im	18.6 kB
main copy.texture.txt	32 B
main copy.tga	12.0 MB
main2 copy.texture.txt	33 B
main2 copy.tga	12.0 MB
main_nrmspec-main_nrmspec.texture.txt	84 B
main_nrmspec.tga	16.0 MB
needleamps.im	4.2 kB
notch_indicator.texture.txt	29 B
notch_indicator.tga	48.0 kB
platform copy.texture.txt	36 B
platform copy.tga	12.0 kB
platform_normalspec.texture.txt	98 B
platform_normalspec.tga	12.0 kB
recess.texture.txt	29 B
recess.tga	12.0 kB
reverser_handle.im	10.3 kB
signalinterior.gs	7.3 kB
sound
sound / brakehandle.wav	11.7 kB
sound / brakes.wav	13.3 kB
sound / cabin.txt	182 B
sound / rutnut.wav	66.4 kB
sound / throttle.wav	9.1 kB
speedo.texture.txt	29 B
speedo.tga	97.0 kB
speedo_needle.im	2.2 kB
speedo_pointer.im	688 B
throttle.im	31.8 kB
trainbrake_handle.im	23.6 kB
wheelslip_light.im	640 B
window1.im	14.2 kB
window2.im	8.4 kB
window3.im	14.2 kB
window4.im	8.4 kB
windows copy.texture.txt	35 B
windows copy.tga	768.0 kB
windows.texture.txt	30 B
windows.tga	768.0 kB
wondowframe.texture.txt	34 B
wondowframe.tga	768.0 kB
Общий объём файлов:	42.9 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:45324:90103:2>	interior	dash2 cab high hood shf	3.5	2.08.2020 10:25:36	13.2 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет