<kuid:368725:30133> NSWGR catenary wire spline for sharply-curving track

Тип: track
Опубликовано: 23.07.2020 20:17:14
Скачиваний: 16
Размер: 47.7 kB

Скачать

A catenary wire spline for sharply-curving track.
To maintain contact on sharp curves between pantographs and the pickup wire, a spline point should be added every 25m.
Suitable for track with a curvature radius between 200 and 450m. For gentler curves use <kuid:368725:30132>. The default height of the pickup wire above the railtop is 5.3m, midway within the NSW operating range of 4.75 to 5.8m.
The model meshes are based on those in a workbook provided by David Owen (davido). Thanks to David for sharing his work.

config.txt:

kuid                                    <kuid:368725:30133>
username                                "NSWGR catenary wire spline for sharply-curving track"
description                             "A catenary wire spline for sharply-curving track.
To maintain contact on sharp curves between pantographs and the pickup wire, a spline point should be added every 25m.
Suitable for track with a curvature radius between 200 and 450m. For gentler curves use <kuid:368725:30132>. The default height of the pickup wire above the railtop is 5.3m, midway within the NSW operating range of 4.75 to 5.8m.
The model meshes are based on those in a workbook provided by David Owen (davido). Thanks to David for sharing his work."
kind                                    "track"
trainz-build                            4.5
isroad                                  1
istrack                                 0
istunnel                                0
carrate                                 0
surveyor-only                           0
visible-on-minimap                      1
category-era                            "1930s;1940s;1950s;1960s;1970s;1980s"
category-region                         "00"
category-class                          "SS"
category-keyword                        "spline;catenary"
mesh-table
{
  catenary_lod0
  {
    mesh                                "catenary-lod0.im"
  }
  catenary_lod1
  {
    mesh                                "catenary-lod1.im"
  }
  catenary_lod2
  {
    mesh                                "catenary-lod2.im"
  }
}
track
{
  mesh-length                           25
  adjust-cross-section-to-ground        0
  adjust-height-to-ground-threshold     3
  adjust-height-to-ground-offset        -0.1
  follows-spline-gradient               1
  coordinate-transformation             "linear"
  track-lod-tree
  {
    lod-distance                        100
    high-detail
    {
      lod-distance                      50
      high-detail
      {
        mesh                            "catenary_lod0"
      }
      low-detail
      {
        mesh                            "catenary_lod1"
      }
    }
    low-detail
    {
      mesh                              "catenary_lod2"
    }
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
}

Файлы:

wire.texture.txt	27 B
catenary-lod2.im	3.7 kB
catenary-lod0.im	18.4 kB
catenary-lod1.im	15.8 kB
thumbnail.jpg	18.4 kB
wire.tga	48.0 kB
Общий объём файлов:	104.4 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:368725:30133>	track	NSWGR catenary wire spline for sharply-curving track	4.5	23.07.2020 20:17:14	47.7 kB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет