<kuid2:542976:100366:1> Interior for Conrail GP35 b

Тип: Кабина
Опубликовано: 4.11.2021 11:41:28
Скачиваний: 35
Размер: 37.9 MB

Скачать

Interior for Conrail GP35 b.

config.txt:

username                                "Interior for Conrail GP35 b"
kind                                    "interior"
cameradefault                           0
description                             "Interior for Conrail GP35 b."
trainz-build                            3.5
author                                  "davesnow"
organisation                            "-"
contact-email                           "-"
contact-website                         "-"
category-region                         "AT"
category-era                            "1950s"
license                                 "This item is supplied free of charge for personal use by registered users of Trainz. It or its contents must not be modified, offered for sale or supplied as any part of a Payware package or provided for downloading on any site other than Auran unless this is expressly permitted in writing by the author davesnow / David E. Snow.


DISCLAIMER: It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item."
category-class                          "ZI"
cameralist
{
  camera0                               -1.189,-4.211,3.75,-0,-0
  camera1                               -1.189,-4.211,3.75,-0.93,-0.151
  camera2                               -1.189,-4.211,3.75,-2.843,-0
  camera3                               1.252,-4.169,3.75,-3.122,-0
  camera4                               1.065,-4.173,3.75,-5.242,-0.17
  camera5                               1.179,-4.152,3.699,-6.105,-0
  camera6                               0.464,-5.147,3.699,-6.141,-0
  camera7                               0.203,-3.689,3.791,-6.281,-0
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "conrail gp35 cab.jpg"
    width                               1024
    height                              768
  }
}
mesh-table
{
  default
  {
    mesh                                "Interior_dial_needles.im"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle_lever.im"
    att                                 "a.throttle_lever"
    limits                              0,8
    angles                              -0.61,0.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    mousespeed                          -1
    auto-create                         1
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "trainbrake_handle.im"
    att                                 "a.trainbrake_handle"
    limits                              0,4
    angles                              1.04,-0.69
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,2,2,2
    mousespeed                          -1
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    mesh                                "dynamic_handle.im"
    att                                 "a.dynamic"
    limits                              0,2
    angles                              0.73,-0.78
    notches                             0,0.5,1
    notchheight                         0.1,1
    mousespeed                          -1
    radius                              0.35
    auto-create                         1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser_handle.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.69,-0.69
    notches                             0,0.5,1
    notchheight                         1,1,1
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "speedometer_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,40
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "ind_brake_lever.im"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              0.69,-0.87
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.15
    mousespeed                          -1
    att-parent                          "default"
  }
  horn
  {
    kind                                "pulllever"
    mesh                                "horn.im"
    att                                 "a.horn"
    auto-create                         1
    angles                              -0,0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.switch0"
    mesh                                "switch.im"
    limits                              0,1
    angles                              0,2
    notches                             1,0
    notchheight                         0.1,0.1
    auto-create                         1
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "Amp_Needle.im"
    att                                 "a.ammeter"
    limits                              0,1500
    angles                              0,1.9
    auto-create                         1
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "white_needle.im"
    att                                 "a.equaliser_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "red_needle.im"
    att                                 "a.main_res_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "red_needle.im"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "white_needle.im"
    att                                 "a.brake_pipe_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  window_right_front
  {
    kind                                "lever"
    mesh                                "Window_Right_Front.im"
    att                                 "a.windowRtFt0"
    limits                              0,32
    angles                              0.0104,-0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_front
  {
    kind                                "lever"
    mesh                                "Window_Left_Front.im"
    att                                 "a.windowLfFt0"
    limits                              0,32
    angles                              -0.0104,0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_right_rear
  {
    kind                                "lever"
    mesh                                "Window_Right_Rear.im"
    att                                 "a.windowRtRr0"
    limits                              0,32
    angles                              0.013,0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_rear
  {
    kind                                "lever"
    mesh                                "Window_Left_Rear.im"
    att                                 "a.windowLfRr0"
    limits                              0,32
    angles                              0,0.013
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
}
kuid                                    <kuid2:542976:100366:1>
kuid-table
{
}

Файлы:

accessories art.texture.txt	38 B
brake cylinder textures.texture.txt	46 B
alpha objects-alpha objects.texture.txt	61 B
amp_needle.im	1.3 kB
coupler new art.texture.txt	38 B
$screenshot$.jpg	40.4 kB
cow catcher.texture.txt	34 B
conrail gp35 cab.jpg	144.5 kB
decals-decals.texture.txt	47 B
dynamic_handle.im	7.6 kB
ind_brake_lever.im	12.2 kB
horn.im	15.5 kB
interior art 1.texture.txt	37 B
alpha objects.tga	256.0 kB
indies shell artwork.texture.txt	43 B
interior art 2.texture.txt	37 B
decals.tga	1.0 MB
interior art 3.texture.txt	37 B
brake cylinder textures.tga	4.0 MB
interior art 4.texture.txt	37 B
interior control dials.texture.txt	45 B
accessories art.tga	3.0 MB
interior control right.texture.txt	45 B
coupler new art.tga	3.0 MB
cow catcher.tga	4.0 MB
interior control stand.texture.txt	45 B
interior walls.texture.txt	37 B
interior_dial_needles.im	857.5 kB
loco art.texture.txt	31 B
radio & seats art.texture.txt	40 B
red_needle.im	1.3 kB
reflection art.texture.txt	37 B
reflection art.tga	768.0 kB
reverser_handle.im	7.6 kB
sound
sound / air_horn_3.wav	177.1 kB
sound / cabin.txt	574 B
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / lever_5.wav	18.3 kB
sound / light_switch.wav	30.4 kB
sound / notch_1.wav	2.8 kB
sound / reverser.wav	10.4 kB
sound / switch_6.wav	11.6 kB
sound / throttle.wav	4.0 kB
sound / window.wav	74.0 kB
speedometer_needle.im	3.4 kB
switch.im	6.4 kB
throttle_lever.im	8.5 kB
trainbrake_handle.im	13.0 kB
white_needle.im	4.6 kB
window_left_front.im	5.1 kB
window_left_rear.im	12.8 kB
window_right_front.im	12.8 kB
window_right_rear.im	5.1 kB
indies shell artwork.tga	12.0 MB
interior art 1.tga	12.0 MB
radio & seats art.tga	4.0 MB
interior art 2.tga	12.0 MB
interior control dials.tga	16.0 MB
loco art.tga	16.0 MB
interior art 4.tga	16.0 MB
interior walls.tga	12.0 MB
interior control stand.tga	16.0 MB
interior control right.tga	12.0 MB
interior art 3.tga	16.0 MB
Общий объём файлов:	161.5 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:542976:100366:1>	interior	Interior for Conrail GP35 b	3.5	4.11.2021 11:41:28	37.9 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет