<kuid2:276733:1085:3> te3_cab-ud

Тип: Кабина
Опубликовано: 19.04.2015 9:25:16
Скачиваний: 1244
Размер: 5.9 MB

Скачать

config.txt:

category-class                          "ZI"
script                                  "te3_cabin.gs"
class                                   "te3_cab"
kind                                    "interior"
trainz-build                            2.9
username                                "te3_cab-ud"
category-region                         "RU"
category-era                            "2000s"
cameradefault                           0
license                                 "free for non-commercial use"
mesh-table
{
  default
  {
    mesh                                "Cabte3.im"
    anim                                "Cabte3.kin"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "traction.im"
    auto-create                         1
    att                                 "a.traction"
    notches                             0,0.066,0.133,0.2,0.266,0.333,0.4,0.466,0.533,0.6,0.666,0.733,0.8,0.866,0.933,1
    notchheight                         1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    radius                              0.35
    mousespeed                          -0.5
    angles                              0,2.2
    limits                              0,15
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "revers.im"
    auto-create                         1
    att                                 "a.revers"
    limits                              0,2
    angles                              0,1.25
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.14
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "bigtorm.IM"
    att                                 "a.bigtorm"
    limits                              0,4
    angles                              0,-2
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,2,2,2,2,1,1
    radius                              0.15
    att-parent                          "default"
  }
  independantbrake_lever
  {
    mesh                                "smalltorm.IM"
    att                                 "a.smalltorm"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.2
    limits                              0,32
    att-parent                          "default"
    notches                             0,0.3,0.5,0.7,1
    notchheight                         1,2,2,2,1
    radius                              0.15
    test-collisions                     1
    mousespeed                          -1
  }
  ukbm_rb
  {
    mesh                                "pbz.IM"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pbz"
    limits                              0,1
    angles                              0,0.006
    mousespeed                          15
    value                               1
  }
  horn
  {
    kind                                "lever"
    mesh                                "horn.IM"
    att                                 "a.horn"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  svistok
  {
    kind                                "lever"
    mesh                                "horn.IM"
    att                                 "a.horn1"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  horn1
  {
    kind                                "lever"
    mesh                                "horn.IM"
    att                                 "a.horn2"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  svistok1
  {
    kind                                "lever"
    mesh                                "horn.IM"
    att                                 "a.horn3"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  knopka
  {
    mesh                                "knopka.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka1
  {
    mesh                                "knopka1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka1"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka2
  {
    mesh                                "knopka2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka2"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka3
  {
    mesh                                "knopka2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka3"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka4
  {
    mesh                                "knopka2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka4"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka5
  {
    mesh                                "knopka1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka5"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka6
  {
    mesh                                "knopka1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka6"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka7
  {
    mesh                                "knopka2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka7"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka8
  {
    mesh                                "knopka2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka8"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka9
  {
    mesh                                "knopka.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka9"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka10
  {
    mesh                                "knopka.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka10"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka11
  {
    mesh                                "knopka.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka11"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  knopka12
  {
    mesh                                "knopka.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka12"
    limits                              0,1
    angles                              0,0.02
    mousespeed                          15
  }
  bplocomain_needle
  {
    mesh                                "needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_needle"
    limits                              0,1600
    angles                              0.1,4.6
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakepipe_needle"
    limits                              0,1600
    angles                              0.1,6.5
    att-parent                          "default"
  }
  bploco_equaliser
  {
    mesh                                "needle2.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain"
    limits                              0,1600
    angles                              0.1,7.6
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedo_needle.IM"
    att                                 "a.speedo_needle"
    limits                              0,48
    att-parent                          "default"
  }
  tempermasla1_needle
  {
    mesh                                "needle3.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needles"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  tempervodi2_needle
  {
    mesh                                "needle3.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needles1"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  tempervodi1_needle
  {
    mesh                                "needle4.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needles2"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  temperkontakt_needle
  {
    mesh                                "needle4.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needles3"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  davlenie_needle
  {
    mesh                                "needle4.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needles4"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "needle5.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakecylinder_needle"
    limits                              0,1600
    angles                              0.1,7
    att-parent                          "default"
  }
  davlenietopl1_needle
  {
    mesh                                "needle5.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needles5"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  davleniemasla1_needle
  {
    mesh                                "needle5.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needles6"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  voltmeter_needle
  {
    mesh                                "needle6.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle7"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  voltmeter_needle1
  {
    mesh                                "needle6.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle8"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  voltmeter_needle2
  {
    mesh                                "needle6.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle9"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
  knop
  {
    mesh                                "Knop.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knop"
    limits                              0,1
    angles                              0,0.008
    mousespeed                          15
    value                               1
  }
  knop1
  {
    mesh                                "Knop1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knop1"
    limits                              0,1
    angles                              0,0.006
    mousespeed                          15
    value                               1
  }
  slidingwindowl
  {
    mesh                                "win_l.IM"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.win_l"
    limits                              0,1
    angles                              0,0.65
    value                               1
    mousespeed                          -1
  }
  slidingwindowr
  {
    mesh                                "win_r.IM"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.win_r"
    limits                              0,1
    angles                              0,0.65
    value                               1
    mousespeed                          -1
  }
  bdit1
  {
    mesh                                "Bdit1.im"
    att                                 "a.bdit1"
    kind                                "light"
    light                               1
    auto-create                         0
  }
  bdit2
  {
    mesh                                "Bdit2.im"
    att                                 "a.bdit2"
    kind                                "light"
    light                               1
    auto-create                         0
  }
  bdit3
  {
    mesh                                "Bdit3.im"
    att                                 "a.bdit3"
    kind                                "light"
    light                               1
    auto-create                         0
  }
  als_0
  {
    mesh                                "a_g.im"
    att                                 "a.0"
    kind                                "light"
    light                               1
  }
  als_1
  {
    mesh                                "a_y.im"
    att                                 "a.1"
    kind                                "light"
    light                               1
  }
  als_2
  {
    mesh                                "a_yr.im"
    att                                 "a.2"
    kind                                "light"
    light                               1
  }
  als_3
  {
    mesh                                "a_r.im"
    att                                 "a.3"
    kind                                "light"
    light                               1
  }
  als_4
  {
    mesh                                "a_w.im"
    att                                 "a.4"
    kind                                "light"
    light                               1
  }
  tumbler
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumbler1
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler1"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumbler2
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler2"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumbler3
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler3"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumbler4
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler4"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumbler5
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler5"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumbler6
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler6"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumbler7
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler7"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumbler8
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler8"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumblervvv
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler9"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumblervvv1
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler10"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumblerzzz1
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler11"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumblerzzz2
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler12"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumblerzzz3
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler13"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumblerzzz4
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler14"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumblerzzz5
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler15"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  tumblerzzz6
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler16"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  racia
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.Racia"
    auto-create                         1
    limits                              0,1
    angles                              0,0.3
    notches                             0,0.5
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          1
  }
  epk
  {
    mesh                                "kluch-epk.IM"
    att                                 "a.kluch-epk"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.2
    limits                              0,32
    att-parent                          "default"
    notches                             0,0.3,0.5,0.7,1
    notchheight                         0.001,0.001,0.001,0.001,0.001
    radius                              0.15
    mousespeed                          -1
    tooltip-text                        "ЭПК"
  }
  svetshkal
  {
    mesh                                "Svetshkal.im"
    att                                 "a.Svetshkal"
    kind                                "light"
    light                               1
    auto-create                         0
  }
  batareya_needle
  {
    mesh                                "batareya.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.batareya"
    limits                              0,1000
    angles                              0,2
    att-parent                          "default"
    value                               -2
  }
}
cameralist
{
  camera0                               -1.016,0.461,0.046,0,0
  camera1                               -0.665,0.596,0.196,6.34,-0.063
  camera2                               0.731,0.592,0.196,6.227,-0.001
  camera3                               -0.795,0.679,0.196,7.238,-0.124
  camera4                               0.9,0.689,0.196,5.502,-0.106
}
kuid                                    <kuid2:276733:1085:3>
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
}

Файлы:

alsn-alsn.texture.txt	27 B
alsn.jpg	46.5 kB
a_g.im	1.5 kB
a_r.im	1.5 kB
a_w.im	1.5 kB
a_y.im	1.5 kB
a_yr.im	1.5 kB
batareya.im	1.1 kB
bdit-bdit.texture.txt	27 B
bdit.jpg	203.0 kB
bdit1.im	1.2 kB
bdit2.im	1.2 kB
bdit3.im	1.2 kB
bigtorm.im	17.7 kB
cabte3.im	1.8 MB
cabte3.kin	35.4 kB
dinamic-dinamic.texture.txt	30 B
dinamic.jpg	33.3 kB
dver1-dver1.texture.txt	28 B
dver1.jpg	126.6 kB
dver2-dver2.texture.txt	28 B
dver2.jpg	44.7 kB
dver3-dver3.texture.txt	28 B
dver3.jpg	31.8 kB
horn.im	10.2 kB
kluch-epk.im	4.8 kB
knop.im	952 B
knop1.im	952 B
knopka.im	4.1 kB
knopka1.im	4.1 kB
knopka2.im	4.1 kB
kozirok-kozirok.texture.txt	30 B
kozirok.jpg	42.0 kB
kran 254-kran 254.texture.txt	31 B
kran 254.jpg	63.7 kB
kran-kran.texture.txt	27 B
kran.jpg	113.4 kB
krani-krani.texture.txt	28 B
krani.jpg	11.3 kB
lampa-lampa.texture.txt	28 B
lampa.jpg	55.4 kB
motori-motori.texture.txt	29 B
motori.jpg	69.1 kB
needle.im	3.2 kB
needle1.im	3.2 kB
needle2.im	3.2 kB
needle3.im	602 B
needle4.im	602 B
needle5.im	2.3 kB
needle6.im	488 B
ogni-ogni.texture.txt	27 B
ogni.jpg	54.9 kB
ogni1.texture.txt	28 B
ogni1.tga	192.0 kB
okno-okno.texture.txt	27 B
okno.jpg	63.1 kB
panel0-panel0.texture.txt	29 B
panel0.jpg	156.9 kB
panel1-panel1.texture.txt	29 B
panel1.jpg	58.7 kB
panel2-panel2.texture.txt	29 B
panel2.jpg	73.5 kB
panel3-panel3.texture.txt	29 B
panel3.jpg	131.4 kB
patch-patch.texture.txt	28 B
patch.jpg	176.5 kB
pbz.im	3.6 kB
per-per.texture.txt	26 B
per.jpg	307.2 kB
pered-pered.texture.txt	28 B
pered.jpg	92.4 kB
pol-pol.texture.txt	26 B
pol.jpg	59.2 kB
pom-pom.texture.txt	26 B
pom.jpg	172.8 kB
pom1-pom1.texture.txt	27 B
pom1.jpg	54.9 kB
potolok-potolok.texture.txt	30 B
potolok.jpg	217.2 kB
potolok1-potolok1.texture.txt	31 B
potolok1.jpg	214.7 kB
progector-progector.texture.txt	32 B
progector.jpg	28.9 kB
racia1-racia1.texture.txt	29 B
racia1.jpg	62.9 kB
racia2-racia2.texture.txt	29 B
racia2.jpg	51.5 kB
rb-rb.texture.txt	25 B
rb.jpg	26.1 kB
revers.im	5.2 kB
reyki-reyki.texture.txt	28 B
reyki.jpg	132.3 kB
rucka-rucka.texture.txt	28 B
rucka.jpg	42.0 kB
shkali-shkali.texture.txt	29 B
shkali.jpg	594.1 kB
shkali2-shkali2.texture.txt	30 B
shkali2.jpg	179.4 kB
shkali3-shkali3.texture.txt	30 B
shkali3.jpg	38.2 kB
shkali4-shkali4.texture.txt	30 B
shkali4.jpg	27.1 kB
sidenie-sidenie.texture.txt	30 B
sidenie.jpg	45.8 kB
skor-skor.texture.txt	27 B
skor.jpg	73.2 kB
smalltorm.im	12.6 kB
sound
sound / cabin.txt	948 B
sound / reverser.wav	12.0 kB
sound / switch.wav	4.0 kB
sound / throttle.wav	16.4 kB
speedo_needle.im	2.6 kB
st-st1.texture.txt	40 B
st.jpg	11.3 kB
st1.jpg	13.2 kB
steclo-steclo1.texture.txt	48 B
steclo.tga	768.0 kB
steclo1.tga	768.0 kB
steni-steni.texture.txt	28 B
steni.jpg	699.6 kB
strelki-strelki.texture.txt	30 B
strelki.jpg	42.8 kB
svetshkal.im	10.3 kB
tabl-tabl.texture.txt	27 B
tabl.jpg	110.7 kB
te3_cabin.gs	6.6 kB
thumbnail.jpg	35.8 kB
traction.im	17.7 kB
trubki-trubki.texture.txt	29 B
trubki.jpg	58.8 kB
tumbler.im	2.1 kB
tumbler1.im	2.1 kB
tumbler2.im	3.2 kB
win_l.im	13.2 kB
win_r.im	13.2 kB
zamki-zamki.texture.txt	28 B
zamki.jpg	34.3 kB
zamki1-zamki1.texture.txt	29 B
zamki1.jpg	32.3 kB
Общий объём файлов:	8.6 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:276733:1085:3>	interior	te3_cab-ud	2.9	19.04.2015 9:25:16	5.9 MB
<kuid:276733:1085>	interior	te3_cab-ud	2.5	25.06.2020 16:54:00	9.7 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:276733:100481>	#276733	traincar	TE3-6450	2.9	25.06.2020 16:55:39	7.9 MB
<kuid2:276733:100481:5>	#276733	traincar	TE3-6450_TS12	3.5	22.02.2017 18:20:45	949.4 kB
<kuid:276733:100482>	#276733	traincar	TE3-6542	2.9	25.06.2020 16:55:42	9.2 MB
<kuid2:276733:100482:5>	#276733	traincar	TE3-6542_TS12	3.5	22.02.2017 18:20:45	2.2 MB
<kuid:276733:100483>	#276733	traincar	TE3-7801	2.9	25.06.2020 16:56:08	10.2 MB
<kuid2:276733:100483:5>	#276733	traincar	TE3-7801_TS12	3.5	19.04.2015 9:25:16	3.1 MB
<kuid:276733:100484>	#276733	traincar	TE3-7643	2.9	25.06.2020 16:56:08	7.8 MB
<kuid2:276733:100484:5>	#276733	traincar	TE3-7643_TS12	3.5	22.02.2017 18:20:45	837.3 kB
<kuid:276733:100485>	#276733	traincar	TE7-080	2.9	25.06.2020 16:56:08	10.3 MB
<kuid2:276733:100485:5>	#276733	traincar	TE7-080_TS12	3.5	22.02.2017 18:20:45	3.1 MB