<kuid:833171:101002> Interior ED9M

Тип: Кабина
Опубликовано: 5.05.2023 19:41:22
Скачиваний: 80
Размер: 8.8 MB
Скачать

Interior for ED9M
config.txt:
username                                "Interior ED9M"
category-class                          "ZI"
category-region                         "RU"
category-era                            "1990s;2000s;2010s"
cameradefault                           4
description                             "Interior for ED9M"
kind                                    "interior"
author                                  "3d модель и текстуры: Dimaas;фотоматериал: vl92m,Dimaas,ed4m;скрипты и настройка levik70"
trainz-build                            3.7
interior-controls-type                  "full"
cameralist
{
  camera0                               0.836,0.032,1.51,0.044,-0.142
  camera1                               0.504,-0.583,1.31,-12.573,-0.273
  camera2                               0.746,-0.489,1.197,0.525,-1.491
  camera3                               0.331,0.506,1.492,-12.507,-0.257
  camera4                               -0.722,0.273,1.823,0,0
  camera5                               -0.31,0.104,0.692,-12.593,-0.263
  camera6                               -1.024,0.044,1.6,3.153,-0.328
  camera7                               0.82,0.58,1.5,0,-0.09
}
mesh-table
{
  default
  {
    mesh                                "cab00-01x.im"
    auto-create                         1
  }
  suppress_brakes
  {
    mesh                                "suppress_brakes.im"
    att                                 "a.bil_suppress_brakes"
    auto-create                         1
  }
  ent
  {
    mesh                                "ent.im"
    att                                 "a.sav_inf5"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  stright
  {
    mesh                                "str.im"
    att                                 "a.sav_inf5"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  stleft
  {
    mesh                                "stl.im"
    att                                 "a.sav_inf5"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  gr_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_red.im"
    att                                 "a.needle-red"
    angles                              0,4.71231
    limits                              0,16
    att-parent                          "default"
  }
  tm_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_black.im"
    att                                 "a.needle"
    angles                              0,5.61231
    limits                              0,1600
    att-parent                          "default"
  }
  tc_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_black.im"
    att                                 "a.needle01"
    angles                              0,4.71231
    limits                              0,1600
    att-parent                          "default"
  }
  ur_equaliser
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_red.im"
    att                                 "a.needle-red01"
    angles                              0,5.61231
    limits                              0,1600
    att-parent                          "default"
  }
  kv_set
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "kw.im"
    att                                 "a.kw"
    limits                              0,4100
    angles                              0,4
    att-parent                          "default"
  }
  voltmeter_als
  {
    mesh                                "strelka_voltmeter.im"
    auto-create                         0
    kind                                "needle"
    att                                 "a.kw"
    limits                              0,150
    angles                              0,1.57
    att-parent                          "default"
  }
  omivatel
  {
    mesh                                "knopka1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka_omivatel"
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    angles                              0,-0.003
    mousespeed                          10
  }
  prg_inf
  {
    mesh                                "tumb_met.im"
    kind                                "lever"
    att                                 "a.per_zapas03"
    auto-create                         1
    limits                              0,1
    angles                              -0.025,0.5
    mousespeed                          150
    radius                              0.1
    notches                             0,1
    notchheight                         0,0
  }
  prg_inf2
  {
    kind                                "lever"
    att                                 "a.per_zapas01"
    mesh                                "tumb_met.im"
    auto-create                         1
    limits                              0,1
    angles                              -0.025,0.5
    mousespeed                          150
    radius                              0.1
    notches                             0,1
    notchheight                         0,0
  }
  left_door_otkr
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_door-left"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  right_door_otkr
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_door-right"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  pusk_sio
  {
    mesh                                "knopka1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka_pusk_sio"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  dveri_mash_lev
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_ldoor_mash"
    angles                              0.8,-0.3
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  dveri_mash_prav
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_rdoor_mash"
    angles                              0.8,-0.3
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  dveri_pom_lev
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_ldoor_kond"
    angles                              0.8,-0.3
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  dveri_pom_prav
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_rdoor_kond"
    angles                              0.8,-0.3
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  torm_comb
  {
    kind                                "pulllever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_torm"
    angles                              0.8,-0.3
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    test-collisions                     1
  }
  pesok
  {
    mesh                                "knopka1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka_sio"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  saut
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_saut"
    angles                              -0.5,0.25
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  osv_cab_low
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_svet_cab_tusk"
    angles                              -0.5,0.25
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  osvpult
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_svet_pulta"
    angles                              -0.5,0.25
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  vozvrat
  {
    kind                                "pulllever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_vz"
    angles                              0.8,-0.3
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  pant_up
  {
    kind                                "pulllever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.pantograph"
    angles                              0.8,-0.3
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    test-collisions                     1
  }
  pant_down
  {
    kind                                "pulllever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_pant-off"
    angles                              0.8,-0.3
    limits                              0,1
    notches                             0,1
    radius                              0.1
    notchheight                         1,1
  }
  avar_ept
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_ept"
    angles                              0.8,-0.3
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    test-collisions                     1
  }
  otpusk
  {
    kind                                "pulllever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_otpusk"
    angles                              -0.3,0.8
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -1
  }
  kt
  {
    mesh                                "knopka2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka_kt"
    limits                              0,1
    angles                              0.003,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
  }
  km1
  {
    mesh                                "kontroller.im"
    auto-create                         1
    kind                                "lever"
    att                                 "a.thottle_lever"
    limits                              -5,2
    angles                              -1.1,0.45
    notches                             0,0.14,0.28,0.42,0.56,0.71,0.85,1
    notchheight                         1,1,1,1,1,1,1,1
    radius                              0.14
    att-parent                          "default"
    mousespeed                          0.05
  }
  reverser1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "reversor.im"
    att                                 "a.reverser_lever"
    limits                              0,1
    angles                              -0.35,0.35
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          -1
    att-parent                          "default"
    radius                              0.1
  }
  rb_1
  {
    mesh                                "knopka2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka_rb03"
    limits                              0,1
    angles                              0,-0.003
    mousespeed                          10
    notches                             0,1
    notchheight                         0,0
  }
  perekl_proj
  {
    kind                                "lever"
    mesh                                "krutilka1.im"
    att                                 "a.light_lever"
    auto-create                         1
    angles                              0,1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.05
    mousespeed                          -2
  }
  bru
  {
    mesh                                "krutilka2.im"
    att                                 "a.ustavka_lever"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              1.1,4.228
    notches                             0,0.16,0.32,0.48,0.64,0.8,1
    notchheight                         2,2,2,2,2,2,2
    radius                              0.02
    mousespeed                          1
  }
  tiff
  {
    mesh                                "knopka2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.horn01"
    limits                              0,1
    angles                              0,-0.003
    mousespeed                          10
    notches                             0,1
    notchheight                         0,0
  }
  sw
  {
    mesh                                "knopka2.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_svistok01"
    limits                              0,1
    angles                              0,-0.003
    mousespeed                          15
    notches                             0,1
    notchheight                         0,0
  }
  kran395
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "rukoyatka-395.im"
    att                                 "a.train_brake_lever"
    limits                              0,100
    angles                              1.8,-0.1
    notches                             0,0.27,0.42,0.49,0.56,0.71,1
    notchheight                         1,1,1,1,1,1,1
    radius                              0
    mousespeed                          -0.15
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "ruchnik.im"
    att                                 "a.ind_brake_lever"
    angles                              0,-3.2
    limits                              0,32
    att-parent                          "default"
    notches                             0,0.41,0.53,0.78,1
    notchheight                         1,2,2,2,1
    radius                              0.15
    test-collisions                     1
    mousespeed                          -1
  }
  pedal_p
  {
    mesh                                "knopka2.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.horn02"
    limits                              0,1
    angles                              0,-0.003
    mousespeed                          15
    notches                             0,1
    notchheight                         0,0
  }
  pedal
  {
    mesh                                "knopka2.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_svistok02"
    limits                              0,1
    angles                              0,-0.003
    mousespeed                          15
    notches                             0,1
    notchheight                         0,0
  }
  rb2
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.rb02"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          1
    notches                             0,1
    notchheight                         0,0
  }
  ept_on_off
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_ept"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  sign_verh
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_red_verh"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  sign_niz
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_red_niz"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  buf_right
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_right"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  buf_left
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_left"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  osv_cab_norm
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_svet_cab"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  rezerv02
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_zapas02"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  perekl_stobogr
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_zerkalo"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  vent
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_otopl_cab"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  ventilacia
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_vent_cab"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  radio
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_radio"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  va
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_va"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -1
  }
  zapros
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopka1.im"
    att                                 "a.knopka_zapros"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
  }
  povtor
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopka1.im"
    att                                 "a.knopka_povtor"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
  }
  stekloobogrev
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_lobovogo"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  switch_39
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_ukazatel"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  stekloobogrev_bok
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_bokovogo"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  osv1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_svet_salona"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  obogrev_cab_norm
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_pogrev_cab_norm"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  obogrev_cab_itensiv
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_pogrev_cab_intens"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  compressor_vspom
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_dop_kompressor"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  tormozenie
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_tormojene"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
  }
  wipers_m
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_dvornik_m"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  wipers_p
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_dvornik_pom"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  zvonok
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopka1.im"
    att                                 "a.knopka_zvonok"
    limits                              0,1
    angles                              0,-0.003
    mousespeed                          10
    notches                             0,1
    notchheight                         0,0
  }
  dop_obogrev
  {
    kind                                "lever"
    mesh                                "krutilka4.im"
    att                                 "a.grev_cab_dop"
    auto-create                         1
    limits                              0,1
    angles                              -1,1
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0.1
    mousespeed                          5
  }
  maslootd
  {
    kind                                "lever"
    mesh                                "krutilka3.im"
    att                                 "a.grev_maslo"
    auto-create                         1
    limits                              0,1
    angles                              -0.75,1
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0.1
    mousespeed                          5
  }
  pitanie
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pitanie"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_alsn
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_alsn"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_svet
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_svet"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_maslootd
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_maslo"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_compressor_vspom
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_dop_kompress"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pant
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pant"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_doors
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_doors"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_lights
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_lights"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_bf_dvornik
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_bf_dvornik"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_stekloobogrev_lob
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_lobovoe"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  av_obogrev_marshrut
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_marshrut"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  av_stekloobogrev_bok
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_bokovoe"
    angles                              2,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  perekl_ppt
  {
    kind                                "lever"
    mesh                                "krutilka5.im"
    att                                 "a.ppt"
    auto-create                         1
    limits                              0,1
    angles                              0.7,-0.7
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.05
    mousespeed                          1
  }
  savpe_pusk
  {
    mesh                                "knopka_savpe.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka_savpe"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    mousespeed                          10
    notchheight                         0,0
  }
  savpe_on
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler_savpe.im"
    att                                 "a.per_savpe"
    angles                              0.5,-0.5
    limits                              0,1
    mousespeed                          1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  cep_on
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_vyhodn_cep"
    angles                              0.5,-0.5
    limits                              0,1
    mousespeed                          1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  rb1
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb01"
    limits                              0,1
    angles                              0,-0.006
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
  }
  epk_key
  {
    kind                                "lever"
    mesh                                "krutilka_epk.im"
    att                                 "a.epk_key"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    angles                              0,1.57
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
  }
  pedal_m
  {
    mesh                                "pedal.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pesok01"
    limits                              0,1
    angles                              0,-0.3
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              0.1
  }
  pedal_mp
  {
    mesh                                "pedal.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pesok02"
    limits                              0,1
    angles                              0,-0.3
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              0.1
  }
  vu
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_VU"
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  otkl
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_Q54"
    angles                              0.5,-1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  stopkran
  {
    kind                                "lever"
    mesh                                "stop-kran.im"
    att                                 "a.stop-kran"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    limits                              0,1
    angles                              1.57,0
    notches                             0,1
    notchheight                         0,0
  }
  swivel_chair
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kreslo.im"
    att                                 "a.kreslo"
    limits                              0,1
    angles                              6.8,-6.8
    radius                              0.1
    mousespeed                          0.2
    att-parent                          "default"
  }
  swivel_chair1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kreslo.im"
    att                                 "a.kreslo_pom"
    limits                              0,8
    angles                              6.8,-6.8
    radius                              0.2
    mousespeed                          0.2
    att-parent                          "default"
  }
  chair1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "otkidnoe_sidenie.im"
    att                                 "a.otkidnoe_sidenie"
    angles                              0,-1.6
    notches                             0,1
    limits                              0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -0.5
  }
  slidingwindowr
  {
    kind                                "animated-lever"
    mesh                                "wind_r.im"
    att                                 "a.okno01"
    use-parent-bounds                   1
    auto-create                         1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          0.5
    limits                              0,1
  }
  slidingwindowl
  {
    kind                                "animated-lever"
    mesh                                "wind_l.im"
    att                                 "a.okno02"
    use-parent-bounds                   1
    auto-create                         1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          0.5
    limits                              0,1
  }
  blind_r
  {
    kind                                "animated-lever"
    mesh                                "shtora.im"
    att                                 "a.shtora01"
    use-parent-bounds                   1
    auto-create                         1
    mousespeed                          -0.5
    limits                              0,1
    test-collisions                     1
  }
  blind_l
  {
    kind                                "animated-lever"
    mesh                                "shtora.im"
    att                                 "a.shtora02"
    use-parent-bounds                   1
    auto-create                         1
    mousespeed                          -0.5
    limits                              0,1
    test-collisions                     1
  }
  r_wiper
  {
    mesh                                "r_dvor.im"
    auto-create                         1
    att                                 "a.m_wip"
  }
  l_wiper
  {
    mesh                                "l_dvor.im"
    auto-create                         1
    att                                 "a.pom_wip"
  }
  och_w_l
  {
    mesh                                "w_och_lev.im"
    auto-create                         0
    att                                 "a.zip_wet0"
    att-parent                          "default"
  }
  och_w_r
  {
    mesh                                "w_och_right.im"
    auto-create                         0
    att                                 "a.zip_wet0"
    att-parent                          "default"
  }
  clear_w
  {
    mesh                                "w_clear.im"
    auto-create                         1
    att                                 "a.zapaska"
    att-parent                          "default"
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid:833171:101002>
kuid-table
{
}
Файлы:
attach_mesh.im	1.0 kB
detali-detali.texture.txt	47 B
detali.texture.txt	29 B
cifira-cifira.texture.txt	47 B
cab-00x.texture.txt	30 B
detali2.texture.txt	30 B
ent.im	728 B
down.im	956 B
k.im	1.0 kB
f.im	700 B
k20.im	1.0 kB
klub_tex-klub_tex.texture.txt	67 B
cab-00x.jpg	211.6 kB
klub_tex.texture.txt	65 B
knopka1.im	7.1 kB
kabina.jpg	216.5 kB
knopka_savpe.im	2.0 kB
knopka2.im	5.9 kB
kr_wr.im	580 B
kontroller.im	95.5 kB
krutilka1.im	5.9 kB
kreslo.im	98.1 kB
krutilka2.im	12.4 kB
krutilka3.im	13.3 kB
krutilka5.im	5.9 kB
krutilka4.im	13.3 kB
l.im	956 B
krutilka_epk.im	8.6 kB
kw.im	11.0 kB
minus.im	1.0 kB
l_dvor.im	10.9 kB
o.im	988 B
oc.im	700 B
needle_black.im	16.1 kB
ocl-ocl.texture.txt	41 B
needle_red.im	16.1 kB
detali2.jpg	649.0 kB
ocr-ocr.texture.txt	41 B
okna.texture.txt	43 B
otkidnoe_sidenie.im	10.0 kB
otpr.im	956 B
p.im	1.0 kB
ocl.jpg	252.3 kB
plus.im	1.0 kB
pedal.im	9.5 kB
podt.im	1.0 kB
detali.jpg	828.4 kB
pult.texture.txt	27 B
r_dvor.im	10.9 kB
rev_back.im	516 B
rb.im	22.7 kB
rev_fwd.im	516 B
reversor.im	3.4 kB
shtora.im	14.7 kB
stekla_bok.im	1.1 kB
rukoyatka-395.im	32.9 kB
ocr.jpg	259.5 kB
stl.im	728 B
str.im	728 B
suppress_brakes.im	1.1 kB
strelka_voltmeter.im	896 B
stop-kran.im	6.2 kB
tex10.texture.txt	30 B
ruchnik.im	42.4 kB
tex5.texture.txt	27 B
tex10.jpg	86.1 kB
cifira.tga	1.0 MB
tex6.texture.txt	27 B
klub_tex.tga	1.0 MB
tex9.texture.txt	27 B
tex5.jpg	237.0 kB
thumbnail.jpg	22.5 kB
tumbler.im	2.6 kB
tumb_met.im	30.1 kB
tumbler2.im	2.6 kB
up.im	892 B
vkl.im	2.0 kB
w_clear.im	1.8 kB
w_och_lev.im	1.9 kB
w_och_right.im	1.9 kB
tumbler_savpe.im	35.5 kB
warning.im	1.7 kB
wind_l.im	7.4 kB
wind_r.im	7.4 kB
tex9.jpg	241.3 kB
pult.jpg	745.4 kB
tex6.jpg	657.9 kB
cab00-01x.im	2.2 MB
okna.tga	4.0 MB
Общий объём файлов:	13.0 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid:833171:101002>	interior	Interior ED9M	3.7	5.05.2023 19:41:22	8.8 MB
Зависимости:
kuid	author	kind	name	build	date	size
Нет
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid2:833171:101001:1>	#833171	traincar	[bot] ED9M-0194 G	4.6	5.05.2023 19:40:52	11.3 MB
<kuid2:833171:101008:1>	#833171	traincar	[bot] ED9M-0187 G	4.6	5.05.2023 19:42:35	11.6 MB
<kuid2:833171:101012:1>	#833171	traincar	[bot] ED9M-0058 G	4.6	5.05.2023 19:44:55	10.9 MB
<kuid2:833171:101017:1>	#833171	traincar	[bot] ED9M-0098 G	4.6	5.05.2023 19:44:02	11.5 MB