<kuid:917000:100018> Interior for SD70ACe S.A.R

Тип: Кабина
Опубликовано: 18.10.2021 19:35:49
Скачиваний: 64
Размер: 19.3 MB

Скачать

Interior for AS70ACe Unlettered.

config.txt:

username                                "Interior for SD70ACe S.A.R"
kind                                    "interior"
cameradefault                           0
description                             "Interior for AS70ACe Unlettered."
trainz-build                            2.9
script                                  "gevocabin"
class                                   "GEVOCabin"
author                                  "davesnow"
category-region                         "AT"
category-era                            "1990s"
category-class                          "ZX"
license                                 "This item is supplied free of charge for personal use by registered users of Trainz. It or its contents must not be modified, offered for sale or supplied as any part of a Payware package or provided for downloading on any site other than Auran unless this is expressly permitted in writing by the author davesnow / David E. Snow.


DISCLAIMER: It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item."
cameralist
{
  camera0                               -1.105,-6.75,4.125,-0,-0
  camera1                               -1.076,-6.986,3.959,-1.109,0
  camera2                               -1.12,-6.928,4.243,-3.129,-0.106
  camera3                               0.69,-6.357,4.186,-6.273,0
  camera4                               0.415,-8.183,4.186,-6.233,0
  camera5                               0.29,-8.394,3.581,-7.466,-0.418
  camera6                               0,-8.571,3.461,-9.471,0
  camera7                               1.028,-6.976,4.106,-12.581,-0.181
  camera8                               1.136,-7.099,3.979,-11.463
  camera9                               1.032,-7.02,4.156,-9.784,-0.139
  camera10                              -0.337,-6.191,4.265,-6.472,-0
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
mesh-table
{
  default
  {
    mesh                                "Interior.im"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle_lever.im"
    att                                 "a.throttle_lever"
    limits                              0,8
    angles                              -0.43,0.44
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.37
    mousespeed                          -1
    auto-create                         1
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Train_Brake_Lever.im"
    att                                 "a.trainbrake_handle"
    limits                              0,4
    angles                              0.94,0
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,2,2,2
    mousespeed                          -1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser_lever.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.69,-0.69
    notches                             0,0.5,1
    notchheight                         1,1,1
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Independent_Brake_Lever.im"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              0.94,0
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.15
    mousespeed                          -1
    att-parent                          "default"
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    mesh                                "dynamic_brake_lever.im"
    att                                 "a.dynamic"
    limits                              0,2
    angles                              0,-0.7
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.35
    auto-create                         1
    att-parent                          "default"
  }
  horn
  {
    kind                                "pulllever"
    mesh                                "Horn_Lever.im"
    att                                 "a.horn"
    auto-create                         1
    angles                              -0,0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  horn2
  {
    kind                                "button"
    mesh                                "horn.im"
    att                                 "a.horn0"
    auto-create                         1
    angles                              -0,0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.switch0"
    mesh                                "Switch_HDlts.im"
    limits                              0,1
    angles                              0,2
    notches                             1,0
    notchheight                         0.1,0.1
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "digital-dial-spd"
    att                                 "a.digispeedo0"
    mesh                                "digitalreadout01.im"
    font                                "impact"
    fontsize                            0.01
    fontcolor                           255,255,255
    auto-create                         1
  }
  speedo_needle2
  {
    kind                                "needle"
    mesh                                "speedometer_needle.im"
    att                                 "a.speedo_needle0"
    limits                              0,33
    auto-create                         1
  }
  speedo_needle3
  {
    kind                                "digital-dial-spd"
    att                                 "a.digispeedo01"
    mesh                                "digitalreadout01.im"
    font                                "arial"
    fontsize                            0.02
    fontcolor                           150,0,100
    auto-create                         1
  }
  window_right_front
  {
    kind                                "lever"
    mesh                                "Window_Right_Front.im"
    att                                 "a.windowRtFt0"
    limits                              0,32
    angles                              0.0104,-0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_front
  {
    kind                                "lever"
    mesh                                "Window_Left_Front.im"
    att                                 "a.windowLfFt0"
    limits                              0,32
    angles                              -0.0104,0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_right_rear
  {
    kind                                "lever"
    mesh                                "Window_Right_Back.im"
    att                                 "a.windowRtRr0"
    limits                              0,32
    angles                              -0.0107,0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_rear
  {
    kind                                "lever"
    mesh                                "Window_Left_Back.im"
    att                                 "a.windowLfRr0"
    limits                              0,32
    angles                              0,0.0107
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
}
kuid                                    <kuid:917000:100018>
kuid-table
{
}

Файлы:

alpha objects-alpha objects.texture.txt	61 B
back wall accessories.texture.txt	44 B
controls art 01.texture.txt	38 B
sound
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / lever_5.wav	18.3 kB
sound / notch_1.wav	2.8 kB
sound / light_switch.wav	30.4 kB
sound / reverser.wav	10.4 kB
sound / throttle.wav	4.0 kB
sound / switch_6.wav	11.6 kB
sound / air_horn_3.wav	177.1 kB
sound / window.wav	74.0 kB
sound / cabin.txt	604 B
$screenshot$.jpg	44.2 kB
decals.texture.txt	29 B
digitalreadout01.im	1.3 kB
digitalreadout02.im	1.3 kB
dynamic_brake_lever.im	11.9 kB
gevocabin.gs	620 B
horn.im	1.1 kB
horn_lever.im	10.7 kB
independent_brake_lever.im	9.1 kB
interior cab 01.texture.txt	38 B
interior cab 02.texture.txt	38 B
interior cab 03.texture.txt	38 B
interior cab 04.texture.txt	38 B
loco art.texture.txt	31 B
reflection art.texture.txt	37 B
reverser_lever.im	7.2 kB
speedometer_needle.im	2.5 kB
switch_hdlts.im	7.3 kB
throttle_lever.im	12.0 kB
train_brake_lever.im	9.1 kB
window art.texture.txt	33 B
auto start decal.tga	768.0 kB
window_left_back.im	3.3 kB
window_left_front.im	2.8 kB
window_right_front.im	2.8 kB
window_right_back.im	3.5 kB
cow catcher.texture.txt	34 B
reflection art.tga	768.0 kB
auto start decal.texture.txt	39 B
interior walls cab.texture.txt	41 B
alpha objects.tga	256.0 kB
interior.im	1.4 MB
window art.tga	3.0 MB
loco art.tga	2.6 MB
cow catcher.tga	4.0 MB
interior cab 02.tga	3.0 MB
interior cab 03.tga	12.0 MB
back wall accessories.tga	12.0 MB
interior cab 04.tga	12.0 MB
decals.tga	3.0 MB
interior walls cab.tga	12.0 MB
interior cab 01.tga	12.0 MB
controls art 01.tga	12.0 MB
Общий объём файлов:	91.2 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:917000:100018:1>	interior	Interior for SD70ACe S.A.R	3.7	17.05.2023 0:41:22	19.3 MB
<kuid:917000:100018>	interior	Interior for SD70ACe S.A.R	2.9	18.10.2021 19:35:49	19.3 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:917000:100016>	#917000	traincar	EMD SD70ACe Saudi Arabian Railways	2.9	18.10.2021 20:44:12	9.8 MB
<kuid2:917000:100016:1>	#917000	traincar	EMD SD70ACe Saudi Arabian Railways	3.7	17.05.2023 0:40:59	9.7 MB