<kuid:276266:100387> SH Metro AC01A Cab

Тип: Кабина
Опубликовано: 25.08.2023 10:54:56
Скачиваний: 22
Размер: 9.5 MB
Скачать

A cab of AC-01 train which operated on Shanghai Metro Line 1. This cab references to a real scale model of the cab which exhibited in Shanghai Metro Museum.
config.txt:
kuid                                    <kuid:276266:100387>
username                                "SH Metro AC01A Cab"
trainz-build                            3.4
category-class                          "ZI"
kind                                    "interior"
cameradefault                           0
category-era                            "1990s;2000s;2010s"
category-region                         "CN"
author                                  "Ocemy Liew"
contact-email                           "ocemy@hotmail.com"
contact-website                         "http://www.ocemy.com"
description                             "A cab of AC-01 train which operated on Shanghai Metro Line 1. This cab references to a real scale model of the cab which exhibited in Shanghai Metro Museum."
description-cn                          "上海地铁1号线AC01型列车司机室。一个简单的司机室设置。"
enable-shadows-in-cab                   1
interior-controls-type                  "full"
thumbnails
{
  0
  {
    image                               "int_art/preview_cab.jpg"
    width                               240
    height                              180
  }
}
mesh-table
{
  default
  {
    mesh                                "int_body/int_body.im"
    auto-create                         1
  }
  throttle_brake_lever
  {
    mesh                                "int_body/throttle_lever.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.throttle"
    kind                                "lever"
    angles                              -1.044,1.044
    limits                              0,16
    notches                             0,0.0625,0.125,0.1875,0.25,0.3125,0.375,0.4375,0.5,0.5625,0.625,0.6875,0.75,0.8125,0.875,0.9375,1
    notchheight                         1,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,1
    radius                              0.2
    mousespeed                          -1
  }
  reverser_lever
  {
    mesh                                "int_body/reverser_lever.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.reverser"
    kind                                "lever"
    angles                              0.522,-0.522
    limits                              0,2
    notches                             0,0.5,1
    notchheight                         2,1,2
    radius                              0.15
    mousespeed                          1
  }
  speedo_needle
  {
    mesh                                "int_body/speed_needle.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.speedmeter"
    kind                                "needle"
    angles                              0,4.176
    limits                              0,27.799999
  }
  speed_lim_needle
  {
    mesh                                "int_body/speed_lim_needle.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.speed_limit"
    kind                                "needle"
    angles                              0,4.176
    limits                              0,27.799999
  }
  bplocomain_needle
  {
    mesh                                "int_body/white_needle.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.white_needle"
    kind                                "needle"
    angles                              0,4.698
    limits                              0,1180
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "int_body/red_needle.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.red_needle"
    kind                                "needle"
    angles                              0,4.698
    limits                              0,1180
  }
  switch_00
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_00"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,0.5,1
    notchheight                         2,1,2
    radius                              0.08
  }
  switch_01
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_01"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_02
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_02"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  light_switch
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_03"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_04
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_04"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_05
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_05"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_06
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_06"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_07
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_07"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_08
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_08"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_09
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_09"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_10
  {
    mesh                                "int_body/switch_red.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_10"
    kind                                "lever"
    angles                              0,-1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_11
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_11"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_12
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_12"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_13
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_13"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_14
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_14"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_15
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_15"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  switch_16
  {
    mesh                                "int_body/switch_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.toggle_16"
    kind                                "lever"
    angles                              0,1.556
    limits                              0,1
    notches                             0,1
    notchheight                         2,2
    radius                              0.08
  }
  indicator_01
  {
    mesh                                "int_body/indicator_red.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.indicator_01"
  }
  indicator_02
  {
    mesh                                "int_body/indicator_red.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.indicator_02"
  }
  indicator_03
  {
    mesh                                "int_body/indicator_red.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.indicator_03"
  }
  indicator_04
  {
    mesh                                "int_body/indicator_red.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.indicator_04"
  }
  indicator_05
  {
    mesh                                "int_body/indicator_green.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.indicator_05"
  }
  indicator_06
  {
    mesh                                "int_body/indicator_white.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.indicator_06"
  }
  indicator_07
  {
    mesh                                "int_body/indicator_red.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.indicator_07"
  }
  indicator_08
  {
    mesh                                "int_body/indicator_red.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.indicator_08"
  }
  pantograph_lever
  {
    mesh                                "int_body/button_white.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button3_01"
    kind                                "pullrope"
    limits                              0,1
    angles                              0,-0.01
    notches                             0,1
    notchheight                         3,3
    radius                              0.05
  }
  button3_02
  {
    mesh                                "int_body/button_white.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button3_02"
    kind                                "pullrope"
    limits                              0,1
    angles                              0,-0.01
    notches                             0,1
    notchheight                         3,3
    radius                              0.05
  }
  button3_03
  {
    mesh                                "int_body/button_white.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button3_03"
    kind                                "pullrope"
    limits                              0,1
    angles                              0,-0.01
    notches                             0,1
    notchheight                         3,3
    radius                              0.05
  }
  button3_04
  {
    mesh                                "int_body/button_white.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button3_04"
    kind                                "pullrope"
    limits                              0,1
    angles                              0,-0.01
    notches                             0,1
    notchheight                         3,3
    radius                              0.05
  }
  button3_05
  {
    mesh                                "int_body/button_red.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button3_05"
    kind                                "pullrope"
    limits                              0,1
    angles                              0,-0.01
    notches                             0,1
    notchheight                         3,3
    radius                              0.05
  }
  button3_06
  {
    mesh                                "int_body/button_green.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button3_06"
    kind                                "pullrope"
    limits                              0,1
    angles                              0,-0.01
    notches                             0,1
    notchheight                         3,3
    radius                              0.05
  }
  button3_07
  {
    mesh                                "int_body/button_green.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button3_07"
    kind                                "pullrope"
    limits                              0,1
    angles                              0,-0.01
    notches                             0,1
    notchheight                         3,3
    radius                              0.05
  }
  horn
  {
    mesh                                "int_body/button_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button3_09"
    kind                                "pullrope"
    limits                              0,1
    angles                              0,-0.01
    notches                             0,1
    notchheight                         3,3
    radius                              0.2
  }
  button3_10
  {
    mesh                                "int_body/button_black.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button3_10"
    kind                                "pullrope"
    limits                              0,1
    angles                              0,-0.01
    notches                             0,1
    notchheight                         3,3
    radius                              0.05
  }
  button3_11
  {
    mesh                                "int_body/button_white.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.button3_11"
    kind                                "pullrope"
    limits                              0,1
    angles                              0,-0.01
    notches                             0,1
    notchheight                         3,3
    radius                              0.05
  }
  rear_switch_01
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_01"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_02
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_02"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_03
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_03"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_04
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_04"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_05
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_05"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_06
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_06"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_07
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_07"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_08
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_08"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_09
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_09"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_10
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_10"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_11
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_11"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_12
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_12"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_13
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_13"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_14
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_14"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_15
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_15"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_16
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_16"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_17
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_17"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_18
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_18"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_19
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_19"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_20
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_20"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_21
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_21"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_22
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_22"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_23
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_23"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_24
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_24"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_25
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_25"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_26
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_26"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_27
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_27"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_28
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_28"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_29
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_29"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_30
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_30"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_31
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_31"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_32
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_32"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_33
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_33"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_34
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_34"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_35
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_35"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_36
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_36"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_37
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_37"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_38
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_38"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_39
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_39"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_40
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_40"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_41
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_41"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_42
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_42"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_43
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_43"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_44
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_44"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_45
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_45"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_46
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_46"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_47
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_47"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_48
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_48"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_49
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_49"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_50
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_50"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  rear_switch_51
  {
    mesh                                "int_body/rear_switch_01.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rear_switch_51"
    kind                                "lever"
    angles                              -0.778,0.778
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
    limits                              0,1
  }
  wipers
  {
    mesh                                "int_body/wipers.im"
    att-parent                          "default"
    att                                 "a.wipers"
    auto-create                         1
  }
}
cameralist
{
  camera0                               -0.834,-11.488,0.418,-0,-0.128
  camera1                               -0.834,-11.488,0.716,0.134,-0.146
  camera2                               0.984,-11.681,0.716,-6.274,-0.197
  camera3                               0.984,-11.681,0.716,-6.286,-0.75
}
kuid-table
{
}
Файлы:
int_art
int_art / preview_cab.jpg	29.4 kB
int_body
int_body / button_black.im	736 B
int_body / button_green.im	736 B
int_body / cab_acc.texture.txt	30 B
int_body / button_red.im	736 B
int_body / button_white.im	736 B
int_body / cab_body.texture.txt	31 B
int_body / indicator_red.im	3.8 kB
int_body / ref3.texture.txt	27 B
int_body / speed_lim_needle.im	482 B
int_body / speed_needle.im	632 B
int_body / reverser_lever.im	10.5 kB
int_body / switch_black.im	6.8 kB
int_body / switch_red.im	5.1 kB
int_body / white_needle.im	1.1 kB
int_body / wipers.kin	6.8 kB
int_body / throttle_lever.im	11.9 kB
int_body / rear_switch_01.im	1.2 kB
int_body / indicator_white.im	3.8 kB
int_body / indicator_green.im	3.8 kB
int_body / wipers.im	30.0 kB
int_body / cab_switch.texture.txt	33 B
int_body / ref3.jpg	89.0 kB
int_body / red_needle.im	1.1 kB
int_body / cab_switch.tga	48.0 kB
int_body / int_body.im	556.5 kB
int_body / cab_acc.tga	12.0 MB
int_body / cab_body.tga	12.0 MB
Общий объём файлов:	24.8 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid2:276266:100387:3>	interior	SH Metro AC01A Cab	3.9	18.10.2021 19:22:52	9.5 MB
<kuid:276266:100387>	interior	SH Metro AC01A Cab	3.4	25.08.2023 10:54:56	9.5 MB
Зависимости:
kuid	author	kind	name	build	date	size
Нет
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid2:276266:100376:1>	#276266	traincar	Shanghai Metro AC01-A	3.5	12.07.2020 20:52:37	9.1 MB
<kuid2:276266:100435:1>	#276266	traincar	Shanghai Metro AC01-A(rear)	3.5	12.07.2020 20:52:41	9.1 MB