<kuid2:210518:6572:1> New_Hi-Capy_Flat_2_Body

Тип: traincar
Опубликовано: 12.01.2021 22:53:56
Скачиваний: 12
Размер: 150.8 kB

Скачать

This is the car body for the second in a series of high capacity depressed center flat cars
using bdneals 8-wheel buckeye trucks (kuid2:96914:50195:3) which can be downloaded from his
site (Subpar Productions) in the 2-6-6-6 common pack. Many thanks to him for letting me use
them. There is an attachement point (a.load0) in the center of the car body for those who
would like to make it interactive for the load of your choice. The letterings text, color,
and size can be changed by manipulating the values in the effects section of the config files
mesh table. The screenshot shows the assenbled traincar.
This car must be assembeled in Sureveyor:
1. Place this item on the track.
2. Place two New Hi-Capy_Flat 2 Bolster (kuid2:210518:6573:1) on the track a little past each
end of this item.
3. Rotate one 180 degrees as needed.
4. Move the bolsters towards the car body until they couple. When done properly there should only
be one red and one green arrow and the assembly should move as a unit.

config.txt:

kuid                                    <kuid2:210518:6572:1>
kind                                    "traincar"
trainz-build                            2.9
engine                                  0
mass                                    50000
enginespec                              <kuid:-1:42004201>
bogeys
{
  0
  {
    bogey                               <kuid:-10:149>
    reversed                            0
    sideplay-permitted                  0
    rotation-permitted                  1
  }
  1
  {
    bogey                               <kuid:-10:149>
    reversed                            0
    sideplay-permitted                  0
    rotation-permitted                  1
  }
}
mesh-table
{
  default
  {
    mesh                                "Part_1.im"
    auto-create                         1
    effects
    {
      0
      {
        kind                            "name"
        fontsize                        0.18
        fontcolor                       255,255,255
        att                             "a.name0"
        name                            "RR NAME"
      }
      1
      {
        kind                            "name"
        fontsize                        0.18
        fontcolor                       255,255,255
        att                             "a.name1"
        name                            "RR NAME"
      }
      2
      {
        kind                            "name"
        fontsize                        0.18
        fontcolor                       255,255,255
        att                             "a.name2"
        name                            "CAR NUM"
      }
      3
      {
        kind                            "name"
        fontsize                        0.18
        fontcolor                       255,255,255
        att                             "a.name3"
        name                            "CAR NUM"
      }
    }
  }
  shadow
  {
    mesh                                "shadow.im"
  }
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "New Hi-Capy Flat 2.jpg"
    width                               240
    height                              180
  }
}
username                                "New_Hi-Capy_Flat_2_Body"
description                             "This is the car body for the second in a series of high capacity depressed center flat cars
		 using bdneals 8-wheel buckeye trucks (kuid2:96914:50195:3) which can be downloaded from his
		 site (Subpar Productions) in the 2-6-6-6 common pack. Many thanks to him for letting me use
		 them. There is an attachement point (a.load0) in the center of the car body for those who
		 would like to make it interactive for the load of your choice. The letterings text, color,
		 and size can be changed by manipulating the values in the effects section of the config files
		 mesh table. The screenshot shows the assenbled traincar.
		 This car must be assembeled in Sureveyor:
		 1.  Place this item on the track.
		 2.  Place two New Hi-Capy_Flat 2 Bolster (kuid2:210518:6573:1) on the track a little past each
		     end of this item.
		 3.  Rotate one 180 degrees as needed.
		 4.  Move the bolsters towards the car body until they couple. When done properly there should only 
		     be one red and one green arrow and the assembly should move as a unit."
category-class                          "PC"
author                                  "Benjamin R. Dorsey (bendorsey)"
contact-email                           "bendorsey@bellsouth.net"
license                                 "This item is released free of charge for your enjoyment. You may use, redistribute,
and re-skin the model as long as you do not do so for profit or include it in any package for profit."
kuid-table
{
  0                                     <kuid2:30671:90102101:1>
  1                                     <kuid:-10:149>
  2                                     <kuid:-1:42004201>
}

Файлы:

black.bmp	246 B
black.texture.txt	28 B
new hi-capy flat 2.jpg	12.7 kB
part_1.im	398.9 kB
shadow.im	112.8 kB
Общий объём файлов:	524.7 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:210518:6572:1>	traincar	New_Hi-Capy_Flat_2_Body	2.9	12.01.2021 22:53:56	150.8 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-10:149>	#-10	bogey	Тележка_невидимая	0	18.04.2023 0:03:42	1.4 kB
<kuid:-1:42004201>	#-1	engine	Типовой вагон	0	1.03.2023 22:53:14	2.4 kB
<kuid2:30671:90102101:2>	#30671	product	Cattle	2	20.06.2020 23:17:00	71.6 kB
Всего связей: 3, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет