<kuid2:439337:101495:2> Interior for GP40 CCLE No Dynamic SAP

Тип: Кабина
Опубликовано: 23.07.2020 19:53:03
Скачиваний: 71
Размер: 37.0 MB

Скачать

Interior for EMD GP40 WITHOUT Dynamic Brakes. Re-Skin of Interior for EMD GP38-2 WITHOUT Dynamic Brakes DES by davesnow. The original author retains all copyrights to both textures and meshes used in this item. My thanks to the original author for his great item! It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item.

config.txt:

username                                "Interior for GP40 CCLE No Dynamic SAP"
kind                                    "interior"
cameradefault                           0
description                             "Interior for EMD GP40 WITHOUT Dynamic Brakes. Re-Skin of Interior for EMD GP38-2 WITHOUT Dynamic Brakes DES by davesnow. The original author retains all copyrights to both textures and meshes used in this item. My thanks to the original author for his great item! It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item."
trainz-build                            3.7
author                                  "MSGSapper"
contact-email                           "bob@rdalton.biz"
category-region                         "CA;US"
category-era                            "1950s;1960s;1970s;1980s;1990s;2000s;2010s"
license                                 "This item is supplied free of charge for personal use by registered users of Trainz. It or its contents must not be modified, offered for sale or supplied as any part of a Payware package or provided for downloading on any site other than Auran unless this is expressly permitted in writing by the author davesnow / David E. Snow."
category-class                          "ZI"
cameralist
{
  camera0                               -1.149,-4.175,0.1,-0,-0
  camera1                               -1.149,-4.175,0.1,-0.93,-0.151
  camera2                               -1.149,-4.175,0.1,-2.843,-0
  camera3                               1.252,-4.169,0.1,-3.122,-0
  camera4                               1.065,-4.173,0.1,-5.242,-0.17
  camera5                               1.179,-4.152,0.1,-6.105,-0
  camera6                               0.464,-5.147,0.25,-6.141,-0
  camera7                               0.203,-3.689,0.15,-6.281,-0
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
mesh-table
{
  default
  {
    mesh                                "interior_no_dynamic.im"
    auto-create                         1
    position                            0,0,-3.4
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle_lever.im"
    att                                 "a.throttle_lever"
    limits                              0,8
    angles                              -0.61,0.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    mousespeed                          -1
    auto-create                         1
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "trainbrake_handle.im"
    att                                 "a.trainbrake_handle"
    limits                              0,4
    angles                              1.04,-0.69
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,2,2,2
    mousespeed                          -1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser_handle.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.69,-0.69
    notches                             0,0.5,1
    notchheight                         1,1,1
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "speedometer_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,48
    auto-create                         1
    angles                              0,4.25
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "ind_brake_lever.im"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              0.69,-0.87
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.15
    mousespeed                          -1
    att-parent                          "default"
  }
  horn
  {
    kind                                "pulllever"
    mesh                                "horn.im"
    att                                 "a.horn"
    auto-create                         1
    angles                              -0,0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.switch0"
    mesh                                "switch.im"
    limits                              0,1
    angles                              0,2
    notches                             1,0
    notchheight                         0.1,0.1
    auto-create                         1
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "Amp_Needle.im"
    att                                 "a.ammeter"
    limits                              0,1500
    angles                              0,1.9
    auto-create                         1
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "white_needle.im"
    att                                 "a.equaliser_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "red_needle.im"
    att                                 "a.main_res_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "red_needle.im"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "white_needle.im"
    att                                 "a.brake_pipe_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  window_right_front
  {
    kind                                "lever"
    mesh                                "Window_Right_Front.im"
    att                                 "a.windowRtFt0"
    limits                              0,32
    angles                              0.0104,-0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_front
  {
    kind                                "lever"
    mesh                                "Window_Left_Front.im"
    att                                 "a.windowLfFt0"
    limits                              0,32
    angles                              -0.0104,0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_right_rear
  {
    kind                                "lever"
    mesh                                "Window_Right_Rear.im"
    att                                 "a.windowRtRr0"
    limits                              0,32
    angles                              0.013,0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_rear
  {
    kind                                "lever"
    mesh                                "Window_Left_Rear.im"
    att                                 "a.windowLfRr0"
    limits                              0,32
    angles                              0,0.013
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
}
kuid                                    <kuid2:439337:101495:2>
kuid-table
{
}

Файлы:

accessories art.texture.txt	38 B
$screenshot$.jpg	40.4 kB
alpha objects-alpha objects.texture.txt	61 B
amp_needle.im	1.3 kB
alpha objects.tga	256.0 kB
brake cylinder textures.texture.txt	46 B
accessories art.tga	3.0 MB
coupler new art.texture.txt	38 B
brake cylinder textures.tga	4.0 MB
cow catcher.texture.txt	34 B
decals-decals.texture.txt	47 B
horn.im	15.5 kB
ind_brake_lever.im	12.2 kB
decals.tga	1.0 MB
indies shell artwork.texture.txt	43 B
coupler new art.tga	3.0 MB
interior art 1.texture.txt	37 B
cow catcher.tga	4.0 MB
interior art 2.texture.txt	37 B
interior art 3.texture.txt	37 B
interior art 4.texture.txt	37 B
interior control dials.texture.txt	45 B
indies shell artwork.tga	12.0 MB
interior art 2.tga	12.0 MB
interior art 1.tga	12.0 MB
interior control dials.tga	16.0 MB
interior art 4.tga	16.0 MB
interior control right.texture.txt	45 B
interior control stand.texture.txt	45 B
interior walls.texture.txt	37 B
interior_no_dynamic.im	839.6 kB
loco art.texture.txt	31 B
interior art 3.tga	16.0 MB
radio & seats art.texture.txt	40 B
red_needle.im	1.3 kB
reflection art.texture.txt	37 B
reflection art.tga	768.0 kB
reverser_handle.im	7.6 kB
sound
sound / air_horn_3.wav	177.1 kB
sound / cabin.txt	574 B
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / lever_5.wav	18.3 kB
sound / notch_1.wav	2.8 kB
sound / light_switch.wav	30.4 kB
sound / reverser.wav	10.4 kB
sound / switch_6.wav	11.6 kB
sound / throttle.wav	4.0 kB
sound / window.wav	74.0 kB
speedometer_needle.im	3.4 kB
switch.im	6.4 kB
throttle_lever.im	8.5 kB
trainbrake_handle.im	13.0 kB
white_needle.im	4.6 kB
window_left_front.im	5.1 kB
window_left_rear.im	12.8 kB
window_right_front.im	12.8 kB
window_right_rear.im	5.1 kB
radio & seats art.tga	4.0 MB
interior walls.tga	12.0 MB
loco art.tga	12.0 MB
interior control stand.tga	16.0 MB
interior control right.tga	12.0 MB
Общий объём файлов:	157.3 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:439337:101495:2>	interior	Interior for GP40 CCLE No Dynamic SAP	3.7	23.07.2020 19:53:03	37.0 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:439337:100165:4>	#439337	traincar	GP40 CCLE #021 SAP	3.7	23.07.2020 21:01:47	1.2 MB
<kuid2:439337:100166:4>	#439337	traincar	GP40 CCLE #022 SAP	3.7	23.07.2020 20:18:48	1.2 MB
<kuid2:439337:100169:4>	#439337	traincar	GP40 CCLE #023 SAP	3.7	23.07.2020 20:07:56	1.2 MB