<kuid2:833171:101298:1> Interior ED4M

Тип: Кабина
Опубликовано: 20.04.2023 4:46:23
Скачиваний: 113
Размер: 10.9 MB
Скачать

Interior for ED4M
config.txt:
username                                "Interior ED4M"
category-class                          "ZI"
category-region                         "RU"
category-era                            "2010s"
cameradefault                           6
description                             "Interior for ED4M"
kind                                    "interior"
author                                  "3d модель и текстуры: Dimaas, фотоматериал: Dimaas,ed4m"
trainz-build                            3.7
interior-controls-type                  "full"
cameralist
{
  camera0                               0.836,0.032,1.51,0.044,-0.142
  camera1                               0.331,0.506,1.492,-12.507,-0.257
  camera2                               -0.281,-0.482,1.134,-12.466,-1.434
  camera3                               -0.744,0.295,1.471,-12.579,-0.086
  camera4                               -1.099,0.078,0.774,-13.127,-0.61
  camera5                               -1.024,0.044,1.6,3.153,-0.328
  camera6                               0.82,0.58,1.743,0,-0.09
}
mesh-table
{
  default
  {
    mesh                                "cab_03x.im"
    auto-create                         1
  }
  bil_track_st
  {
    mesh                                "bil_track_st.im"
    att                                 "a.bil_spd_current01"
    auto-create                         1
  }
  bil_track_dv
  {
    mesh                                "bil_track_dv.im"
    att                                 "a.bil_spd_current01"
    auto-create                         1
  }
  bil_accel
  {
    mesh                                "rev_fwd.im"
    att                                 "a.bil_spd_max01"
    auto-create                         1
  }
  bil_decel
  {
    mesh                                "rev_back.im"
    att                                 "a.bil_spd_max01"
    auto-create                         1
  }
  bil_mode_p
  {
    mesh                                "bil_mode_p.im"
    att                                 "a.bil_light_p"
    auto-create                         1
  }
  bil_mode_m
  {
    mesh                                "bil_mode_m.im"
    att                                 "a.bil_light_m"
    auto-create                         1
  }
  bil_kp_ready
  {
    mesh                                "kr_wr.im"
    att                                 "a.bil_light_kr_wr"
    auto-create                         1
  }
  bil_rmp
  {
    mesh                                "knopki/bil_rmp.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.001
    notches                             0,1
    notchheight                         0,0
  }
  bil_vk
  {
    mesh                                "knopki/bil_vk.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.001
    notches                             0,1
    notchheight                         0,0
  }
  bil_f
  {
    mesh                                "knopki/bil_f.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.001
    notches                             0,1
    notchheight                         0,0
  }
  bil_0
  {
    mesh                                "knopki/0.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_1
  {
    mesh                                "knopki/1.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_2
  {
    mesh                                "knopki/2.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_3
  {
    mesh                                "knopki/3.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_4
  {
    mesh                                "knopki/4.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_5
  {
    mesh                                "knopki/5.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_6
  {
    mesh                                "knopki/6.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_7
  {
    mesh                                "knopki/7.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_8
  {
    mesh                                "knopki/8.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_9
  {
    mesh                                "knopki/9.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_up
  {
    mesh                                "knopki/up.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_down
  {
    mesh                                "knopki/down.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_k
  {
    mesh                                "knopki/k.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_l
  {
    mesh                                "knopki/l.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_o
  {
    mesh                                "knopki/o.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_i
  {
    mesh                                "knopki/i.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_p
  {
    mesh                                "knopki/p.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_plus
  {
    mesh                                "knopki/plus.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_minus
  {
    mesh                                "knopki/minus.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_otpr
  {
    mesh                                "knopki/otpr.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_podt
  {
    mesh                                "knopki/podt.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_os
  {
    mesh                                "knopki/oc.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_k20
  {
    mesh                                "knopki/k20.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bplocomain_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_red.im"
    att                                 "a.needle-red"
    limits                              0,2100
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_black.im"
    att                                 "a.needle01"
    limits                              0,1800
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_black.im"
    att                                 "a.needle"
    limits                              0,1600
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_red.im"
    att                                 "a.needle-red01"
    limits                              0,1800
    att-parent                          "default"
  }
  cab_voltmeter
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "kw_ed.im"
    att                                 "a.kw"
    limits                              0,4100
    angles                              0,4
    att-parent                          "default"
  }
  omivatel
  {
    mesh                                "omyv_klava/knopka_omyv.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_omyv"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  buso_kn_wip_m
  {
    mesh                                "omyv_klava/knopka_wip_m.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_omyv"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  buso_kn_wip_pom
  {
    mesh                                "omyv_klava/knopka_wip_pom.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_omyv"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  left_door_otkr
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_door-left"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  right_door_otkr
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_door-right"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  dveri_mash_lev
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_ldoor_mash"
    angles                              0.8,-0.3
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  dveri_mash_prav
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_rdoor_mash"
    angles                              0.8,-0.3
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  dveri_pom_lev
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_ldoor_kond"
    angles                              0.8,-0.3
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  dveri_pom_prav
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_rdoor_kond"
    angles                              0.8,-0.3
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  torm_comb
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka_black.im"
    att                                 "a.knopka_torm"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.01
  }
  saut
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "per_plast.im"
    att                                 "a.per_saut"
    angles                              -0.5,0.25
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          10
  }
  buso
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "per_plast.im"
    att                                 "a.per_avarinoe"
    angles                              -0.5,0.25
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          10
  }
  osv_cab_low
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "per_plast.im"
    att                                 "a.per_svet"
    angles                              -0.5,0.25
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.001
    mousespeed                          10
  }
  osv_pult_reg
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka6.im"
    att                                 "a.krutilka_light-tusk"
    angles                              -2.8,2.1
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    radius                              0.01
  }
  osvpult_mach
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/knopka_podsvetki.im"
    att                                 "a.podsvetka_off01"
    angles                              0.35,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          -1
  }
  osvpult_pom
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/knopka_podsvetki.im"
    att                                 "a.podsvetka_off02"
    angles                              0.35,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          -1
  }
  vkl_upr
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka_f.im"
    att                                 "a.krutilka_on"
    angles                              -0.8,0.8
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          2
  }
  pant_up
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka_black.im"
    att                                 "a.pantograph_lever"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
  }
  pant_down
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka_red.im"
    att                                 "a.knopka_pant-down"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
  }
  avar_ept
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka_black.im"
    att                                 "a.knopka_ept"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  otpusk
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka_black.im"
    att                                 "a.knopka_otpusk"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.001
  }
  throttle_lever
  {
    mesh                                "kontroller.im"
    auto-create                         1
    kind                                "lever"
    att                                 "a.thottle_lever"
    limits                              0,8
    angles                              0,1.5
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.9,1
    notchheight                         1,1,1,1,1,1,1,1,1
    radius                              0.1
    att-parent                          "default"
    mousespeed                          0.07
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "reversor.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              -0.55,0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          1
    att-parent                          "default"
    radius                              0.1
  }
  rb_1
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb02"
    limits                              0,1
    angles                              0,-0.003
    mousespeed                          10
    notchheight                         0,0
  }
  perekl_proj
  {
    kind                                "lever"
    mesh                                "knopki/krutilka1.im"
    att                                 "a.light_lever"
    auto-create                         1
    angles                              0,2
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.05
    mousespeed                          -1
  }
  bru
  {
    mesh                                "knopki/krutilka2.im"
    att                                 "a.ustavka_lever"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,4.8
    notches                             0,0.16,0.32,0.48,0.64,0.8,1
    notchheight                         2,2,2,2,2,2,2
    radius                              0.02
    mousespeed                          -0.3
  }
  av_km
  {
    mesh                                "knopki/krutilka2.im"
    att                                 "a.av_bru"
    auto-create                         1
    kind                                "lever"
    limits                              0,5
    angles                              0,2.8
    notches                             0,0.2,0.4,0.6,0.8,1
    notchheight                         2,2,2,2,2,2
    radius                              0.02
    mousespeed                          -0.3
  }
  av_rezhim
  {
    mesh                                "knopki/krutilka2.im"
    att                                 "a.av_rezhim"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              2.3,0.9
    notches                             0,1
    notchheight                         0,0
    radius                              0.02
    mousespeed                          -0.4
  }
  tiff
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka_tifon01"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  pedal
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_svistok01"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "rukoyatka-395.im"
    att                                 "a.train_brake_lever"
    limits                              0,4
    angles                              1.8,-0.1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,2,2,2,1
    radius                              0
    mousespeed                          -0.25
  }
  independantbrake_lever2
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "ruchnik.im"
    att                                 "a.ind_brake_lever"
    angles                              -3.2,0
    limits                              0,1
    att-parent                          "default"
    notches                             0,0.2,0.4,0.6,0.8,1
    notchheight                         0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.3
  }
  doors_left
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_doors_left"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  doors_right
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_doors_right"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  pusk_sio
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_radio"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.01
  }
  vozvrat
  {
    mesh                                "knopki/knopka_red.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_bv"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
  }
  kn_pesok
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_pesok"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.01
  }
  knopka_red_mach
  {
    mesh                                "knopki/knopka_red.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_podsvetka-m"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  osvpult_man
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka6.im"
    att                                 "a.krutilka_svet01"
    angles                              -4.5,0.85
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0,0,0,0,0
    radius                              0.01
  }
  osv_indik
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka6.im"
    att                                 "a.krutilka_svet02"
    angles                              -4.5,0.85
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    radius                              0.01
  }
  reg_podsv_mach
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka2.im"
    att                                 "a.krutilka_podsvetka-tusk01"
    angles                              -0.8,3.5
    limits                              -1,2
    notches                             0,0.33,0.66,1
    notchheight                         1,1,1,1
    radius                              0.01
    mousespeed                          -1
  }
  reg_podsv_pom
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka6.im"
    att                                 "a.krutilka_podsvetka-tusk02"
    angles                              -3.9,0.15
    limits                              -1,2
    notches                             0,0.3,0.7,1
    notchheight                         1,1,1,1
    radius                              0.01
  }
  osvpult_volt
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka6.im"
    att                                 "a.krutilka_svet03"
    angles                              -4.5,0.55
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    radius                              0.01
  }
  pedal_p
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_tifon02"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  sw
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_svistok02"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  rb2
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.rb01"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          1
    notchheight                         0,0
  }
  ept_on_off
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_ept"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  sign_verh
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_red_verh"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  sign_niz
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_red_niz"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  buf_right
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_right"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  buf_left
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_left"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  osv_cab_norm
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_svet_cab"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  holod
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_zapas02"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  perekl_stobogr
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_zerkalo"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  otopl_cab
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_otopl_cab"
    limits                              0,1
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  ventilacia
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_vent_cab"
    limits                              0,1
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  radio
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_radio"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  zel_svet
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_zel_svet"
    limits                              0,1
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  otkl
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_va"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -1
  }
  zapros
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka1.im"
    att                                 "a.knopka_zapros"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  povtor
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka1.im"
    att                                 "a.knopka_povtor"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  stekloobogrev
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_lobovogo"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  stekloobogrev_marchrut
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_ukazatel"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  stekloobogrev_bok
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_bokovogo"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  osv1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_svet_salona"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  obogrev_cab_norm
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_pogrev_cab_norm"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  obogrev_cab_itensiv
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_pogrev_cab_intens"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  compressor_vspom
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_dop_kompressor"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  tormozenie
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_torm"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  wipers_m
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_dvornik_m"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  wipers_p
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_dvornik_pom"
    angles                              0.5,-0.5
    notches                             0,1
    limits                              0,1
    notchheight                         1,1
    radius                              0.1
  }
  zvonok
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka1.im"
    att                                 "a.knopka_zvonok"
    limits                              0,1
    angles                              0,-0.003
    mousespeed                          10
    notches                             0,1
    notchheight                         0,0
  }
  dop_obogrev_cab
  {
    kind                                "lever"
    mesh                                "knopki/krutilka4.im"
    att                                 "a.grev_cab_dop"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0.1
    mousespeed                          5
  }
  obogrev_maslootd
  {
    kind                                "lever"
    mesh                                "knopki/krutilka3.im"
    att                                 "a.grev_maslo"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0.1
    mousespeed                          5
  }
  av_pit_alsn1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pitanie"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_alsn
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_alsn"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_svet
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_svet"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_maslootd
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_maslo"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_compressor_vspom
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_dop_kompress"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pant
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pant"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_doors
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_doors"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_lights
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_lights"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_bf_dvornik
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_bf_dvornik"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_stekloobogrev_lob
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_lobovoe"
    angles                              2,0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  av_obogrev_marshrut
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_marshrut"
    angles                              2,0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  av_stekloobogrev_bok
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_bokovoe"
    angles                              2,0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  perekl_ppt
  {
    kind                                "lever"
    mesh                                "knopki/krutilka5.im"
    att                                 "a.ppt"
    auto-create                         1
    limits                              0,1
    angles                              -0.7,0.7
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.05
    mousespeed                          -1
  }
  rb1
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb03"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          1
  }
  epk_key
  {
    kind                                "lever"
    mesh                                "knopki/krutilka_epk.im"
    att                                 "a.epk_key"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    angles                              0,1.57
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
  }
  pedal_m
  {
    mesh                                "pedal.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pesok01"
    limits                              0,1
    angles                              0,-0.3
    mousespeed                          10
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  pedal_mp
  {
    mesh                                "pedal.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pesok02"
    limits                              0,1
    angles                              0,-0.3
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.01
  }
  vu
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_VU"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  q54
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_Q54"
    angles                              0.5,-1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
    mousespeed                          1
  }
  avt_upu
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_upu"
    angles                              0.5,-1
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          1
  }
  upu_on
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_upu"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
    mousespeed                          1
  }
  stopkran
  {
    kind                                "lever"
    mesh                                "stop-kran.im"
    att                                 "a.stop-kran"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    limits                              0,1
    angles                              1.57,0
    notches                             0,1
    notchheight                         0,0
  }
  swivel_chair
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kreslo.im"
    att                                 "a.kreslo"
    limits                              -1,1
    angles                              1.8,-1.3
    radius                              0.1
    mousespeed                          0.2
    att-parent                          "default"
  }
  swivel_chair1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kreslo.im"
    att                                 "a.kreslo_pom"
    limits                              -1,1
    angles                              1.8,-1.3
    radius                              0.2
    mousespeed                          0.2
    att-parent                          "default"
  }
  chair1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "otkidnoe_sidenie.im"
    att                                 "a.otkidnoe_sidenie"
    angles                              0,-1.6
    notches                             0,1
    limits                              0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -0.5
  }
  slidingwindowr
  {
    kind                                "animated-lever"
    mesh                                "wind_r.im"
    att                                 "a.okno01"
    use-parent-bounds                   1
    auto-create                         1
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          0.5
    limits                              0,1
  }
  slidingwindowl
  {
    kind                                "animated-lever"
    mesh                                "wind_l.im"
    att                                 "a.okno02"
    use-parent-bounds                   1
    auto-create                         1
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          0.5
    limits                              0,1
  }
  blind_r
  {
    kind                                "animated-lever"
    mesh                                "shtora.im"
    att                                 "a.shtora01"
    use-parent-bounds                   1
    auto-create                         1
    mousespeed                          -0.5
    limits                              0,1
    test-collisions                     0
  }
  blind_r-collision-box
  {
    kind                                "collision-proxy"
    mesh                                "shtora_vsp.im"
    collision-parent                    "blind_r"
    att-parent                          "blind_r"
    att                                 "a.selection"
    auto-create                         1
  }
  blind_l
  {
    kind                                "animated-lever"
    mesh                                "shtora.im"
    att                                 "a.shtora02"
    use-parent-bounds                   1
    auto-create                         1
    mousespeed                          -0.5
    limits                              0,1
    test-collisions                     0
  }
  blind_l-collision-box
  {
    kind                                "collision-proxy"
    mesh                                "shtora_vsp.im"
    collision-parent                    "blind_l"
    att-parent                          "blind_l"
    att                                 "a.selection"
    auto-create                         1
  }
  r_wiper
  {
    mesh                                "dvornik.im"
    auto-create                         1
    att                                 "a.m_wip"
    anim                                "anim_dvornik.kin"
  }
  l_wiper
  {
    mesh                                "dvornik.im"
    auto-create                         1
    att                                 "a.pom_wip"
    anim                                "anim_dvornik.kin"
  }
  clear_w
  {
    mesh                                "w_clear.im"
    auto-create                         1
    att                                 "a.cab"
    att-parent                          "default"
  }
  krishka
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "krishka.im"
    att                                 "a.krishka"
    angles                              0,-2
    notches                             1,0
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -1
  }
  kran_epk_s
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kran_nm.im"
    att                                 "a.kran_epk-sin"
    angles                              0,-1.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -1
  }
  kran_epk_r
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kran_tm.im"
    att                                 "a.kran_epk-red"
    angles                              -1.7,0
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -1
  }
  nm
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kran_nm1.im"
    att                                 "a.kran_nm"
    angles                              -1.7,0
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  tm
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kran_tm.im"
    att                                 "a.kran_tm"
    angles                              -1.7,0
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  krishka_pult
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "krishka_pult.im"
    att                                 "a.krishka_pulta"
    angles                              0,0.85
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  pult
  {
    mesh                                "pult.im"
    auto-create                         1
    att                                 "a.cab"
  }
  switch202
  {
    mesh                                "intersiti_klava/is_enter.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_is"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.01
  }
  switch20
  {
    mesh                                "bk_klava/bk_e.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_bk_m"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.01
  }
  bk_f
  {
    mesh                                "bk_klava/bk_f.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_bk_m"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.01
  }
  nw
  {
    mesh                                "bk_klava/bk_d.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_bk_m"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.01
  }
  knopka_r1
  {
    mesh                                "knopki/knp_rad.im"
    att                                 "a.knopka_r1"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.001
    notches                             0,1
    notchheight                         0,0
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid2:833171:101298:1>
kuid-table
{
}
Файлы:
bk_klava
bk_klava / pult.texture.txt	30 B
bk_klava / bk_e.im	676 B
bk_klava / bk_f.im	676 B
bk_klava / bk_d.im	676 B
bil_mode_p.im	580 B
bil_track_dv.im	580 B
cab-03x.texture.txt	30 B
bil_track_st.im	580 B
intersiti_klava
intersiti_klava / detali.texture.txt	32 B
intersiti_klava / is_enter.im	676 B
cifira-cifira.texture.txt	47 B
bil_mode_m.im	580 B
detali-detali.texture.txt	29 B
knopki
knopki / 0.im	676 B
knopki / 1.im	676 B
knopki / 2.im	676 B
knopki / 3.im	676 B
knopki / 4.im	676 B
knopki / 5.im	676 B
knopki / 6.im	676 B
knopki / 7.im	676 B
knopki / 8.im	676 B
knopki / 9.im	676 B
knopki / bil_f.im	676 B
knopki / bil_rmp.im	676 B
knopki / bil_vk.im	676 B
knopki / cab-03x.texture.txt	33 B
knopki / detali.texture.txt	32 B
knopki / detali2.texture.txt	33 B
knopki / down.im	1.1 kB
knopki / i.im	676 B
knopki / k.im	676 B
knopki / k20.im	676 B
knopki / knopka1.im	7.1 kB
knopki / knopka_black.im	3.8 kB
knopki / knopka_podsvetki.im	4.8 kB
knopki / knopka_red.im	3.8 kB
knopki / knp_rad.im	724 B
knopki / krutilka1.im	6.0 kB
knopki / krutilka2.im	6.0 kB
knopki / krutilka3.im	13.3 kB
knopki / krutilka4.im	13.3 kB
knopki / krutilka5.im	5.9 kB
knopki / krutilka6.im	7.3 kB
knopki / krutilka_epk.im	8.6 kB
knopki / krutilka_f.im	6.6 kB
knopki / l.im	676 B
knopki / minus.im	1.1 kB
knopki / o.im	1.1 kB
knopki / oc.im	676 B
knopki / otpr.im	676 B
knopki / p.im	676 B
knopki / plus.im	1.1 kB
knopki / podt.im	676 B
knopki / pult.texture.txt	30 B
knopki / up.im	1.1 kB
m_upu
m_upu / lamps.texture.txt	28 B
m_upu / upu_ekran.texture.txt	32 B
m_upu / lamps.tga	512.0 kB
m_upu / upu_ekran.jpg	1.4 MB
omyv_klava
omyv_klava / knopka_omyv.im	676 B
omyv_klava / knopka_wip_m.im	676 B
omyv_klava / knopka_wip_pom.im	676 B
omyv_klava / pult.texture.txt	30 B
detali.texture.txt	29 B
anim_dvornik.kin	32.9 kB
detali2.jpg	697.2 kB
detali2.texture.txt	30 B
dvornik.im	20.9 kB
detali.jpg	703.2 kB
klub_tex-klub_tex.texture.txt	51 B
cab-03x.jpg	738.9 kB
klub_tex.texture.txt	31 B
klub_tex.jpg	315.3 kB
cifira.jpg	153.5 kB
kontroller.im	51.2 kB
kr_wr.im	580 B
kran_nm.im	8.6 kB
kran_nm1.im	3.3 kB
kran_tm.im	3.3 kB
krishka.im	12.8 kB
krishka_pult.im	9.4 kB
kw_ed.im	1.6 kB
kreslo.im	150.8 kB
needle_black.im	16.0 kB
needle_red.im	16.0 kB
ocl-ocl.texture.txt	41 B
ocl.jpg	241.0 kB
ocr-ocr.texture.txt	41 B
ocr.jpg	242.6 kB
okbm.texture.txt	47 B
okf1.texture.txt	49 B
okff.texture.txt	47 B
okna-a.jpg	117.1 kB
okna-f.jpg	784.2 kB
okna-okna-a.texture.txt	45 B
cab_03x.im	1.5 MB
okna-okna.texture.txt	47 B
okna-f1.jpg	700.4 kB
okna.texture.txt	27 B
otkidnoe_sidenie.im	10.0 kB
pedal.im	9.5 kB
per_plast.im	5.8 kB
okna.jpg	402.2 kB
pult.im	596.8 kB
pult.texture.txt	27 B
okna-m.jpg	797.7 kB
pult_obshivka.texture.txt	36 B
rb.im	22.7 kB
rev_back.im	516 B
rev_fwd.im	516 B
reversor.im	14.9 kB
ruchnik.im	42.4 kB
rukoyatka-395.im	32.9 kB
shtora.im	14.8 kB
shtora_vsp.im	8.0 kB
stop-kran.im	6.2 kB
tex9.texture.txt	27 B
thumbnail.jpg	22.5 kB
tumb_met.im	30.1 kB
tumbler.im	7.7 kB
tumbler2.im	2.6 kB
cifira.bmp	768.1 kB
vet-vet.texture.txt	41 B
vkl.im	2.0 kB
w_clear.im	3.5 kB
w_och_right.im	1.9 kB
w_wet.im	3.5 kB
tex9.jpg	756.0 kB
wel-wel.texture.txt	41 B
wer-wer.texture.txt	41 B
wind_l.im	30.1 kB
wind_r.im	30.1 kB
pult.jpg	755.7 kB
pult_obshivka.jpg	403.1 kB
wet.jpg	249.1 kB
warning.tga	256.0 kB
klub_tex.bmp	768.1 kB
klub_tex2.bmp	768.1 kB
Общий объём файлов:	15.0 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid2:833171:101298:1>	interior	Interior ED4M	3.7	20.04.2023 4:46:23	10.9 MB
Зависимости:
kuid	author	kind	name	build	date	size
Нет
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid:651621:100054>	a605	traincar	a_ED4M-0050 G_DCC	4.6	29.07.2022 11:11:52	11.6 MB
<kuid2:651621:100054:1>	a605	traincar	a_ED4M-0050 G_DCC	4.6	20.04.2023 12:23:38	11.6 MB
<kuid2:651621:100054:3>	a605	traincar	a_ED4M-0050 G_bot	4.6	14.04.2024 12:25:59	17.8 MB
<kuid:651621:100075>	a605	traincar	a_ED4M-0086 G_DCC	4.6	29.07.2022 11:19:54	9.8 MB
<kuid2:651621:100075:1>	a605	traincar	a_ED4M-0086 G_DCC	4.6	20.04.2023 12:23:39	9.8 MB
<kuid2:651621:100075:2>	a605	traincar	a_ED4M-0086 G_bot	4.6	13.04.2024 10:37:30	9.8 MB
<kuid2:651621:100080:1>	a605	traincar	a_ED4M-0349 G_DCC	4.6	20.04.2023 12:23:38	23.0 MB
<kuid:651621:100093>	a605	traincar	a_ED4M-0160 G_DCC	4.6	29.07.2022 11:22:12	11.3 MB
<kuid2:651621:100093:1>	a605	traincar	a_ED4M-0160 G_DCC	4.6	20.04.2023 12:23:38	11.3 MB
<kuid2:651621:100093:3>	a605	traincar	a_ED4M-0160 G_bot	4.6	14.04.2024 12:32:35	17.5 MB
<kuid2:833171:101303:5>	#833171	traincar	[bot] ED4M-0400 G	4.6	5.05.2023 19:35:46	9.8 MB
<kuid2:833171:101312:4>	#833171	traincar	[bot] ED4M-0038 G	4.6	5.05.2023 19:39:30	10.0 MB
<kuid2:833171:101313:5>	#833171	traincar	[bot] ED4M-0271 G	4.6	5.05.2023 19:38:00	9.8 MB
<kuid2:833171:101317:4>	#833171	traincar	[bot] ED4M-0086 G	4.6	5.05.2023 19:33:33	9.8 MB