VR 2 Position Semaphore Signals - Post #6 (Lilydale 1913) Home Timber Mast 1 Disc LHS
From approximately 1890, the Victorian Railways adopted a 'GNR' (Great Northern Railway, UK) Somersault style semaphore signal, produced by McKenzie and Holland. These signals eventually covered much of the country, and suburban, network, with a very small number still in use on the network today (including some still in use at Frankston). There were, however, many design changes over their lifetime, including different mast designs (including timber, lattice and 'scalean'), and different 'distant' signal designs. As part of the VR's signaling, there were also 'disc' signals for shunting, many of which were mounted on masts for visibility.
This set of VR 2 Position Somersault Semaphore signals covers a range of generic signals, including 3 different major mast types, various bracket and junction signals, and various disc and home signal combinations. Also included as some example of custom placed signals for specific yards (mostly those intended for the Healesville line). All junction signals are controlled by the 'Sig T' objects created by Bloodnok.
This model represents Post #6 at Lilydale (1913), which was a timber mast home signal, with a single disc signal on the left side of the mast. This signal is offset due to the yard tracks in Lilydale. The disc signal acts as part of the 'junction home' signal at this time, due to constraints within Trainz.
Much thanks goes to Jerker and JetStreamSky for the original VR semaphore signals. Although these meshes are essentially new built, they are still based upon models by Jerker and JetStreamsky.
Also much thanks to Bloodnok for his signal scripts and extensive assistance with their setup, without which this project would not have been possible.
These signals are very similar to those used in New Zealand, Great Britain, and also on some other railways in Australia (e.g. the Emu Bay Railway in Tasmania).
Тип: Сигнал