<kuid:404079:2820> NRC RKEX T5b - 1995+

Тип: traincar
Опубликовано: 18.10.2021 20:39:21
Скачиваний: 19
Размер: 7.0 MB

Скачать

From March 1980 through to July 1980 ELX wagons numbered 9, 18, 26, 27, 28, 31, 34 and 49 had their doors removed and timber bolsters fitted to the floor and recoded VOEX for Steel Slab traffic between Albury, NSW and Long Island, Vic. These wagons never went on the Standard Gauge, while at Albury loads where moved from SG wagons to BG wagons rather than bogie exchange, about 1982/83 the side bodies where removed and stanchions fitted like the VODX wagons. From March 1984 VOBX wagons numbered 42, 53, 62 and 65 where converted to VOEX however this time the sides where lowered and numbered 9 to 12. In 1986 another 12 VOBX/VOCX wagons numbered 394, -, 266, 207, 197, 363, 233, 397, 1016, 398, 406 and 211 where converted to VOEX from February through to March and renumbered 39 to 50 following the VODX conversions. Going into 1987 all VOEX where recoded VKEX and fitted with extra stanchions. The extra stanchions may have been fitted in 1987 at North Melbourne Workshops when they where recoded or between 1989 to 1991 during their lift period and repaint at North Bendigo Workshops. From 1991/92 these where also seen at Mile End on South Australian steel traffic. These where recoded to RKEX in late 1994 handing over the rollingstock to the Federal Government operator National Rail Corporation and remained on the Broad Gauge until April 1995 then they all went on the Standard Gauge. In 1995 NRC moved their load exchange operation from Albury to Melbourne which made it easier for them to move loads from both SG and BG wagons and removed the need to send BG Steel trains to Albury just to swap loads from SG to BG stock along with some RKEX going on the Standard Gauge. In 1995 ROBX 114 and 170 where converted to RKEX keeping their original numbers.

This Model represents the Type 5 RKEX wagons with Minor handbrake and numbered 170 from early 1995 on Standard Gauge, Step's created by Zec.

Mass: 22.24 tonnes (empty) 74.00 tonnes (loaded)
Load Capacity: 56 tonnes
Max Speed: 96kph
Axle Load: 18.50 tonnes
Brake Cylinder: (1) 305mm x 305mm Air slack Adjuster
Brake Ratio: 34.9% (Loaded) ~ 63.4% (Empty) Load Compensating

config.txt:

kuid                                    <kuid:404079:2820>
kind                                    "traincar"
category-class                          "XG"
category-region                         "AU"
category-era                            "1990s"
engine                                  0
mass                                    22240.171875
trainz-build                            3.6
username                                "NRC RKEX T5b - 1995+"
enginespec                              <kuid2:404079:1081:2>
script                                  "wagon"
class                                   "wagon"
max-coupler-gap                         0.014
description                             "From March 1980 through to July 1980 ELX wagons numbered 9, 18, 26, 27, 28, 31, 34 and 49 had their doors removed and timber bolsters fitted to the floor and recoded VOEX for Steel Slab traffic between Albury, NSW and Long Island, Vic. These wagons never went on the Standard Gauge, while at Albury loads where moved from SG wagons to BG wagons rather than bogie exchange, about 1982/83 the side bodies where removed and stanchions fitted like the VODX wagons. From March 1984 VOBX wagons numbered 42, 53, 62 and 65 where converted to VOEX however this time the sides where lowered and numbered 9 to 12. In 1986 another 12 VOBX/VOCX wagons numbered 394, -, 266, 207, 197, 363, 233, 397, 1016, 398, 406 and 211 where converted to VOEX from February through to March and renumbered 39 to 50 following the VODX conversions. Going into 1987 all VOEX where recoded VKEX and fitted with extra stanchions. The extra stanchions may have been fitted in 1987 at North Melbourne Workshops when they where recoded or between 1989 to 1991 during their lift period and repaint at North Bendigo Workshops. From 1991/92 these where also seen at Mile End on South Australian steel traffic. These where recoded to RKEX in late 1994 handing over the rollingstock to the Federal Government operator National Rail Corporation and remained on the Broad Gauge until April 1995 then they all went on the Standard Gauge. In 1995 NRC moved their load exchange operation from Albury to Melbourne which made it easier for them to move loads from both SG and BG wagons and removed the need to send BG Steel trains to Albury just to swap loads from SG to BG stock along with some RKEX going on the Standard Gauge. In 1995 ROBX 114 and 170 where converted to RKEX keeping their original numbers.

This Model represents the Type 5 RKEX wagons with Minor handbrake and numbered 170 from early 1995 on Standard Gauge, Step's created by Zec.

Mass: 22.24 tonnes (empty) 74.00 tonnes (loaded)
Load Capacity: 56 tonnes
Max Speed: 96kph
Axle Load: 18.50 tonnes
Brake Cylinder: (1) 305mm x 305mm Air slack Adjuster
Brake Ratio: 34.9% (Loaded) ~ 63.4% (Empty) Load Compensating"
author                                  "Azervich"
contact-email                           "azervich@hotmail.com"
contact-website                         "http;//www.victrainz.com.au/forum"
license                                 "Victrainz Standard License."
mesh-table
{
  default
  {
    mesh                                "wagon_body/wagon.lm"
    auto-create                         1
  }
  handbrake
  {
    mesh                                "wagon_body/handbrake.lm"
    anim                                "wagon_body/handbrake.kin"
    auto-create                         1
  }
  grade_control_lever
  {
    mesh                                "wagon_body/grade-control-lever.lm"
    anim                                "wagon_body/grade-control-lever.kin"
    auto-create                         1
  }
  load_compensating_lever
  {
    mesh                                "wagon_body/load-compensating-lever.lm"
    anim                                "wagon_body/load-compensating-lever.kin"
    auto-create                         1
  }
  couple_front
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "vr-auto-coupler-black.lm"
    anim                                "vr-auto-coupler-black.kin"
    att                                 "a.coup-f"
    auto-create                         1
  }
  couple_back
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "vr-auto-coupler-black.lm"
    anim                                "vr-auto-coupler-black.kin"
    att                                 "a.coup-r"
    auto-create                         1
  }
  hose_front
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "animated-brake-hose.lm"
    anim                                "animated-brake-hose.kin"
    att                                 "a.coup-f"
    auto-create                         1
  }
  hose_straight_front
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "animated-brake-hose-straight.lm"
    anim                                "animated-brake-hose-straight.kin"
    att                                 "a.coup-f"
    auto-create                         0
  }
  hose_back
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "animated-brake-hose.lm"
    anim                                "animated-brake-hose.kin"
    att                                 "a.coup-r"
    auto-create                         1
  }
  hose_straight_back
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "animated-brake-hose-straight.lm"
    anim                                "animated-brake-hose-straight.kin"
    att                                 "a.coup-r"
    auto-create                         0
  }
  shadow
  {
    mesh                                "shadow/shadow.lm"
    auto-create                         0
  }
}
queues
{
  slab_loads
  {
    size                                2
    initial-count                       0
    product-kuid                        <kuid:404079:42>
    allowed-products
    {
      0                                 <kuid:404079:42>
    }
    attachment-points
    {
      0                                 "a.load01"
      1                                 "a.load02"
    }
  }
}
extensions
{
  max_permitted_speed-60850             "96kph"
  active-coupling-standard-60850
  {
    version-major                       "2"
    version-minor                       "0"
    brakes                              "airbrake"
    front
    {
      coupler                           "knuckle"
      gangway                           "none"
      airbraketype                      "single"
      airbrakeside                      "right"
      vacbrake                          "none"
      multiple-working                  "none"
      heating-type                      "none"
      rch                               "none"
    }
    back
    {
      coupler                           "knuckle"
      gangway                           "none"
      airbraketype                      "single"
      airbrakeside                      "right"
      vacbrake                          "none"
      multiple-working                  "none"
      heating-type                      "none"
      rch                               "none"
    }
  }
}
bogeys
{
  0
  {
    bogey                               <kuid:404079:3125>
    reversed                            0
    rotation-permitted                  1
    sideplay-permitted                  1
  }
  1
  {
    bogey                               <kuid:404079:3126>
    reversed                            0
    rotation-permitted                  1
    sideplay-permitted                  1
  }
}
thumbnails
{
  preview
  {
    image                               "screenshot.jpg"
    width                               240
    height                              180
  }
  icon
  {
    image                               "icon.tga"
    width                               64
    height                              32
  }
}
kuid-table
{
  acslib                                <kuid2:60850:89100:5>
  enginespec                            <kuid2:404079:1081:2>
  couple_mesh                           <kuid2:103475:60018:12>
  vr_slab_load                          <kuid:404079:42>
  wa_xcw_front                          <kuid:404079:3125>
  wa_xcw_back                           <kuid:404079:3126>
}

Файлы:

shadow
shadow / shadow-low.im	9.7 kB
shadow / shadow.lm.txt	161 B
shadow / shadow.im	70.2 kB
computerisation rkex.txt	6.6 kB
wagon.gs	21.0 kB
icon.tga	6.0 kB
screenshot.jpg	56.4 kB
wagon_body
wagon_body / alpha-alpha.texture.txt	45 B
wagon_body / digit_6.texture.txt	32 B
wagon_body / digit_5.texture.txt	32 B
wagon_body / alpha.tga	32.0 kB
wagon_body / grade-control-lever-tris.im	556 B
wagon_body / grade-control-lever.im	17.0 kB
wagon_body / grade-control-lever.lm.txt	211 B
wagon_body / handbrake-tris.im	560 B
wagon_body / letter_1.texture.txt	33 B
wagon_body / digit_6.tga	48.0 kB
wagon_body / handbrake.im	29.2 kB
wagon_body / load-compensating-lever-tris.im	676 B
wagon_body / digit_5.tga	48.0 kB
wagon_body / grade-control-lever.kin	2.3 kB
wagon_body / load-compensating-lever.lm.txt	219 B
wagon_body / load-compensating-lever.im	20.5 kB
wagon_body / load-compensating-lever.kin	4.1 kB
wagon_body / handbrake.lm.txt	191 B
wagon_body / handbrake.kin	7.6 kB
wagon_body / letter_1.tga	48.0 kB
wagon_body / main-main-env.texture.txt	49 B
wagon_body / mesh-step-normals.tga	192.0 kB
wagon_body / mesh-step-mesh-step-env.texture.txt	59 B
wagon_body / main-normals.texture.txt	83 B
wagon_body / mesh-step-spec.tga	192.0 kB
wagon_body / wagon.lm.txt	291 B
wagon_body / wagon_lowest.im	2.3 kB
wagon_body / mesh-step-env.tga	192.0 kB
wagon_body / mesh-step-normals.texture.txt	93 B
wagon_body / mesh-step.tga	192.0 kB
wagon_body / wagon_highest.im	1.4 MB
wagon_body / wagon_low.im	432.1 kB
wagon_body / wagon_mid.im	1.1 MB
wagon_body / main-normals.tga	12.0 MB
wagon_body / main.tga	12.0 MB
wagon_body / main-spec.tga	12.0 MB
wagon_body / main-env.tga	12.0 MB
Общий объём файлов:	52.1 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:404079:2820>	traincar	NRC RKEX T5b - 1995+	3.6	18.10.2021 20:39:21	7.0 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:60850:89100:11>	#60850	library	ACSlib	2.9	14.10.2020 19:54:33	27.2 kB
<kuid2:103475:60018:22>	#103475	mesh	VR Coupler Mesh Library	3.5	20.04.2023 14:27:03	3.6 MB
<kuid2:404079:42:1>	#404079	product	VR Load - Steel Slab 1	3.5	2.08.2020 9:46:02	1.0 MB
<kuid2:404079:1081:2>	#404079	engine	1960s 4 Axle Wagon E-spec - 2 - (TS09)	2.9	17.07.2020 9:21:17	74.2 kB
<kuid2:404079:3125:1>	#404079	bogey	WA XCW 50Ton C.S. Bogie t1 - Yellow - Dirty - Disc - 1	3.5	14.05.2023 22:32:01	2.4 MB
<kuid2:404079:3126:1>	#404079	bogey	WA XCW 50Ton C.S. Bogie t1 - Yellow - Dirty - Disc - 2	3.5	14.05.2023 22:32:01	2.5 MB
Всего связей: 6, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет