<kuid:404079:2770> VR ESX T2c SG - 1980+

Тип: traincar
Опубликовано: 20.04.2021 20:19:01
Скачиваний: 13
Размер: 6.0 MB

Скачать

The Victorian Railways ESX Wagons where built at Ballarat Workshops from July 1964 to July 1965 and Newport Workshops from April to Augest 1965, a total of 26 where built, these wagons where built for bogie exchange Steel traffic between Vic, NSW, SA and WA, this rarely happened and instead these wagons mostly stayed on the Broad Gauge and would get loads swapped between other wagons. they where put into Pipe and Swan Timber traffic and where thrown all over Victoria. In 1971 they where modified with longer draw gear and coupler shanks, ESX 15 had C channels welded on the tops to extend the height of the Stansions for Pipe traffic, going into 1977/78 they where put into Scantling Timber and Pole traffic between Dandenong, Westall and Alumatta, from 1979/80 they where put into Steel Slab Traffic between Albury and Long Island, this wagons was recoded VODX in 1980 and modified to VOEX 15 in November 1984.

This Model represents ESX 15 on Standard Gauge in modified condition with metric weights and recode from 1980, Step's created by Zec.

Mass: 23.40 tonnes (empty) 74 tonnes (loaded)
Load Capacity: 51 tonnes Distributed
Max Speed: 96km/h
Axle Load: 18.5 tonnes
Brake Cylinder: (1) 305mm x 305mm Air slack Adjuster
Brake Ratio: 34.9% (Loaded) ~ 63.4% (Empty) Load Compensating

config.txt:

kuid                                    <kuid:404079:2770>
kind                                    "traincar"
category-class                          "XG"
category-region                         "AU"
category-era                            "1980s"
engine                                  0
mass                                    23404.171875
trainz-build                            3.5
username                                "VR ESX T2c SG - 1980+"
enginespec                              <kuid2:404079:1081:2>
script                                  "wagon"
class                                   "wagon"
max-coupler-gap                         0.014
description                             "The Victorian Railways ESX Wagons where built at Ballarat Workshops from July 1964 to July 1965 and Newport Workshops from April to Augest 1965, a total of 26 where built, these wagons where built for bogie exchange Steel traffic between Vic, NSW, SA and WA, this rarely happened and instead these wagons mostly stayed on the Broad Gauge and would get loads swapped between other wagons. they where put into Pipe and Swan Timber traffic and where thrown all over Victoria. In 1971 they where modified with longer draw gear and coupler shanks, ESX 15 had C channels welded on the tops to extend the height of the Stansions for Pipe traffic, going into 1977/78 they where put into Scantling Timber and Pole traffic between Dandenong, Westall and Alumatta, from 1979/80 they where put into Steel Slab Traffic between Albury and Long Island, this wagons was recoded VODX in 1980 and modified to VOEX 15 in November 1984.

This Model represents ESX 15 on Standard Gauge in modified condition with metric weights and recode from 1980, Step's created by Zec.

Mass: 23.40 tonnes (empty) 74 tonnes (loaded)
Load Capacity: 51 tonnes Distributed
Max Speed: 96km/h
Axle Load: 18.5 tonnes
Brake Cylinder: (1) 305mm x 305mm Air slack Adjuster
Brake Ratio: 34.9% (Loaded) ~ 63.4% (Empty) Load Compensating"
author                                  "Azervich"
contact-email                           "azervich@hotmail.com"
contact-website                         "http;//www.victrainz.com.au/forum"
license                                 "Victrainz Standard License."
mesh-table
{
  default
  {
    mesh                                "wagon_body/wagon.lm"
    auto-create                         1
  }
  grade_control_lever
  {
    mesh                                "wagon_body/grade-control-lever.lm"
    anim                                "wagon_body/grade-control-lever.kin"
    auto-create                         1
  }
  load_compensating_lever
  {
    mesh                                "wagon_body/load-compensating-lever.lm"
    anim                                "wagon_body/load-compensating-lever.kin"
    auto-create                         1
  }
  couple_front
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "vr-auto-coupler-black.lm"
    anim                                "vr-auto-coupler-black.kin"
    att                                 "a.coup-f"
    auto-create                         1
  }
  couple_back
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "vr-auto-coupler-black.lm"
    anim                                "vr-auto-coupler-black.kin"
    att                                 "a.coup-r"
    auto-create                         1
  }
  hose_front
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "animated-brake-hose-left.lm"
    anim                                "animated-brake-hose-left.kin"
    att                                 "a.coup-f"
    auto-create                         1
  }
  hose_straight_front
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "animated-brake-hose-left-straight.lm"
    anim                                "animated-brake-hose-left-straight.kin"
    att                                 "a.coup-f"
    auto-create                         0
  }
  hose_back
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "animated-brake-hose-left.lm"
    anim                                "animated-brake-hose-left.kin"
    att                                 "a.coup-r"
    auto-create                         1
  }
  hose_straight_back
  {
    mesh-asset                          <kuid2:103475:60018:12>
    mesh                                "animated-brake-hose-left-straight.lm"
    anim                                "animated-brake-hose-left-straight.kin"
    att                                 "a.coup-r"
    auto-create                         0
  }
  shadow
  {
    mesh                                "shadow/shadow.lm"
    auto-create                         0
  }
}
queues
{
  end_loads
  {
    size                                2
    initial-count                       0
    allowed-products
    {
      it_wood_load                      <kuid2:88211:60000:1>
    }
    attachment-points
    {
      0                                 "a.front_load"
      1                                 "a.back_load"
    }
    conflicts-with-queues
    {
      0                                 "center_loads"
      1                                 "pipe_loads"
      2                                 "slab_loads"
    }
  }
  center_loads
  {
    size                                1
    initial-count                       0
    allowed-products
    {
      pipe_1.7x9.5m                     <kuid:404079:43>
      i-traeger_60_cm_12_m              <kuid2:72730:61016:1>
    }
    attachment-points
    {
      0                                 "a.center_load"
    }
    conflicts-with-queues
    {
      0                                 "end_loads"
      1                                 "pipe_loads"
      2                                 "slab_loads"
    }
  }
  pipe_loads
  {
    size                                4
    initial-count                       0
    allowed-products
    {
      2_foot_pipe                       <kuid2:44988:80013:1>
    }
    attachment-points
    {
      0                                 "a.pipe_01"
      1                                 "a.pipe_02"
      2                                 "a.pipe_03"
      3                                 "a.pipe_04"
    }
    conflicts-with-queues
    {
      0                                 "end_loads"
      1                                 "center_loads"
      2                                 "slab_loads"
    }
  }
  slab_loads
  {
    size                                2
    initial-count                       0
    allowed-products
    {
      steel_slab                        <kuid:404079:42>
    }
    attachment-points
    {
      0                                 "a.center_left_load"
      1                                 "a.center_right_load"
    }
    conflicts-with-queues
    {
      0                                 "end_loads"
      1                                 "center_loads"
      2                                 "pipe_loads"
    }
  }
}
extensions
{
  max_permitted_speed-60850             "96kph"
  active-coupling-standard-60850
  {
    version-major                       "2"
    version-minor                       "0"
    brakes                              "airbrake"
    front
    {
      coupler                           "knuckle"
      gangway                           "none"
      airbraketype                      "single"
      airbrakeside                      "left"
      vacbrake                          "none"
      multiple-working                  "none"
      heating-type                      "none"
      rch                               "none"
    }
    back
    {
      coupler                           "knuckle"
      gangway                           "none"
      airbraketype                      "single"
      airbrakeside                      "left"
      vacbrake                          "none"
      multiple-working                  "none"
      heating-type                      "none"
      rch                               "none"
    }
  }
}
bogeys
{
  0
  {
    bogey                               <kuid2:404079:3099:1>
    reversed                            0
    rotation-permitted                  1
    sideplay-permitted                  1
  }
  1
  {
    bogey                               <kuid2:404079:3100:1>
    reversed                            0
    rotation-permitted                  1
    sideplay-permitted                  1
  }
}
thumbnails
{
  preview
  {
    image                               "screenshot.jpg"
    width                               240
    height                              180
  }
  icon
  {
    image                               "icon.tga"
    width                               64
    height                              32
  }
}
kuid-table
{
  acslib                                <kuid2:60850:89100:5>
  enginespec                            <kuid2:404079:1081:2>
  couple_mesh                           <kuid2:103475:60018:12>
  it_wood_load                          <kuid2:88211:60000:1>
  pipe_1.7x9.5m                         <kuid:404079:43>
  i-traeger_60_cm_12_m                  <kuid2:72730:61016:1>
  2_foot_pipe                           <kuid2:44988:80013:1>
  steel_slab                            <kuid:404079:42>
  nswr_2cl_front                        <kuid2:404079:3099:1>
  nswr_2cl_back                         <kuid2:404079:3100:1>
}

Файлы:

shadow
shadow / shadow.lm.txt	134 B
shadow / shadow.im	83.8 kB
screenshot.jpg	52.2 kB
mass to kg.txt	349 B
icon.tga	6.0 kB
wagon.gs	23.3 kB
wagon_body
wagon_body / grade-control-lever.kin	2.3 kB
wagon_body / grade-control-lever.lm.txt	147 B
wagon_body / alpha-alpha.texture.txt	60 B
wagon_body / load-compensating-lever.im	20.5 kB
wagon_body / load-compensating-lever.lm.txt	151 B
wagon_body / grade-control-lever.im	17.0 kB
wagon_body / load-compensating-lever.kin	4.1 kB
wagon_body / groundplane.tga	128.5 kB
wagon_body / groundplane-groundplane.texture.txt	70 B
wagon_body / alpha.tga	128.0 kB
wagon_body / main-main-env.texture.txt	49 B
wagon_body / main-normals.texture.txt	83 B
wagon_body / mesh-step-mesh-step-env.texture.txt	59 B
wagon_body / mesh-step-env.tga	192.0 kB
wagon_body / main-normals.tga	12.0 MB
wagon_body / mesh-step-normals.texture.txt	93 B
wagon_body / wagon_lowest.im	2.8 kB
wagon_body / mesh-step-normals.tga	192.0 kB
wagon_body / wagon.lm.txt	286 B
wagon_body / mesh-step.tga	192.0 kB
wagon_body / mesh-step-spec.tga	192.0 kB
wagon_body / wagon_low.im	307.0 kB
wagon_body / wagon_highest.im	1.2 MB
wagon_body / wagon_mid.im	976.3 kB
wagon_body / main.tga	12.0 MB
wagon_body / main-spec.tga	12.0 MB
wagon_body / main-env.tga	12.0 MB
Общий объём файлов:	51.7 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:404079:2770:1>	traincar	VR ESX t2cS 1980+	3.5	17.09.2023 4:53:41	6.2 MB
<kuid:404079:2770>	traincar	VR ESX T2c SG - 1980+	3.5	20.04.2021 20:19:01	6.0 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:44988:80013:1>	#44988	product	2ft Pipe	2	13.06.2020 19:04:27	111.1 kB
<kuid2:60850:89100:11>	#60850	library	ACSlib	2.9	14.10.2020 19:54:33	27.2 kB
<kuid2:72730:61016:1>	#72730	product	I-Traeger 60 cm, 12 m	2	19.04.2023 13:04:51	248.1 kB
<kuid2:88211:60000:1>	#88211	product	IT wood load	2.4	18.04.2023 10:43:31	164.2 kB
<kuid2:103475:60018:22>	#103475	mesh	VR Coupler Mesh Library	3.5	20.04.2023 14:27:03	3.6 MB
<kuid2:404079:42:1>	#404079	product	VR Load - Steel Slab 1	3.5	2.08.2020 9:46:02	1.0 MB
<kuid:404079:43>	#404079	product	VR Load - Pipe 1.7x9.5m	3.5	14.07.2020 9:01:27	817.8 kB
<kuid2:404079:1081:2>	#404079	engine	1960s 4 Axle Wagon E-spec - 2 - (TS09)	2.9	17.07.2020 9:21:17	74.2 kB
<kuid2:404079:3099:2>	#404079	bogey	NSWR 2CL 50Ton C.S. Bogie - Black - Dirty - Disc - 1	3.5	14.05.2023 22:19:06	2.1 MB
<kuid2:404079:3100:2>	#404079	bogey	NSWR 2CL 50Ton C.S. Bogie - Black - Dirty - Disc - 2	3.5	14.05.2023 22:19:06	2.1 MB
Всего связей: 10, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет