<kuid2:517519:560001:1> CD 560 interior

Тип: Кабина
Опубликовано: 2.08.2020 10:03:58
Скачиваний: 58
Размер: 2.2 MB

Скачать

config.txt:

kind                                    "interior"
category-class                          "ZI"
category-region                         "CZ"
category-era                            "1980s;1990s;2000s"
trainz-build                            3.7
author                                  "Milan Marek"
interior-controls-type                  "full"
cameralist
{
  camera0                               -0.636,0.021,0.585,0.1,-0.1
  camera1                               0.959,0.589,0.799,-0.85,-0.2
  camera2                               -1.23,0.655,0.799,0.85,-0.2
}
cameradefault                           0
mesh-table
{
  default
  {
    mesh                                "560_interior.im"
    auto-create                         1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "lev_460_rev.im"
    att                                 "a.reverser"
    limits                              0,2
    angles                              -1,1
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "lev_460_thr.im"
    att                                 "a.throttle"
    limits                              0,20
    angles                              0.2,-0.5
    notches                             0,0.047,0.095,0.142,0.19,0.238,0.285,0.33,0.38,0.428,0.476,0.523,0.571,0.619,0.66,0.71,0.761,0.81,0.857,0.9,0.952,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2
    radius                              0.15
    att-parent                          "default"
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    mesh                                "810_lev_valve.im"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              -1.4,-0.2
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,1
    radius                              0.15
    mousespeed                          -1
    att-parent                          "default"
    auto-create                         1
  }
  trainbrake_lever
  {
    kind                                "lever"
    mesh                                "lev_460_brz.im"
    att                                 "a.train_brake_lever"
    limits                              0,4
    angles                              1,-1.4
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              0.25
    att-parent                          "default"
    auto-create                         1
    mousespeed                          -0.5
  }
  heating-left
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr01"
    limits                              0,2
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  heating-cabin
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr02"
    limits                              0,2
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  ventilator-cabin
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr03"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  door_l
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr04"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  wiper
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr05"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  light
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr06"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  flashing_light-right
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr07"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  flashing_light-left
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr08"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  reduced_power
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr09"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  drive_regime
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr10"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  auxiliary_compressor
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr11"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  resistor_cooling
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr12"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  head_compressor
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr13"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  battery
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr15"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  motor-generator_connection
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr16"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  heating-right
  {
    kind                                "lever"
    mesh                                "810_lev_rev2.im"
    att                                 "a.switchr17"
    limits                              0,1
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  horn
  {
    kind                                "pullrope"
    mesh                                "810_button.im"
    att                                 "a.horn"
    limits                              0,1
    angles                              0.008,0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
    auto-create                         1
  }
  sanding
  {
    kind                                "pullrope"
    mesh                                "810_button.im"
    att                                 "a.button01"
    limits                              0,1
    angles                              0.008,0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
    auto-create                         1
  }
  drive_in_depo
  {
    kind                                "pullrope"
    mesh                                "810_button.im"
    att                                 "a.button03"
    limits                              0,1
    angles                              0.008,0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
    auto-create                         1
  }
  catchment_drain
  {
    kind                                "pullrope"
    mesh                                "810_button.im"
    att                                 "a.button04"
    limits                              0,1
    angles                              0.008,0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
    auto-create                         1
  }
  motor-generator_start
  {
    kind                                "pullrope"
    mesh                                "810_button3.im"
    att                                 "a.button05"
    limits                              0,1
    angles                              0.008,0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    att-parent                          "default"
    auto-create                         1
  }
  light_switch
  {
    kind                                "lever"
    mesh                                "810_lev_rev.im"
    att                                 "a.switch01"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  pantograph_lever
  {
    kind                                "lever"
    mesh                                "460_lev.im"
    att                                 "a.switch02"
    limits                              0,1
    angles                              -0.8,0.8
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  pantograph-car_choice
  {
    kind                                "lever"
    mesh                                "810_lev_rev3.im"
    att                                 "a.switch03"
    limits                              0,2
    angles                              -2,0.4
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  adjustment_of_current
  {
    kind                                "lever"
    mesh                                "810_lev_rev3.im"
    att                                 "a.switch04"
    limits                              0,4
    angles                              -2.4,0.8
    notches                             0,0.25,0.5,0.75,1
    notchheight                         3,3,3,3
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  door_control
  {
    kind                                "lever"
    mesh                                "810_lev_rev3.im"
    att                                 "a.switch05"
    limits                              0,1
    angles                              -1.6,0
    notches                             0,1
    notchheight                         3,3
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  automatic_drive
  {
    kind                                "lever"
    mesh                                "810_lev_rev3.im"
    att                                 "a.switch06"
    limits                              0,2
    angles                              -1.6,0
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.1
    att-parent                          "default"
    auto-create                         1
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "ned_red.im"
    att                                 "a.res_pressure_needle"
    limits                              0,1600
    att-parent                          "default"
    auto-create                         1
    angles                              0,4.9
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "ned_white.im"
    att                                 "a.res_pressure_needle"
    limits                              0,1600
    att-parent                          "default"
    auto-create                         1
    angles                              -3.14,1.8
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "ned_white2.im"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1200
    att-parent                          "default"
    auto-create                         1
    angles                              0,4.7
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "ned_460_white_sp.im"
    att                                 "a.speedo_needle2"
    limits                              0,41.599998
    att-parent                          "default"
    auto-create                         1
    angles                              0,4.3
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "ned_460_amper.im"
    att                                 "a.ampmeter_motor1"
    limits                              0,1000
    angles                              0,0.75
    att-parent                          "default"
    auto-create                         1
  }
  ampmeter2_needle
  {
    kind                                "needle"
    mesh                                "ned_460_amper.im"
    att                                 "a.ampmeter_motor02"
    limits                              0,1000
    angles                              0,0.75
    att-parent                          "default"
    auto-create                         1
  }
  rol
  {
    kind                                "pullrope"
    mesh                                "460_rol.im"
    att                                 "a.rol01"
    limits                              0,1
    angles                              0.5,0
    notches                             0,1
    mousespeed                          -1
    att-parent                          "default"
    auto-create                         1
  }
  rol2
  {
    kind                                "pullrope"
    mesh                                "460_rol.im"
    att                                 "a.rol02"
    limits                              0,1
    angles                              0.5,0
    notches                             0,1
    mousespeed                          -1
    att-parent                          "default"
    auto-create                         1
  }
  rol3
  {
    kind                                "pullrope"
    mesh                                "460_rol2.im"
    att                                 "a.rol03"
    limits                              0,1
    angles                              0.5,0
    notches                             0,1
    mousespeed                          -1
    att-parent                          "default"
    auto-create                         1
  }
  rol4
  {
    kind                                "pullrope"
    mesh                                "460_rol2.im"
    att                                 "a.rol04"
    limits                              0,1
    angles                              0.5,0
    notches                             0,1
    mousespeed                          -1
    att-parent                          "default"
    auto-create                         1
  }
  windows
  {
    mesh                                "460_wind.im"
    att-parent                          "default"
    auto-create                         1
  }
}
username                                "CD 560 interior"
kuid                                    <kuid2:517519:560001:1>
thumbnails
{
  0
  {
    image                               "cover.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
}

Файлы:

363_cab_switch black.texture.txt	43 B
363_cab_switch red.texture.txt	41 B
460_cab01.texture.txt	32 B
460_cab02.texture.txt	32 B
460_cab03.texture.txt	32 B
363_cab_switch black.tga	6.0 kB
363_cab_switch red.tga	6.0 kB
460_cab04.texture.txt	32 B
sound
sound / cabin.txt	1.0 kB
sound / notch_1.wav	2.8 kB
sound / reverser.wav	10.4 kB
sound / switch_6.wav	11.6 kB
sound / throttle.wav	4.0 kB
460_cab05.texture.txt	32 B
460_cab04.tga	12.0 kB
460_cab06.texture.txt	32 B
460_cab05.tga	48.0 kB
460_cab07.texture.txt	32 B
460_cab_brzd.texture.txt	35 B
460_cab06.tga	48.0 kB
460_cab_brzd.tga	48.0 kB
460_cab_brzd2.texture.txt	36 B
460_cab_switch.texture.txt	37 B
460_cab_windows.texture.txt	38 B
460_cab03.tga	384.0 kB
460_cabin_bra.texture.txt	36 B
460_cab_switch.tga	48.0 kB
460_int01.texture.txt	32 B
460_cabin_bra.tga	96.0 kB
460_lev.im	4.0 kB
460_rol.im	1.4 kB
460_rol2.im	1.4 kB
460_cab_brzd2.tga	48.0 kB
460_wind.im	4.8 kB
560_cabtl.texture.txt	32 B
560_cabtl.tga	12.0 kB
810_button.im	2.5 kB
810_button3.im	2.5 kB
810_cab_lever1.texture.txt	37 B
810_cab_lever1.tga	12.0 kB
810_cab_silv.texture.txt	35 B
810_cab_silv.tga	12.0 kB
810_cab_switch black.texture.txt	43 B
810_cab_switch black.tga	6.0 kB
810_cab_switch green.texture.txt	43 B
810_cab_switch green.tga	6.0 kB
810_cab_switch.texture.txt	37 B
810_lev_rev.im	4.0 kB
810_lev_rev2.im	3.7 kB
810_lev_rev3.im	4.0 kB
810_lev_valve.im	7.0 kB
810_cab_switch.tga	48.0 kB
cover.jpg	12.9 kB
env_metal.texture.txt	32 B
lev_460_brz.im	10.3 kB
lev_460_rev.im	3.4 kB
lev_460_thr.im	5.4 kB
ned_460_amper.im	648 B
ned_460_white_sp.im	1.8 kB
ned_red.im	1.5 kB
ned_white.im	1.5 kB
ned_white2.im	1.5 kB
sklo.texture.txt	27 B
sklo.tga	236 B
white.texture.txt	28 B
white.tga	236 B
460_cab_windows.tga	192.0 kB
560_interior.im	410.6 kB
env_metal.bmp	192.1 kB
460_cab07.tga	768.0 kB
460_cab02.tga	768.0 kB
460_int01.tga	768.0 kB
460_cab01.tga	768.0 kB
Общий объём файлов:	4.7 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:517519:560001:1>	interior	CD 560 interior	3.7	2.08.2020 10:03:58	2.2 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:517519:5600051:1>	#517519	traincar	CD 560 005-1	3.8	18.10.2021 18:00:52	3.7 MB
<kuid2:517519:5600061:1>	#517519	traincar	CD 560 006-9	3.8	12.01.2021 22:35:24	3.7 MB
<kuid:622685:102112>	#622685	traincar	ZSSK 560 011-9	3.8	2.08.2020 9:45:35	3.3 MB