<kuid2:439337:100518:1> SAP_Liftbridge_Control_House

Тип: Кабина
Опубликовано: 23.07.2020 20:23:42
Скачиваний: 35
Размер: 1.4 MB

Скачать

A control house for a lift bridge such as the SAP_Austin_Lift_Bridge_2. With the generous permission of Jon Hull (AKA austin316hockey), the original author, I have taken over this item in order to give it additional functionality as well as update it to current standards and allow it to continue in Trainz. The lever raises and lowers the lift bridge section while the other controls only make various sounds.

config.txt:

kuid                                    <kuid2:439337:100518:1>
username                                "SAP_Liftbridge_Control_House"
kind                                    "interior"
cameradefault                           0
cabin-visible-from-outside              0
script                                  "TransControllerCabin"
class                                   "TransControllerCabin"
author                                  "MSGSapper"
contact-email                           "bob@rdalton.biz"
category-region                         "CA;US"
category-era                            "1920s;1930s;1940s;1950s;1960s;1970s;1980s;1990s;2000s;2010s"
description                             "A control house for a lift bridge such as the SAP_Austin_Lift_Bridge_2. With the generous permission of Jon Hull (AKA austin316hockey), the original author, I have taken over this item in order to give it additional functionality as well as update it to current standards and allow it to continue in Trainz. The lever raises and lowers the lift bridge section while the other controls only make various sounds."
trainz-build                            3.3
category-keyword                        "bridge;lift;control;house;msgsapper"
category-class                          "ZX"
obsolete-table
{
}
cameralist
{
  camera0                               1.693,0.069,2.59,-1.575,-0.794
  camera1                               1.693,0.069,2.59,0,0
}
thumbnails
{
  0
  {
    width                               240
    height                              180
    image                               "preview.jpg"
  }
}
mesh-table
{
  spanlock_1_switch
  {
    kind                                "lever"
    att                                 "a.spanlock_1_switch"
    mesh                                "dial.im"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
    auto-create                         1
  }
  spanlock_2_switch
  {
    kind                                "lever"
    att                                 "a.spanlock_2_switch"
    mesh                                "dial.im"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
    auto-create                         1
  }
  spanlock_3_switch
  {
    kind                                "lever"
    att                                 "a.spanlock_3_switch"
    mesh                                "dial.im"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
    auto-create                         1
  }
  spanlock_4_switch
  {
    kind                                "lever"
    att                                 "a.spanlock_4_switch"
    mesh                                "dial.im"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
    auto-create                         1
  }
  start_stop_button
  {
    kind                                "switch"
    att                                 "a.start_stop_button"
    mesh                                "button.im"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         1,2
    att-parent                          "transcontroller"
    auto-create                         1
  }
  warning_light_button
  {
    kind                                "switch"
    att                                 "a.warning_light_button"
    mesh                                "button.im"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         1,2
    att-parent                          "transcontroller"
    auto-create                         1
  }
  platform_light_switch
  {
    kind                                "lever"
    att                                 "a.platform_light_switch"
    mesh                                "lever.im"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         1,2
    att-parent                          "transcontroller"
    auto-create                         1
  }
  base_light_switch
  {
    kind                                "lever"
    att                                 "a.base_light_switch"
    mesh                                "lever.im"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         1,2
    att-parent                          "transcontroller"
    auto-create                         1
  }
  reverser
  {
    kind                                "lever"
    mesh                                "reverser.im"
    att                                 "a.reverser"
    limits                              -1,1
    angles                              -0.525,0.525
    notches                             0,0.5,1
    notchheight                         1,2,1
    att-parent                          "transcontroller"
    auto-create                         1
  }
  default
  {
    mesh                                "liftbridge_control_house.im"
    auto-create                         1
  }
  transcontroller
  {
    mesh                                "trans_controller.im"
    att-parent                          "default"
    auto-create                         1
  }
}
soundscript
{
  lightlever1
  {
    trigger                             "lightlever1"
    nostartdelay                        1
    repeat-delay                        1,1
    distance                            50,170
    sound
    {
      0                                 "/sound/notch_1.wav"
    }
  }
  movelever1
  {
    trigger                             "movelever1"
    nostartdelay                        1
    repeat-delay                        1,1
    distance                            50,170
    sound
    {
      0                                 "/sound/lever_2.wav"
    }
  }
  pushbutton1
  {
    trigger                             "pushbutton1"
    nostartdelay                        1
    repeat-delay                        1,1
    distance                            50,170
    sound
    {
      0                                 "/sound/switch_6.wav"
    }
  }
  spanlock
  {
    trigger                             "spanlock"
    nostartdelay                        1
    repeat-delay                        1,1
    distance                            50,170
    sound
    {
      0                                 "/sound/button 1.wav"
    }
  }
  startup
  {
    trigger                             "startup"
    nostartdelay                        1
    repeat-delay                        1,0
    distance                            50,170
    sound
    {
      0                                 "/sound/warning_bell_1.wav"
    }
  }
  reverse
  {
    trigger                             "reverse"
    repeat-delay                        1,1
    distance                            50,170
    sound
    {
      0                                 "/sound/turntable.wav"
    }
  }
  cb
  {
    trigger                             "cb"
    repeat-delay                        20,50
    distance                            50,170
    sound
    {
      radio                             "/sound/garbled 1.wav"
    }
  }
}
kuid-table
{
}

Файлы:

brass.texture.txt	28 B
brass.tga	12.0 kB
brass_handles.texture.txt	36 B
brass_handles.tga	12.0 kB
button.im	2.2 kB
cb.texture.txt	25 B
cb.tga	24.0 kB
controller_top.texture.txt	37 B
controller_top.tga	128.0 kB
control_house.texture.txt	36 B
control_house.tga	384.5 kB
dial.im	2.8 kB
env_metal.texture.txt	32 B
env_metal.tga	12.0 kB
lever.im	2.3 kB
liftbridge_control_house.im	15.8 kB
lift_panel.texture.txt	33 B
lift_panel.tga	384.0 kB
preview.jpg	13.4 kB
red.texture.txt	26 B
red.tga	812 B
reverser.im	5.0 kB
sound
sound / button 1.wav	7.4 kB
sound / cabin.txt	239 B
sound / garbled 1.wav	286.1 kB
sound / lever_2.wav	21.8 kB
sound / notch_1.wav	2.8 kB
sound / switch_6.wav	11.6 kB
sound / turntable.wav	586.6 kB
sound / warning_bell_1.wav	144.3 kB
transcontrollercabin.gs	5.1 kB
trans_controller.im	6.6 kB
wood_n_spinner.texture.txt	37 B
wood_n_spinner.tga	96.0 kB
Общий объём файлов:	2.1 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:439337:100518:1>	interior	SAP_Liftbridge_Control_House	3.3	23.07.2020 20:23:42	1.4 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:439337:100515:2>	#439337	turntable	SAP_Austin_Lift_Bridge_2	3.3	20.04.2021 20:04:05	904.0 kB