<kuid:563475:100001> ER2 CAB 3

Тип: Кабина
Опубликовано: 2.12.2020 22:33:07
Скачиваний: 251
Размер: 712.0 kB

Скачать

config.txt:

category-class                          "ZI"
category-region-0                       "RU"
category-era-0                          "2000s"
mesh-table
{
  default
  {
    mesh                                "er9_cyl_int.IM"
    auto-create                         1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser.im"
    auto-create                         1
    att                                 "a.reverser"
    limits                              0,2
    angles                              0,1.25
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.14
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "traction.im"
    auto-create                         1
    att                                 "a.traction"
    att-parent                          "default"
    limits                              0,8
    angles                              0.1,1.5
    notches                             0,0.15,0.3,0.45,0.6,0.7,0.8,0.9,1
    notchheight                         3,3,3,3,3,3,3,3,3
    radius                              0.14
    mousespeed                          -0.1
  }
  trainbrake_lever
  {
    kind                                "lever"
    mesh                                "train_brake_lever.im"
    auto-create                         1
    att                                 "a.train_brake_lever"
    limits                              0,2
    angles                              0.75,-0.75
    notches                             0,0.25,0.5,0.75,1
    notchheight                         3,3,3,3,3
    radius                              0.18
    mousespeed                          0.75
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "mesh pressure_needle_sml.IM"
    auto-create                         1
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
  }
  no3pipe_needle
  {
    kind                                "needle"
    mesh                                "mesh pressure_needle_sml.IM"
    auto-create                         1
    att                                 "a.ind_brake_pressure"
    limits                              0,1000
  }
  bplocomain_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "mesh pressure_needle_sml.IM"
    att                                 "a.res_pressure_needle"
    att-parent                          "default"
    limits                              0,1400
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "mesh_speedo_needle1.IM"
    auto-create                         1
    att                                 "a.speedo_needle1"
    limits                              0,48
  }
  pantograph_lever
  {
    kind                                "lever"
    mesh                                "swich2_red.IM"
    att                                 "a.pantograph_lever"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  pantograph_lever1
  {
    kind                                "lever"
    mesh                                "swich1_red.IM"
    att                                 "a.pantograph_lever1"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  switch0
  {
    kind                                "lever"
    mesh                                "swich2_red.IM"
    att                                 "a.switch0"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  switch1
  {
    kind                                "lever"
    mesh                                "swich1_red.IM"
    att                                 "a.switch1"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  switch2
  {
    kind                                "lever"
    mesh                                "swich2_black.IM"
    att                                 "a.switch2"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  switch3
  {
    kind                                "lever"
    mesh                                "swich1_black.IM"
    att                                 "a.switch3"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  switch4
  {
    kind                                "lever"
    mesh                                "swich2_black.IM"
    att                                 "a.switch4"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  switch7
  {
    kind                                "lever"
    mesh                                "swich2_black.IM"
    att                                 "a.switch7"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  switch8
  {
    kind                                "lever"
    mesh                                "swich2_red.IM"
    att                                 "a.switch8"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  switch11
  {
    kind                                "lever"
    mesh                                "swich2_black.IM"
    att                                 "a.switch11"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  switch12
  {
    kind                                "lever"
    mesh                                "swich1_black.IM"
    att                                 "a.switch12"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  door_left_lever
  {
    kind                                "lever"
    mesh                                "swich1_red.IM"
    att                                 "a.door_left"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  door_right_lever
  {
    kind                                "lever"
    mesh                                "swich1_red.IM"
    att                                 "a.door_right"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.switch10"
    auto-create                         1
    mesh                                "swich1_red.IM"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
  }
}
camera                                  -0.814,0.31,1.5
cameralist
{
  camera0                               -0.798,0.381,0.963,0.202,-0.074
  camera1                               -0.948,0.814,0.759,0.202,-0.074
  camera2                               -0.798,0.775,0.826,0.078,-0.11
  camera3                               -1.304,0.555,0.99,0.202,-0.074
  camera4                               -0.595,0.974,0.829,-0.021,-0.045
  camera5                               -0.39,0.735,0.925,0.202,-0.074
  camera6                               0.362,0.656,0.802,0.202,-0.074
  camera7                               0.348,0.471,0.946,0.202,-0.074
  camera8                               -0.74,1.008,0.897,0.018,0
  camera9                               0.814,0.31,1.5,0,0
}
class                                   "ER2 CAB 3"
cameradefault                           0
asset-filename                          "ER2 CAB 3"
kind                                    "interior"
username                                "ER2 CAB 3"
kuid                                    <kuid:563475:100001>
kuid-table
{
}

Файлы:

cab1.texture.txt	27 B
cab2.texture.txt	27 B
cab4.texture.txt	27 B
cab3.texture.txt	27 B
cab5.jpg	30.9 kB
cab5.texture.txt	27 B
cab3.jpg	68.1 kB
cab4.jpg	81.2 kB
sound
sound / cabin.txt	641 B
sound / switch.wav	4.0 kB
sound / switch1.wav	3.4 kB
sound / throttle.wav	6.0 kB
sound / brake1.wav	40.6 kB
mesh pressure_needle_sml.im	3.9 kB
reverser.im	5.6 kB
swich1_black.im	1.9 kB
mesh_speedo_needle1.im	7.8 kB
swich1_red.im	1.9 kB
swich2_black.im	1.9 kB
swich2_red.im	1.9 kB
traction.im	6.9 kB
train_brake_lever.im	10.2 kB
cab2.jpg	145.2 kB
cab1.jpg	210.5 kB
er9_cyl_int.im	344.9 kB
Общий объём файлов:	977.7 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:563475:100001>	interior	ER2 CAB 3	0	2.12.2020 22:33:07	712.0 kB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:509054:11004>	#509054	traincar	RZD ER1-004 01	2.9	28.11.2020 19:55:47	8.6 MB
<kuid:509054:12413>	#509054	traincar	RZD ER2-413 01	2.9	2.12.2020 22:31:29	2.8 MB
<kuid:838131:100016>	#838131	traincar	UZ ER2-572 01	2.9	20.10.2021 1:36:09	3.3 MB
<kuid:838131:100185>	#838131	traincar	UZ ER2-308 01	2.9	18.10.2021 18:04:51	3.8 MB