<kuid2:368725:65100:2> NSWGR LQ semaphore, mechanical main and diverge left home and call on, 22ft wooden post with platform cantilevered left, oil lamps

Тип: Сигнал
Опубликовано: 18.10.2021 18:18:40
Скачиваний: 17
Размер: 4.3 MB

Скачать

A lower-quadrant, manually-operated, semaphore signal with 2 dolls mounted on a platform cantilevered to the left from a 22ft post. The sempaphore spectacles are illuminated at night by oil lamps.
The semaphore arms are: 1) Home Main, above 2) Call On (extended signal state 9), both on doll directly above the post; 3) Home Main to Left-diverging Loop or Branch, on doll to left of the post.
Each semaphore has a rear blind that exposes a clear rear lens on the oil lamp when the semaphore is 'on' (STOP position) and obscures it when 'off'. By observing the status of the lamp light from the rear lens, a signalman may discern at night whether the lamp is still alight and, if alight, whether the semaphore responds to its operating lever.
For correct automatic operation the signal must be used with directional feathers to uniquely identify the 2 possible paths indicated by each semaphore. Use <kuid2:60850:23901:4> 'Sig T Feather Straight' to mark the path of the Main semaphore; and <kuid2:60850:23911:4> 'Sig T Feather Left 1 (pos 1)' to mark the path of the Loop or Branch semaphore.
The call-on semaphore cannot operate automatically. A player signalman is required to decide if it is safe to call on a train. Sessions where a player is a signalman can be created using assets such as <kuid2:96148:94051:23> 'SWO Controller Rule', <kuid2:368725:90030:5> 'NSWGR mechanical lever frame for a signal box, 18-28 levers, for avatar operation' and <kuid2:368725:15000:11> 'Safeworking Officer'.
Another way to operate the call-on semaphore is by use of driver-schedule commands <kuid2:368725:60002:10> 'Set Selected Signal State' and <kuid2:368725:60003:6> 'Set Signal Ahead'.
The distance (metres) between this signal and an approaching train beyond which the signal is held at STOP can be set by the user in the Properties editor. The deefault approach distance is 1000m, and available values are 500,1000,2000,4000 and 8000.

config.txt:

kuid                                    <kuid2:368725:65100:2>
username                                "NSWGR LQ semaphore, mechanical main and diverge left home and call on, 22ft wooden post with platform cantilevered left, oil lamps"
description                             "A lower-quadrant, manually-operated, semaphore signal with 2 dolls mounted on a platform cantilevered to the left from a 22ft post. The sempaphore spectacles are illuminated at night by oil lamps.
The semaphore arms are: 1) Home Main, above 2) Call On (extended signal state 9), both on doll directly above the post; 3) Home Main to Left-diverging Loop or Branch, on doll to left of the post.
Each semaphore has a rear blind that exposes a clear rear lens on the oil lamp when the semaphore is 'on' (STOP position) and obscures it when 'off'. By observing the status of the lamp light from the rear lens, a signalman may discern at night whether the lamp is still alight and, if alight, whether the semaphore responds to its operating lever.
For correct automatic operation the signal must be used with directional feathers to uniquely identify the 2 possible paths indicated by each semaphore. Use <kuid2:60850:23901:4> 'Sig T Feather Straight' to mark the path of the Main semaphore; and <kuid2:60850:23911:4> 'Sig T Feather Left 1 (pos 1)' to mark the path of the Loop or Branch semaphore.
The call-on semaphore cannot operate automatically. A player signalman is required to decide if it is safe to call on a train. Sessions where a player is a signalman can be created using assets such as <kuid2:96148:94051:23> 'SWO Controller Rule', <kuid2:368725:90030:5> 'NSWGR mechanical lever frame for a signal box, 18-28 levers, for avatar operation' and <kuid2:368725:15000:11> 'Safeworking Officer'.
Another way to operate the call-on semaphore is by use of driver-schedule commands <kuid2:368725:60002:10> 'Set Selected Signal State' and <kuid2:368725:60003:6> 'Set Signal Ahead'.
The distance (metres) between this signal and an approaching train beyond which the signal is held at STOP can be set by the user in the Properties editor. The deefault approach distance is 1000m, and available values are 500,1000,2000,4000 and 8000."
kind                                    "mosignal"
function                                "TrackSignal"
script                                  "vsrsemaphoresignal_202008"
class                                   "VSRSemaphoreSignal"
category-class                          "WA"
category-region                         "AU"
category-era                            "1900s;1910s;1920s;1930s;1940s;1950s;1960s;1970s"
trainz-build                            4.2
trackside                               -2.75
mesh-detail-level-count                 5
mesh-table
{
  default
  {
    mesh                                "attach_pts.im"
    auto-create                         1
  }
  main_lod0
  {
    mesh                                "main_0.im"
    auto-create                         1
    lod-level                           0
  }
  main_lod1
  {
    mesh                                "main_1.im"
    auto-create                         1
    lod-level                           1
  }
  main_lod2
  {
    mesh                                "main_2.im"
    auto-create                         1
    lod-level                           2
  }
  main_lod3
  {
    mesh                                "main_3.im"
    auto-create                         1
    lod-level                           3
  }
  main_lod4
  {
    mesh                                "main_4.im"
    auto-create                         1
    lod-level                           4
  }
  arm_semaphore_main
  {
    mesh                                "arm_main.lm"
    anim                                "arm_main.kin"
    auto-create                         1
  }
  arm_semaphore_loop
  {
    mesh                                "arm_loop.lm"
    anim                                "arm_loop.kin"
    auto-create                         1
  }
  arm_semaphore_callon
  {
    mesh                                "arm_callon.lm"
    anim                                "arm_callon.kin"
    auto-create                         1
  }
}
signals
{
  0
  {
    light                               0,2,3,5,6,8
  }
  5
  {
    light                               0,2,4,6,8
  }
  8
  {
    light                               1,3,5,6,8
  }
  9
  {
    light                               0,2,3,5,7
  }
}
lights
{
  0
  {
    corona                              "corona_red.texture"
  }
  1
  {
    corona                              "corona_green.texture"
  }
  2
  {
    corona                              "corona_white.texture"
  }
  3
  {
    corona                              "corona_red.texture"
  }
  4
  {
    corona                              "corona_green.texture"
  }
  5
  {
    corona                              "corona_white.texture"
  }
  6
  {
    corona                              "corona_red_small.texture"
  }
  7
  {
    corona                              "corona_green_small.texture"
  }
  8
  {
    corona                              "corona_white.texture"
  }
}
extensions
{
  signal-has-bounce-animation-60850     0
  signal-arms-60850
  {
    0
    {
    }
    5
    {
      arm_semaphore_loop                1
    }
    8
    {
      arm_semaphore_main                1
    }
    9
    {
      arm_semaphore_callon              1
    }
  }
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
string-table
{
  prompt_approachdist                   "Track distance (metres) between this signal and an approaching train beyond which the signal is held at STOP :"
}
kuid-table
{
}

Файлы:

arm_callon.lm.txt	188 B
arm_loop.lm.txt	184 B
arm_main.lm.txt	184 B
arm_loop.kin	4.2 kB
arm_callon.kin	4.2 kB
arm_main.kin	4.2 kB
attach_pts.im	1.4 kB
corona_green.texture.txt	35 B
corona_green_small.texture.txt	41 B
corona_green.tga	16.0 kB
corona_red.texture.txt	33 B
corona_red.tga	16.0 kB
corona_red_small.texture.txt	39 B
corona_green_small.tga	16.0 kB
corona_white.texture.txt	35 B
corona_white.tga	16.0 kB
corona_red_small.tga	16.0 kB
diffuse-diffuse.texture.txt	49 B
arm_main_1.im	46.6 kB
arm_callon_1.im	42.9 kB
arm_callon_0.im	95.7 kB
arm_loop_1.im	38.1 kB
arm_loop_0.im	98.1 kB
arm_main_0.im	99.7 kB
main_4.im	55.7 kB
normal-normal.texture.txt	72 B
main_3.im	102.3 kB
main_2.im	229.1 kB
shunt_semaphore_diffuse-shunt_semaphore_diffuse.texture.txt	81 B
main_1.im	299.6 kB
main_0.im	454.3 kB
shunt_semaphore_normal-shunt_semaphore_normal.texture.txt	104 B
thumbnail.jpg	13.3 kB
vsrsemaphoresignal_202008.gs	27.4 kB
shunt_semaphore_diffuse.tga	1.0 MB
shunt_semaphore_normal.tga	1.0 MB
diffuse.tga	4.0 MB
normal.tga	4.0 MB
Общий объём файлов:	11.7 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:368725:65100:2>	mosignal	NSWGR LQ semaphore, mechanical main and diverge left home and call on, 22ft wooden post with platform cantilevered left, oil lamps	4.2	18.10.2021 18:18:40	4.3 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет